Utilized Capacity definition

Utilized Capacity. Has the meaning determined in Section 3.06.
Sample 1Sample 2Sample 3

Examples of Utilized Capacity in a sentence

  • If the Monthly Utilized Capacity is higher than the notified maximum demand (NMD), the Utilized Capacity will be used for a 12-month rolling period.

  • Utilized Capacity During Peak Month is equal to production output as a percentage of Nominal Installed Production Capacity during our peak month for each respective plant.

  • The normalization (equivalency) factors used shall allow the Indian PSU pipeline operators to compare themselves to each other, as well as to other facilities in terms of complexity and scale to see how they rank competitively.The benchmarking study shall provide the details of various normalization factors including Consultant’s normalization divisor used with their significance like Utilized Capacity, Diameter-Length, etc.

  • Therefore, a penalty for sub-optimal operation should be inherently included in the K1 factor, which can be given as follows:J1U$,A&M power 5.4K1 =U$,gridWhere J1 is the capacity utilization factor, which is given as:Installed (Maximum) Capacity [Watts] = Prated 5.5J1 =Utilized Capacity [Watts] Pconsumed powerFrom Eq. 5.4 K1 is the ratio of the realized (weighed) amortization and maintenance costs per Watt of power delivered to the direct cost of electricity (per Watt) drawn from the grid.

  • SERVICE 8 Section 3.01 – Description of the Service: 8 Section 3.02 – Nominations of the Sender 8 Section 3.03 – Delivery and Withdrawal of the Crude Oil 8 Section 3.04 – Custody of the Crude Oil 9 Section 3.05 – Sender’s Contracted Capacity 10 Section 3.06 – Disposal of the Not - Utilized Capacity 10 Section 3.07 – Quality Specifications’ Adjustments 10 CLAUSE 4.

  • OR Allotted and running successfully 2 (two) projects of Remediation/Bio-Mining of a MSW dumpsite in India or in abroad each having 50% (fifty percent) capacity of the Estimated Utilized Capacity, during the last 5 (five) years preceding the Bid Due Date.

  • Four metrics are used: On-Time Performance (OTP), Utilized Capacity, Average Speed, and the level of state support.

  • It is lo- cated in Southern Province and owned by the Swarp Table 6.1. Lonrho Ginneries: Installed and Utilized Capacity in 1994-95 GINNERY CAPACITY % USEDMumbwa 20,000 MT85%Lusaka 14,000 MT50%Lusaka A 12,000 MT58%Gwembe 20,000 MT0%Source: Cargill Technical Services (1996) Spinning.

  • Table 4: Rankings of the Pennsylvanian, 2012 Sources: Amtrak and Puentes The Pennsylvanian ranks fifth in OTP, the number one driver of customer satisfaction of Amtrak.23 It ranks a highly efficient second in Utilized Capacity, which is the ratio of used seat-miles to available seat- miles.

  • Avoiding NMD penalties In the event the declared Notified Maximum Demand on an intake point is exceeded in any month, the first billing effect is that the Annual Utilized Capacity (AUC) figure is set to the higher recorded value.

Related to Utilized Capacity

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Daily Unforced Capacity Obligation means the capacity obligation of a Load Serving Entity during the Delivery Year, determined in accordance with Reliability Assurance Agreement, Schedule 8, or, as to an FRR entity, in Reliability Assurance Agreement, Schedule 8.1. Day-ahead Congestion Price: “Day-ahead Congestion Price” shall mean the Congestion Price resulting from the Day-ahead Energy Market. Day-ahead Energy Market:

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Final RTO Unforced Capacity Obligation means the capacity obligation for the PJM Region, determined in accordance with RAA, Schedule 8. Financial Close:

  • Nominal Rated Capability means the nominal maximum rated capability in megawatts of a Transmission Interconnection Customer’s Customer Facility or the nominal increase in transmission capability in megawatts of the Transmission System resulting from the interconnection or addition of a Transmission Interconnection Customer’s Customer Facility, as determined in accordance with pertinent Applicable Standards and specified in the Interconnection Service Agreement.

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.