Weep holes definition

Weep holes means a series of small diameter holes located in the wall of the supply pipe for a yard hydrant that allow for drainage of accumulated water from the delivery piping. These holes are usually part of a plunger and valve system that seals off the holes during water usage and opens the holes during shutdown. These openings are located below ground level and below the frost line in areas where the threat of freezing exists.
View Source
Weep holes means a series of small diameter holes located in the wall of the supply pipe for a yard hydrant that allow for drainage of
View Source
Weep holes. Relating to concrete slab properties and also multi-level properties of brick construction. All of the weep holes are to be left completely exposed, unobstructed and clean at all times. They must be BCA code and Australian Standard compliant in relation to the time as to when the building was first built.
View Source

Examples of Weep holes in a sentence

  • Weep holes of sizes 150 mm x 150 mm are to be left in the body of masonry walls if shown on the drawings.

  • Weep holes shall be provided through all structures as indicated on the plans and as directed.

  • Weep holes are openings at the foundation level of a brick wall that allow moisture to escape from behind the wall.

  • Weep holes shall be provided in steam and gas flow installations where there is possible condensation or in liquid flow where there is possible gas entrainment.

  • Weep holes of at least ¾ in shall be provided through transverse structural members to allow each compartment to drain completely.

  • Weep holes shall be provided on the case bottom of all gauges located in humid areas unless the case already has sufficient ventilation.

  • Weep holes are provided to allow excess water to escape to the outside.

  • Weep holes to be provided in the retaining walls in solid fill portion shall be min 75mm dia with spacing of 100 cm c/c in either direction.


More Definitions of Weep holes

Weep holes means a series of small diame- ter holes located in the wall of the supply pipe
View Source