Comprehensive Lighting Audit Sample Clauses

Comprehensive Lighting Audit. Upon receipt of the County’s Notice To Proceed, the Contractor will conduct a comprehensive lighting audit (“Comprehensive Lighting Audit”) for each Facility in the format defined in Exhibit E-4. The Comprehensive Lighting Audit shall identify changes in the work proposed by the Contractor in the Preliminary Lighting Audit. A Change Order shall incorporate the Comprehensive Lighting Audit into this Agreement. The unit costs for each item shall be the same for both the Preliminary and for the Comprehensive Lighting Audits. Any requested changes in Scope of Work from the Preliminary to the Comprehensive Lighting Audits must be made in writing itemizing each change. Changes are approved after receiving the County’s written approval. At a minimum, the Comprehensive Lighting Audit shall verify the following information for the facility: 1) An inventory of the existing lighting fixtures and lamps for each floor or space with separate line entries for each room, or area where there is no room number; type of fixture and lamp; and the corresponding fixture wattage for each fixture type. 2) An itemized list of any changes in the proposed Scope of Work from the Preliminary Lighting Audit and the reason for the change. 3) The nomenclature used to describe existing lighting in the Preliminary Lighting Audit must be used must be consistently used in the comprehensive lighting audit and described in a legend. The legend must be able to tie/link the preliminary and comprehensive lighting audit descriptions of lighting equipment. If the description of existing lighting is not indicated on the Preliminary Lighting Audit a new description will be permitted. 4) A definition of baseline energy consumption using the information provided in the Preliminary Lighting Audits. 5) The methodology and calculations to be utilized to measure and verify the actual energy savings achieved when the retrofit work is completed.