Wipe sample definition

Wipe sample means a sample collected by wiping a representative surface of known area, as determined by ASTM test method E1728, “Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques, or equivalent method, with an acceptable wipe material as defined in ASTM test method E1792, “Standard Specification for Wipe Sampling Materials for Lead in Surface Dust.”

Wipe sample means a piece of material used to wipe over the area of a surface or device to collect radioactive contami- nation.

Wipe sample means a sample collected by wiping a representative surface of known area, as determined by ASTM E1728, “Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques,” or equivalent method, with an acceptable wipe material as defined in ASTM E1792, “Standard Specification for Wipe Sampling Materials for Lead in Surface Dust.” The minimum area for a floor wipe sample shall be 0.50 square feet or 72 square inches. The minimum area for a windowsill wipe sample and for a window trough wipe sample shall be 0.25 square feet or 36 square inches.

Examples of Wipe sample in a sentence

• Storage and transport requirements Wipe sample set: ▪ Dark (protect from direct UV- and sunlight) ▪ Store in a cool (+5 to +40°C) and dry place.

• Wipe sample collection Wipe samples are not appropriate for this method.

• Wipe sample results tended to be less than or equivalent to those from the CAPS vacuum sampler.

• Wipe sample results which are in excess of the construction dust control standard of eight hundred micrograms per square foot (>800 µg/SF) for adjoining construction zones on two (2) consecutive samplings (or two (2) consecutive days) or forty 40 micrograms per square foot (>40 µg/SF) for adjoining occupied (floor) areas on any occasion will require isolation and clean-up of the affected areas.

• Wipe sample bottles clean of any outside d e- bris and label properly.

More Definitions of Wipe sample

Wipe sample means a sample collected by wiping a representative surface of known area, as determined by ASTM E1728, "Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques," or equivalent method, with an acceptable wipe material as defined in ASTM E 1792, "Standard Specification for Wipe Sampling Materials for Lead in Surface Dust." ASTM stan- dards can be obtained from ASTM International, P.O. Box C700, West Conshohocken, PA 19428-2929, via phone at 610-832-9525, or electronically at www.astm.org

Wipe sample means a sample collected by an appropriately accred-

Wipe sample means a sample collected by wiping a

Wipe sample means a sample collected by wiping a representative surface of known area,

Wipe sample means a sample collected by wiping a representative

Wipe sample means a surface sample collected by wiping a sample media on the surface being sampled in accordance with Section 6 of this Part 1.

Wipe sample means a surface sample collected by wiping a sample medium on surface materials in accordance with common industry standards the field equipment and sampling guidance in National Institute for Occupational Health and Safety, Manual of Analytical Methods, 4th Ed., Method 9100, Lead in Surface Wipe Samples (Issue 2, May 1996).