Ceiling Tiles Sample Clauses

Ceiling Tiles. Any installation or relocation of ceiling tiles is at Tenant's expense.
Sample 1Sample 2
AutoNDA by SimpleDocs
Ceiling Tiles. Tenant Responsibility
Sample 1
Ceiling Tiles. 3.1 Access tiles and/or panels must be located under all equipment, including junction boxes.
Sample 1
Ceiling Tiles. Replace stained or broken tiles where necessary; touch-up paint beams if needed.
Sample 1
Ceiling Tiles. Ceiling tiles shall be equal to United States Gypsum Omni Fissured, white, tegular edge, 2x2' lay in panels.
Sample 1
Ceiling Tiles. Proprietary suspended ceilings NOTE: Electrical light fittings, diffusers, panels, etc. generally are "lay in" units of the same dimensions as the suspension grid described and allowance must be made accordingly for their support inclusive of any flexibility in setting out that may be required (ceiling panels have not been deducted and pricing is to take cognisance thereof). --- Ceiling comprising 595 x 595 x 9mm thick Gyprex Fissured ceiling tiles backed with 25mm thick polystyrene insulation, fissured white finish, suspended on, and including, "Xxxx QRC T38V" tee suspension system with main tees at 1200mm centres and cross tees between each tile at 600mm centres all according to manufactures specifications, including hold-down clips, galvanised hangers, etc. 36 898 Ceilings suspended not exceeding 1000mm below steel purlins which are at centres exceeding 1200mm and not exceeding 1400mm. m² 218 37 263 Extra over ceiling for opening for sprinkler head. No 60 37 628 Extra over ceiling for opening for 600 x 600mm light fitting. No 40 37 993 Extra over ceiling for 600 x 600mm opening for ventilation grille/air conditioning diffuser No 20 Ceiling comprising 1195 x 595 x 9mm thick Gyprex Fissured ceiling tiles backed with 25mm thick polystyrene insulation, fissured white finish, suspended on, and including, "Xxxx QRC T38V" tee suspension system with main tees at 1200mm centres and cross tees between each tile at 600mm centres all according to manufactures specifications, including hold-down clips, galvanised hangers, etc. 38 359 Ceilings suspended not exceeding 1000mm below steel purlins which are at centres exceeding 1200mm and not exceeding 1400mm. m² 362 38 724 Extra over suspended ceiling with Nuclad ceiling tiles for peripheral margin against surrounding walls, the margin not exceeding 500mm wide, comprising 6.4mm thick plasterboard, skim-plastered, and with shadow-line perimeter detail against wall [see detail on drawing No. AR/BSC-P1-MPC/220 stage T] and "Flush plaster and Lay-in Interface Detail [see drawing No. AR/BSC-P1-MPC/220 stage T], including Xxxx xxxxxxx trims against xxxxx, Xxxx corner-beads and Xxxx SM25 wall- angles at interfaces [First Floor Offices 4, 5, 6]. m 170 39 089 Extra over ceiling for opening for sprinkler head. No 90 39 454 Extra over ceiling for opening for 600 x 600mm light fitting. No 121 39 820 Extra over ceiling for 600 x 600mm opening for ventilation grille/air conditioning diffuser No 112 FLUSH PLASTERBOARD CEILINGS Gypsum ...
Sample 1
Ceiling Tiles. Landlord shall replace all existing ceiling tiles using a 2'x4' ceiling tile that gives the appearance of a 2'x2' ceiling tile. Ceiling tile replacement shall be done in phases during business hours as directed by Tenant in order for Tenant to arrange for employees to be moved to a swing space while ceiling tiles in each area of the Building are being replaced. Landlord shall use reasonable efforts not to disrupt Tenant's business during ceiling tile replacement;
Sample 1
AutoNDA by SimpleDocs

Related to Ceiling Tiles

  • Ceiling Company and its subcontractors will not affix, attach, or suspend any lighting fixtures, signs, or other fixtures or devices of any kind or nature from the ceiling above any of the Premises without the prior written approval of Authority.

  • Ceilings 13.1 Lambdaboard ceilings, minimum 25mm thick with a width of 1220mm x 1800mm, skimmed with Plascon EZ Joint and EZ Skim system.

  • Walls 12 Developer shall provide rustication patterns on all walls, except drainage headwalls, in Aesthetic 13 Area 3 in accordance with Exhibit L2.24 of the LAADCR. The final designs shall resemble these 14 simulations.

  • FINISHES Buyer(s) understands that the location of telephone, electric, cable TV and other utility outlets, doors, windows, air conditioning components, lighting fixtures, equipment and fixtures are subject to change and Buyer(s) understands that materials such as brick, wood, wood grain, carpeting, paint, cabinets, cultured marble, tile, Formica, granite and the like are subject to shading and gradation and may vary from samples, models or color charts, and from piece to piece, and Contractor shall not be liable for such variations.

  • GLASS The Tenant shall maintain the glass part of the demised premises, promptly replacing any breakage and fully saving the Landlord harmless from any loss, cost or damage resulting from such breakage or the replacement thereof.

  • Bicycles Bicycles or other vehicles shall not be permitted anywhere inside or on the sidewalks outside of the Building, except in those areas designated by Landlord for bicycle parking.

  • Trees 1) Any major tree surgery or tree removal over a three (3) inch diameter, which becomes necessary through no fault of the Contractor, will be at the County's expense.

  • Interior (a) Ceilings, sidewalls and bulkhead panels shall be clean and free of cracks and stains;

  • Dimensions Education: Bachelor’s or Master’s Degree in Computer Science, Information Systems, or other related field. Or equivalent work experience. Experience: A minimum of 10 years of IT (including Web/Internet, database applications and data warehousing) and business/industry work experience, with at least 3 years of leadership experience in managing multiple, large, cross-functional teams or project, and influencing senior level management and key stakeholders.

  • Insulation In exterior walls? Yes No Unknown In ceiling/attic? Yes No Unknown In any other areas? Yes No Where? Comments:

Time is Money Join Law Insider Premium to draft better contracts faster.