Common use of FINAL PROVISIONS Clause in Contracts

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for at least 8 components From 300kg/h Max. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with a microprocessor control and at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for Complete with at least 8 components From 300kg/h Max. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender 12 wireless stations Mandatory The communication station must be equipped with a microprocessor control and have at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing 4 different communication channels Mandatory Communication station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers security class At least 2units Capacity from 15 l From Ø40 Material receivers At IP65 Complete with headset-type headphones Mandatory Comes with two standalone-type active antennas, each of which supports at least 10 wireless stations Mandatory Complete with at least 1 slave-type antenna Mandatory Comes with at least 2 Capacity with at least 5 charging channel stations Mandatory The system shall operate in the 1,9G Hz frequency band Mandatory Equipment is new (unused) Yes Guarantee Not less than 12 months from 10 l From Ø40the date of signing the transfer- acceptance act Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 06/10/2022. Terms and Conditions of the Tender; Annexes to the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: Dobby weaving looms In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules Basic looms 220-225 width Monitoring and display Integrated microprocessor with touchscreen Language English, Russian,Lithuanian Rapiers Free flight with carriers Cleaning of the shed With insertion blowing device Filling detection Electronic 8 components as followchannels with anti-2 protection, prewinder switch off system Color selection 8 presenters quickstep- monitored by microprocessor Cloth roll Not less than 3 pcs Reed Not less than 3 pcs Warp beam Not less than 4 pcs Warp beam diameter Not more than 805 mm Harness drive Not less than 50 Warp tension Electronical Warp stop motion Electrical, 6 electrodes Take up motion Electronic take-up with programmable variable pick density system Selvedges Electronic independent selvedge devices LHS and RHS and mechanical clamp Tucked selvedge Machine speed 500-550 ppm Heddles Not less than 10000 Drop wires Not less than 5000 Selvedges bobbins Not less than 22 Inspection LED illumination above the reed Weft supply 8 prewinder heads Extraction of all weft knots Not less than 8 pcs. Dobby type Dobby equipped for 20 harnesses Equipment maintenance kit 1 set The machine meets CE requirements Mandatory Equipment is new and unused Mandatory Additional selvedges Equipped with 2 center tucking-in device(s). 2 independent center selvedge motion Bobbinracks for selvedges Leno bobbins Training Included training course for 3 people Installation Mandatory Transportation Mandatory Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: 2 componentsTendering Process Notice, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Maxpublished on the website xxx.xxxxxxxxxxxxxx.xx on 08/08/2022. productivity for at least 8 components From 300kg/h MaxTerms and Conditions of the Tender; Annexes to the Procurement Documents. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with a microprocessor control and at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for at least 8 components From 300kg/h Max. nominal output 1 Maximum height of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with a microprocessor control and at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 the spacer unit From 55x55 3200 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø403500 mm

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 2 componentsPower Not less than 400A At least 72 pcs. 16A output, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for at least 8 components From 300kg/h Max12 psc. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with a microprocessor control and at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø4019 pin multiconectors “socapex” type Mandatory

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 1 Size of manufactured free-form surfaces Not less than 300 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for at least 8 components From 300kg/h Max. nominal output Size of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with a microprocessor control and at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading manufactured spheres Not less than 120 3 Size of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40manufactures aspheres Not less than 300

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Suitable materials LDPE - LLDPE - HDPE One-sided winder Yes Width of the winder roll Not less than 1200 mm Max. productivity for at least 8 components From 300kg/h film width Not less than 1100 mm Diameter of the winding roller Not less than 400 mm Max. nominal output of gravimetric blender From 600kgspeed Not less than 150 m/h min Max. mixer capacity From 16 l Gravimetric blender reel diameter Not less than 800 mm Diameter of aluminum roller Not less than 100 mm Tension control by loadcell Yes Automatic reel unloading Yes Automatic reel changing Yes Leveling "banana" roller Yes Expanding shaft 3” At least 3 pcs 1 Equipment must be equipped with a microprocessor control and at least an 10" touch screen panel new (unused) Yes Possibility 2 The model of the proposed equipment was introduced to store recepies the market no earlier than 2017 Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40please specify

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: Dobby weaving looms In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules Basic looms 220-225 width Monitoring and display Integrated microprocessor with touchscreen Language English, Russian Rapiers Free flight with carriers Cleaning of the shed With insertion blowing device Filling detection Electronic 8-10 channels with anti-2 protection, prewinder switch off system and mechanical weft cutter Color selection 8 components as follow: presenters quickstep- monitored by microprocessor Cloth roll Not less than 2 componentspcs Reed Not less than 3 pcs Warp beam Not less than 2 pcs Warp beam diameter Not more than 805 mm Harness drive Not less than 20 Warp tension Electronical Warp stop motion Electrical, virgin granules 20÷100%6 electrodes Take up motion Electronic take-up with programmable variable pick density system Selvedges Electronic independent selvedge devices LHS and RHS and mechanical clamp Tucked selvedge Machine drive 500-550 ppm Heddles Not less than 7500 Drop wires Not less than 5000 Selvedges bobbins Not less than 22 Inspection LED illumination above the reed Weft supply 8 prewinder heads Dobby type Dobby with 20 harnesses, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for at least 8 components From 300kg/h Max. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with 20 hooks Equipment maintenance kit 1 set The machine meets CE requirements Mandatory Equipment is new and unused Mandatory Additional harness drive Not less than 30 Additional selvedges Equipped with 2 center tucking-in device(s). 2 independent center selvedge motion Bobbinracks for selvedges Leno bobbins Additional design program Programme that allows to transfer a design directly to the loom Training Included training course for 3 people Installation Mandatory Transportation Mandatory Jacquard looms 220-225 width Monitoring and display Integrated microprocessor control with touchscreen Language English, Russian Rapiers Free flight with carriers Cleaning of the shed With insertion blowing device Filling detection Electronic 8-10 channels with anti-2 protection, prewinder switch off system and at least an 10" touch screen panel Yes Possibility mechanical weft cutter Color selection 8 presenters quickstep- monitored by microprocessor Cloth roll Not less than 2 pcs Reed Not less than 3 pcs Warp beam Not less than 2 pcs Warp beam diameter Not more than 805 mm Number of hooks 2680-2750 Warp tension Electronical Warp stop motion Electrical, 6 electrodes Take up motion Electronic take-up with programmable variable pick density system Selvedges Electronic independent selvedge devices LHS and RHS and mechanical clamp Machine drive 500-550 ppm Selvedges bobbins Not less than 22 Inspection LED illumination above the reed Weft supply 8 prewinder heads Harness set Super structure-frame for Jacquard machines top of the weaving loom Additional selvedges Equipped with 2 center tucking-in device(s). 2 independent center selvedge motion Training Included training course for 3 people Installation Mandatory Transportation Mandatory Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 05/11/2021. Terms and Conditions of the Tender; Annexes to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: Dobby weaving looms In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules Basic looms 220-225 width Monitoring and display Integrated microprocessor with touchscreen Language English, Russian Rapiers Free flight with carriers Cleaning of the shed With insertion blowing device Filling detection Electronic 8-10 channels with anti-2 protection, prewinder switch off system and mechanical weft cutter Color selection 8 components as follow: presenters quickstep- monitored by microprocessor Cloth roll Not less than 2 componentspcs Reed Not less than 3 pcs Warp beam Not less than 2 pcs Warp beam diameter Not more than 805 mm Harness drive Not less than 20 Warp tension Electronical Warp stop motion Electrical, virgin granules 20÷100%6 electrodes Take up motion Electronic take-up with programmable variable pick density system Selvedges Electronic independent selvedge devices LHS and RHS and mechanical clamp Tucked selvedge Machine drive 500-550 ppm Heddles Not less than 7500 Drop wires Not less than 5000 Selvedges bobbins Not less than 22 Inspection LED illumination above the reed Weft supply 8 prewinder heads Dobby type Dobby with 20 harnesses, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for at least 8 components From 300kg/h Max. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with 20 hooks Equipment maintenance kit 1 set The machine meets CE requirements Mandatory Equipment is new and unused Mandatory Additional harness drive Not less than 30 Additional selvedges Equipped with 2 center tucking-in device(s). 2 independent center selvedge motion Bobbinracks for selvedges Leno bobbins Additional design program Programme that allows to transfer a microprocessor control design directly to the loom Training Included training course for 3 people Installation Mandatory Transportation Mandatory Supplier’s name Supplier’s address Responsible person’s Name and at least an 10" touch screen panel Yes Possibility Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 13/12/2021. Terms and Conditions of the Tender; Annexes to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw Equipment capacity for products with up to 15 per cent fat Not less than 5 t per hour Equipment capacity for products with 26-80 per cent fat Not less than 3,5 t per hour Automated feed of raw materials to the mixer Yes Software controlled equipment Yes Made of stainless steel or similar material Plastic granules 8 components as followYes Pneumatically operated Big Bag Massage Discharger Activator Yes Big Bag spout docking clamp Yes Pneumatic outlet Valve for Dust Extraction and refill to Weighopper Yes Big Bag Outlet Spout Closing device • For closing partly emptied Big Bags • Closing on the flow principle Yes Flexible BFM Connector to Weighvessel Yes Weigh & Receiver vessel underneath Big Bag Yes Weigh & Receiver Discharger Vibratory bottom diameter Not less than 700 mm Vibratory tray feeders Yes Quick Cleaning Execution Yes Pneumatic Conveying Pick Up Shoe Yes Vessel Weighing system Yes Big Bag spout docking clamp • Manual clamp lid • Dust closed clamping • Dust extraction nozzle Yes Weigh & Receiver vessel underneath Big Bag/Sack Tip Gross content: not less than 2000 ltr / 1500 Kg Diameter vessel: not less than 1600 mm Pneumatic outlet Valves for Dust Extraction and refill to Weighopper Yes Weigh & Receiver Discharger Vibratory bottom Yes Vessel Weighing system Yes Pneumatic Conveying Pick Up Shoe Yes Not less than 2 components, virgin granules 20÷100pcs in the set Yes Vacuum Receiver Filter Diameter: not less than 1800 mm Filter area: not less than 10 m2. Vacuum Blower Yes Double acting pneumatic drive Yes Positioner switches Yes Set of Pneumatic Conveying Piping Yes Not less than 2 pcs in the set Yes For connecting 2 vacuum conveying lines running at the same time Including inlet filters with press difference switch Including 2 adaptors to conveying lines Including drye air piping to convey line inlets Yes Drye air capacity Not less than 800 m3/Hr per de-humidifier Permanent Magnet Yes Horizontal Sifter Yes Metal Separator Yes Mixing quality with an extremely low relative Standard Deviation From 2 to 5 %, bulk . Suitable for mixing micro ingredients without pre-blends Yes v For Fat contents up to 80% Yes Bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 From 0,45 to 0,55 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 Capacity 5000 – 6.000 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for at least 8 components From 300kg/h Max. nominal output Degree of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender Protection Not less than IP 55 Semi-automatic weighing and packing line Yes Equipment must be equipped new (not used) Yes The model of the proposed equipment was introduced to the market not earlier than in the year of 2017 Yes Warranty No less than 12 months from signing the acceptance protocol Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with a microprocessor control all Procurement Terms and at least an 10" touch screen panel Yes Possibility Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 13/04/2021. Terms and Conditions of the Tender; Annexes to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for Diode matrix At least 19 LEDs LED rated power Not less than 40W RGBL color mixing Mandatory Luminous flux Not less than 11000 lm Zoom range (“zoom”) Within the range of at least 8 components From 300kg4-59 degrees PAN/h Max. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped TILT range PAN not less 540 degrees, TILT not less 240 degrees Each set comes complete with a microprocessor control and transport box Mandatory Consisting of at least an 10" touch screen panel Yes Possibility 200 pcs. RGB LED Mandatory Consisting of no less than 100 pcs. White LED Mandatory RGBW color mixing Mandatory Has the ability to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,control led segments when accessing Mandatory Complete with magnetic diffusion filter Mandatory Each set comes complete with min 20 litres hopper a transport box Mandatory Equipment is new (unused) Yes Guarantee Not less than 12 months from the date of signing the transfer-acceptance act Supplier’s name Supplier’s address Responsible person’s Name and min Ø 280mm flange Metering screw From 2 unitsSurname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 12/10/2022. Terms and Conditions of plastic granules the Tender; Annexes to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity Moving spotlights - 20 units Luminous flux Not less than 16000 lm Zoom range Not less than 2° to 42° range „Iris“ function Yes CMY colour blending Yes CRI Not less than 80 (with or without high CRI filter) Supplied with transport box Yes Luminous flux Not less than 21000 lm Beam field angle In range from 18° to 20° RGBW colour mixing Yes Rating for at least 8 components From 300kg/h Max. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender outdoor use IP65 Yes 45° ir 100° magnetic filter frames Yes Supplied with transport box Yes Luminous flux Not less than 2390 lm Beam field angle In range from 30° to 35° Not xxxxxxx then RGBWA colour mixing Yes Nominal LED Power not less then 10W Yes Rating for outdoor use IP65 Yes Luminous flux Not less than 40000 lm Beam field angle In range from 115° to 120° RGBW colour mixing Yes Rating for outdoor use IP65 Yes CRI index Not less than 85 Supplied with transport box Yes Equipment must be equipped new (not used) Yes Warranty No less than 12 months from signing the acceptance protocol Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with a microprocessor control all Procurement Terms and at least an 10" touch screen panel Yes Possibility Conditions, stipulated in: Tendering Process Notice, published on the website xxx.xxxxxxxxxxxxxx.xx on 29/09/2022. Terms and Conditions of the Tender; Annexes to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40the Procurement Documents. We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). Procurement object: a set of direct control electric chain hoists In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as followLoad capacity 500 kg Security class D8+ Chain Not less than 24 m Lifting speed 4m/min Weight without chain Not more than 25 kg Electricity consumption Not more than 400W Class of protection against fine particles and water Not lower than IP65 Complete with transport box Mandatory Load capacity 1000 kg Security class D8+ Chain Not less than 24 m Lifting speed 4m/min Weight without chain Not more than 37 kg Electricity consumption Not more than 1200W Class of protection against fine particles and water Not lower than IP65 Complete with transport box Mandatory Equipment is new (unused) Yes Guarantee Not less than 12 months from the date of signing the transfer-acceptance act Supplier’s name Supplier’s address Responsible person’s Name and Surname Phone number Fax number E-mail address We hereby point out that we agree with all Procurement Terms and Conditions, stipulated in: 2 componentsTendering Process Notice, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Maxpublished on the website xxx.xxxxxxxxxxxxxx.xx on 22/06/2023. productivity for at least 8 components From 300kg/h MaxTerms and Conditions of the Tender; Annexes to the Procurement Documents. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with a microprocessor control and at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40We offer the following Goods:

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kgSuitable Material LDPE - LLDPE - HDPE 3 layer extrusion Yes Maximum layflat width From 2500 mm Maximal film thickness Not less than 145 micron Max. line speed Not less than 15 m/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 min Max. output Not less than 180 kg/dm3 h LDPE Number of screws Min 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kgScrew diameter From 90 mm Screw length From 1950 mm Main motor Not less than 45 kW L/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kgD ratio From 32/1 The auger is covered with a special low-wear alloy Yes Number of screws Min 1 Screw diameter From 75 mm Screw length From 1950 mm Main motor Not less than 22 kW L/dm3 Max. productivity D ratio From 32/1 The auger is covered with a special low-wear alloy Yes Replacing the operation with a lever Yes Film width adjustment Yes Chromium plating Yes Automatic wrapper with PLC controlled cutting Yes Roll diameter Not less than 1000 mm PLC and touchscreen panel Yes System for at the processing and return of scraps to production At least 8 components From 300kg/h Max. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender 1 pc Device for trimming and trimming knives controlled by air cylinders Yes Lose in weight automatic dosing system At least 3 pcs Lamination section Yes Air-cooled process water refrigeration unit Yes 1 Equipment must be equipped with a microprocessor control and at least an 10" touch screen panel new (unused) Yes Possibility 2 The model of the proposed equipment was introduced to store recepies the market not earlier than in the year of 2017 Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40please specify

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 MaxNo. productivity for at least 8 components From 300kg/h Max. nominal output Requirement Value of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with a microprocessor control and at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From parameter 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading Size of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40the chuck upper surface (length x width) Not less than 500 x 200 mm

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 2 components, virgin granules 20÷100%, bulk Suitable materials LDPE - LLDPE - HDPE Material density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 Not less than 0,5 kg/dm3 Pellet size Not less than 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 mm Air system distance horizontal Not less than 6 m Air system distance vertical Not less than 4 m Max. output Not less than 450 kg/dm3 h LDPE Number of components Min 4 Dosage limits for component 1 From 10 to 70% Dosage limits for component 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity From 10 to 50% Dosage limits for at least 8 components From 300kg/h Max. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with a microprocessor control and at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate component 3 From 1 unit to 10% Dosage limits for component 4 From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete 0.5 to 2% The ability to work with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm recycled materials Yes Capacity of the weighing vessel At least 5 kg Dynamic mixing Yes PLC management Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers device Yes Blower of vacuum unit, Fan power From 3 Not less than 5 kW Material receivers At least 2units Vacuum level Not less than 42 kPa Automatically clean the filter Yes Capacity from 15 not less than 30 l From Ø40 Material receivers At least 2 pcs Capacity from 10 not less than 50 l From Ø40At least 2 pcs 1 Equipment must be new (unused) So 2 The model of the proposed equipment was introduced to the market no earlier than 2017 Yes, please specify

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as follow: 1 Size of manufactured free-form surfaces Not less than 300 2 components, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 kg/dm3 2 components, additive granules 2÷5%, bulk density 0,6÷0,7 kg/dm3 2 components, additive granules 0,5÷2%, bulk density 0,6÷0,7kg/dm3 Max. productivity for at least 8 components From 300kg/h Max. nominal output Size of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender must be equipped with a microprocessor control and at least an 10" touch screen panel Yes Possibility to store recepies Yes, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading manufactured spheres Not less than 200 3 Size of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40manufactures aspheres Not less than 300

FINAL PROVISIONS. The costs of Tender preparation and participation in the Tendering Process shall not be compensated to the Suppliers. The Buyer at any time prior to conclusion of the Procurement Contract, shall be entitled to terminate Procurement procedures, if some circumstances have appeared, which could not be anticipated. The Buyer, after adopting decision concerning termination of Procurement procedures, no later than within 3 business days from decision adoption, shall inform all suppliers, who have submitted their Tenders, on such a decision, and, if the Procurement procedures have been terminated prior to the deadline for Tender submission shall inform all suppliers who have acquired the Procurement Terms and Conditions and / or Procurement Documents. The Buyer, no later than within 3 business days after Procurement Contract conclusion, shall inform via e-mail all Suppliers, who have submitted their Tenders, about conclusion of the Procurement Contract, indicating the successful Supplier awarded the Contract, as well as on the price offered by this Supplier. Information, submitted in the Tenders, except for information indicated in item 11.3 of the Tendering Terms and Conditions shall not be disclosed to Suppliers and third persons, who administer and audit use of the EU Funds. Technical Specification (Annex No 1); Tender Form (Annex No. 2); Declaration of Compliance with Minimum Qualification Requirements (Annex No. 3); Supplier’s Declaration (Annex No. 4). In the case when the description of the Object of Procurement in the Technical Specification, refers to a certain model or a source, a particular process or a trademark, patent, types, particular origin or production, it should be considered that equivalent objects in terms of their properties will be acceptable as well. Raw material Plastic granules 8 components as followPurpose: for coextrusion of wood-plastic composite (WPC) profiles Yes Type: 2 componentsscrews, virgin granules 20÷100%, bulk density 0,5÷0,6kg/dm3 2 components, virgin granules 10÷50%, bulk density 0,5÷0,6 conical Max. capacity: From 30 to 40 kg/dm3 2 componentsh Maximum power installed till 40 kW Power supply: 3-f, additive granules 2÷5%380V, bulk density 0,6÷0,7 50Hz Features: the surface of the main working pair is coated with molybdenum or tungsten carbide. Possibility to mount above the main extruder, or from the side. Equipment must be compatible with the main coextrusion equipment of buyer. All documentation will be provided by the request of the Supplier. Supplier must follow all requirements of 5 part of these Terms and Conditions. Yes Purpose: for forming a profile from WPC. Product drawing on request Yes Type: coextruded, with surface embossing device Yes Profile weight: < 3.0 kg/dm3 2 componentsm Extrusion speed: 0,5-1,0 m/min Purpose: for forming a profile from WPC. Product drawing on request Yes Type: coextruded, additive granules 0,5÷2%, bulk density 0,6÷0,7kgwith surface embossing device Yes Profile weight: < 3.0 kg/dm3 Max. productivity for at least 8 components From 300kgm Extrusion speed: 0,5-1,0 m/h Max. nominal output of gravimetric blender From 600kg/h Max. mixer capacity From 16 l Gravimetric blender min 1 Equipment must be equipped with a microprocessor control and at least an 10" touch screen panel new (not used) Yes Possibility 2 The model of the proposed equipment was introduced to store recepies Yesthe market not earlier than in the year of 2017 Please, from 90 recepies Mixer 230V/1/50Hz Standard slide gate From 1 unit From 55x55 mm From 45 litres hopper From Ø 280mm flange Standard slide gate From 2 units, From 55x55 mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 40 litres hopper From Ø 280mm flange Standard slide gate From 1 unit, From 25x25mm From 45 litres hopper From Ø 280mm flange External screw dosing station 2 units ,complete with min 20 litres hopper and min Ø 280mm flange Metering screw From 2 units, From Ø 25mm Acoustic alarm Yes Vacuum unit with automatic loading of plastic granules to be combined with one or more material receivers Yes Blower of vacuum unit, power From 3 kW Material receivers At least 2units Capacity from 15 l From Ø40 Material receivers At least 2 Capacity from 10 l From Ø40specify