Valve Assembly definition

Valve Assembly. As presented in the installation details.
View Source

Examples of Valve Assembly in a sentence

  • All commercial and residential lawn sprinkler systems installed must be equipped with a minimum of a Double Check Valve Assembly that is tested by a licensed certified tester.

  • Air-Vacuum Relief Valve Assembly: Install where indicated on drawings or nearest high point, not closer than 2-feet from nearest fitting.

  • COVERED: Thermocouple, Standard Thermostat, High Limit Thermostat, Anode Rod, Overload Protector, Flame Sensor, Gas Valve Assembly, Temperature, Regulator, Dip Tube, Drain Valve, Air Diverter, Relay, Flow Sensor, Burners.

  • Project U-5828 UC-6 County: Wake Payment will be made under: 12”x 16” Valve Assembly Each PSP (▇▇▇▇▇▇-▇▇▇▇ and Associates, Inc.) 6” diameter ductile iron, class 350 water main (open trench) is furnished and installed as described in Town of ▇▇▇▇ Standard Specifications, Sections 06010.B and 06010.C. This includes all required testing, disinfection, flushing and sampling as indicated in Town of ▇▇▇▇ Standard Specifications, Section 06060.

  • The following is a partial list of facilities, activities and processes which require the installation of an approved Double Check Valve Assembly (DCVA).

  • Zone Control Valve Assembly: Install at locations shown on the drawings.

  • The type of device will either be a Dual Check (DC) Valve, Dual Check Valve Assembly (DCVA) with test assembly, or a Reduced Pressure Zone Assembly (RPZ) with test assembly and dump port.