Common use of Automated Continuous Application Clause in Contracts

Automated Continuous Application. Automated Application Machine: Machine mixing and application of Binder, machine application of aggregate, no hand squeegee work allowed. Perform automated application using equipment that continuously and thoroughly mixes, meters, monitors, and applies the Binder followed by application of the aggregate by use of equipment capable of placing Binder and aggregate in one continuous pass at a minimum of 12 foot in width. If recommended by the Binder manufacturer, use a heated metering pump. Blend and mix the Binder in accordance with the manufacturer’s specification (± 2% by volume) and place a uniform Binder thickness of 60 ± 5 mils (2.7-3.6 square yards per gallon) . Flow meter readings shall be recorded and supplied to the Engineer. Apply the aggregate mechanically at a rate of 12- 15 pounds per square yard (achieving saturation) by vertical drop onto the wet, uncured Binder with a maximum height of 24 inches to ensure there is no displacement of the Binder. Do not allow loose aggregate onto any part of the adjacent, active travel lanes. Use equipment capable of continuously monitoring Binder and aggregate application rates. Record the initial and ending readings of the tanks (binder and aggregate) at the start and end of each continuous section. No walking or standing on the Binder is permitted.