Weed control definition

Weed control means the prevention, destruction, or removal of any plant from where it is not wanted by the use of herbicides.
Sample 1Sample 2Sample 3
Weed control. All weeds shall be removed from all deck areas either manually or with an approved upon weed killer provided by the client.
Sample 1
Weed control. Lessee shall control all noxious weeds on all lands under this lease consistent with applicable laws. Lessee shall be responsible for, and shall reimburse State for, any noxious weed control costs incurred as a result of Lessee’s failure to control. The Lessee shall use Integrated Pest Management (IPM) to control weeds. This means using a coordinated decision-making and action process that considers all weed management methods and strategies, and applies them in an environmentally and economically sound manner to meet weed management objectives. The elements of integrated pest management for weeds include:
Sample 1

Examples of Weed control in a sentence

  • Weed control shall be required on the disturbed land where noxious weeds exist, which includes the roads, pads, associated pipeline corridor, and adjacent land affected by the establishment of weeds due to this action.

  • Working Xxxxxxx 1 Open right-of-way mowing Equipment Operator 5* Mowing open right-of-way Workers 4* Mowing urban setting right-of-way Spray Technician 1 Weed control Equipment Operator 2 Mowing Slopes/Ditches/Wet areas (Boom Mowers) * Quantities have to be adjusted according to the amount of equipment to be used in the specific area.

  • The Settlement was only reached after the conclusion of lengthy mediation process overseen by Mediator Werman, who is one of the most experienced wage and hour litigators in the nation, during which time the parties’ positions were discussed and debated extensively.

  • Weed control may be reduced and the risk of crop injury (at all stages of growth) may increase if extreme growing conditions (such as drought or near-freezing temperatures) occur prior to, at, or following application.

  • Weed control may be reduced when applications are made when heavy dew, fog and mist/rain are present or when weeds are under stress due to drought, cool temperatures or extended periods of cloudiness.

  • Weed control of the identified serious threat environmental weeds and all noxious weed species must occur prior to any development and removal/relocation of soils.

  • Weed control must not impact or destroy any remnant native vegetation or landscaping works.

  • Weed control must be at no cost to and to the satisfaction of the responsible authority before any part of the land is transferred to Council for future management/maintenance.

  • Weed control methods handbook: tools and techniques for use in natural areas.

  • In continuing to strengthen the internal audit function, to be fit for purpose, adding value and given Exxaro’s evolving business model, the internal audit approach was refreshed with key features.

Related to Weed control

  • Load Control Equipment means the equipment (which may include, but is not limited to, ripple receivers and relays) that is from time to time installed in, over or on Consumer’s Premises for the purpose of receiving signals sent by Load Signalling Equipment and switching on and off, or otherwise controlling, controllable load;

  • Service Control Point (SCP) is the node in the common channel signaling network that accepts Queries for certain Database services. The SCP is a real time database system that receives Queries from service platforms, performs subscriber or application-specific service logic, and then sends a Response back to the Query-originating platform. Such service platforms can be Service Switching Points (SSPs) or other network nodes capable of properly formatting and launching Queries.

  • Direct Load Control means load reduction that is controlled directly by the Curtailment Service Provider’s market operations center or its agent, in response to PJM instructions.

  • Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.

  • control zone shall have the meaning given in the Operating Agreement.

  • Billing Commencement Date means the earlier of:

  • Event Outside Our Control means any act or event beyond WRAS’s reasonable control, including without limitation strikes, lock-outs or other industrial action by third parties, civil commotion, riot, invasion, terrorist attack or threat of terrorist attack, war (whether declared or not) or threat or preparation for war, fire, explosion, storm, flood, earthquake, subsidence, epidemic or other natural disaster, or failure of public or private telecommunications networks [or impossibility of the use of railways, shipping, aircraft, motor transport or other means of public or private transport;

  • Control Appraisal Period shall exist with respect to the Mortgage Loan, if and for so long as:

  • effective control means a relationship constituted by rights, contracts or any other means which, either separately or jointly and having regard to the considerations of fact or law involved, confer the possibility of directly or indirectly exercising a decisive influence on an undertaking, in particular by:

  • Access control means a system for allowing only approved individuals to have unescorted access to the security zone and for ensuring that all other individuals are subject to escorted access.

  • Protection Period means the period commencing on the Change in Control Date and ending on the second anniversary thereof.

  • Control means the possession, directly or indirectly, of the power to direct or cause the direction of the management or policies of a Person, whether through the ability to exercise voting power, by contract or otherwise. “Controlling” and “Controlled” have meanings correlative thereto.

  • Contract Transition Period means the 90 day transition as defined in Section F of this Contract.

  • Issuer Call Commencement Date means the date specified as such in the definition of the relevant Series in the applicable Final Terms;

  • CIC Protection Period means the two-year period beginning on the date of a Change in Control and ending on the day before the second annual anniversary of the date of the Change in Control.

  • Local Interconnection Trunks/Trunk Groups means the trunks that are used for the termination of Local Exchange Traffic, pursuant to iconectiv Technical Reference GR 317-CORE.

  • Acquisition Period means any period commencing on the date that a Material Acquisition is consummated through and including the last day of the second full fiscal quarter following the date on which such acquisition is consummated; provided that there shall be at least one full fiscal quarter between any two Acquisition Periods.

  • fall prevention equipment means equipment used to prevent persons from falling from a fall risk position, inducing personal equipment, a body harness, lanyards, lifelines or physical equipment such as guard-rails, screens, barricades, anchorages or similar equipment;

  • Control equipment means equipment necessary for the setting and/or unsetting of an immobilizer.

  • Exit Management Date means each of the following:

  • Inspection Period means the period beginning on the Effective Date and expiring at 5:00 p.m. eastern time on the forty-fifth day after the Effective Date.

  • Change in Control Protection Period means the period beginning one month prior to and ending twelve (12) months immediately following the consummation of a Change in Control.

  • Construction Period means the period commencing from the Appointed Date and ending on the date of the Completion Certificate;

  • Local Interconnection Trunks/Trunk Groups means the trunks that are used for the termination of Local Exchange Traffic, pursuant to iconectiv Technical Reference GR 317-CORE.

  • Services Commencement Date means the date delivery of the Services shall commence as specified in the Key Provisions. If no date is specified in the Key Provisions this date shall be the Commencement Date;

  • CONTRACT END DATE Contract performance shall terminate as of December 31, 2027, with no new obligations being incurred after this date unless the Contract is properly amended, provided that the terms of this Contract and performance expectations and obligations shall survive its termination for the purpose of resolving any claim or dispute, for completing any negotiated terms and warranties, to allow any close out or transition performance, reporting, invoicing or final payments, or during any lapse between amendments. CERTIFICATIONS: Notwithstanding verbal or other representations by the parties, the “Effective Date” of this Contract or Amendment shall be the latest date that this Contract or Amendment has been executed by an authorized signatory of the Contractor, the Department, or a later Contract or Amendment Start Date specified above, subject to any required approvals. The Contractor certifies that they have accessed and reviewed all documents incorporated by reference as electronically published and the Contractor makes all certifications required under the Standard Contract Form Instructions and Contractor Certifications under the pains and penalties of perjury, and further agrees to provide any required documentation upon request to support compliance, and agrees that all terms governing performance of this Contract and doing business in Massachusetts are attached or incorporated by reference herein according to the following hierarchy of document precedence, the applicable Commonwealth Terms and Conditions, this Standard Contract Form, the Standard Contract Form Instructions and Contractor Certifications, the Request for Response (RFR) or other solicitation, the Contractor’s Response (excluding any language stricken by a Department as unacceptable, and additional negotiated terms, provided that additional negotiated terms will take precedence over the relevant terms in the RFR and the Contractor’s Response only if made using the process outlined in 801 CMR 21.07, incorporated herein, provided that any amended RFR or Response terms result in best value, lower costs, or a more cost effective Contract.