Unique point definition

Unique point means an additional service description, marked adjacent to the normal service description, but which must not be used for calculating a load capacity variation as defined in paragraph 2.35. and in annex 8 to this Regulation.
Sample 1Sample 2Sample 3
Unique point means an additional service description, marked adjacent to the normal service description, but which must not be used for calculating a load capacity variation as defined in paragraph 2.35 and in Annex 8 to this Regulation.
Sample 1Sample 2Sample 3
Unique point means an additional service description, marked adjacent to the normal service description, but which must not be used for calculating a load capacity variation with speed as defined in paragraph 2 and in Annex 8 to this Regulation."Renumber former paragraphs 2.35. to 2.52. into (new) 2.40. to 2.57. Paragraph 3.2.1., amend to read:
Sample 1Sample 2

Examples of Unique point in a sentence

  • Otherwise a role which is not involved in one of the branches may proceed before knowing whether it has to participate on the chosen branch or not.Definition 7 (Unique point of choice).

  • Unique point to point calibration details, including method used and errors established at each point of calibration and, where appropriate, the specified tolerance band (when applicable).

  • Unique point- ers are useful to support object migration between threads.

  • In this optimization problem, we assume the following: (A1) Unique point of minimum and strong convexity of reduced average cost:H ⊆ H − HW ⊂w − wr, ∇C ˆ(w) − ∇C ˆ(wr) ≥ λ ¨w − wr¨2 , ∀w, wr ∈ RdˆAssume that CH has a unique point of minimum w∗ in a compact and convex set Rd. Further, for any ˆ of cardinality at least n f , assume that the average cost of ˆ, i.e. CHˆ = (1/ H ) Σi∈Hˆ Ci, is strongly convex.

  • We would expect this to include the following for each distribution point: • Unique point ID (to enable clear identification when changes are made).• Address, including postcode.• Audience Type.

  • If required, compliance with the particulate emission limitation shall be determined in accordance with the test methods and procedures in 40 CFR Part 60, Appendix A, Methods 1- 5.

  • Exceptional films have some of the following in common… Originality Authentic voice Unique point of view Emotional engagement Extremes It’s important to remember that individual applications are as different as the stories they tell.

  • Unique point of care blood test speeds up clinical decision-making, improves quality of care and reduces costs3.

  • Exceptional films have some of the following in common… Originality Authentic voice Unique point of view Emotional engagement Extremes Individual applications are as different as the stories they tell.

  • A tyre can have more than one load index to indicate its load capacity when used in single or dual (twin) formation, or to indicate an alternative load capacity (Unique point) on which a load variation in accordance with paragraph 2.40.


More Definitions of Unique point

Unique point means an additional service description, marked adjacent to the normal service description, but which must not be used for calculating a load capacity variation with speed as defined in paragraph 2 and in Annex 8 to this Regulation." Renumber former paragraphs 2.35. to 2.52. into (new) 2.40. to 2.57. Paragraph 3.2.1., amend to read:
Sample 1Sample 2

Related to Unique point

  • Service Point the place at which the Services are to be performed.

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Flash point means the lowest temperature of a liquid at which its vapours form a flammable mixture with air;

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Connection Point means an exit point or an entry point or a bidirectional point identified or to be identified as such in an access contract.

  • Meet-Point Billing (MPB means the billing associated with interconnection of facilities between two (2) or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Inter-connection Point means interface point of renewable energy generating facility with the transmission system or distribution system, as the case may be:

  • Service Switching Point (SSP means the telephone Central Office Switch equipped with a Signaling System 7 (SS7) interface.

  • Focal point means the entity of a Party referred to in Article 5 responsible for receiving and submitting information as provided for in Articles 13 and 16;

  • H-point means the pivot centre of the torso and thigh of the H-point machine when installed in a vehicle seat in accordance with Annex 12. Once determined in accordance with the procedure described in Annex 12, the "H" point is considered fixed in relation to the seat-cushion structure and is considered to move with it when the seat is adjusted.

  • Generation Interconnection Customer means an entity that submits an Interconnection Request to interconnect a new generation facility or to increase the capacity of an existing generation facility interconnected with the Transmission System in the PJM Region. Generation Interconnection Request:

  • Grade point average or "GPA" means the grade point average earned by an eligible student and reported by the high school or participating institution in which the student was enrolled based on a scale of 4.0 or its equivalent if the high school or participating institution that the student attends does not use the 4.0 grade scale;

  • Destination Point means the delivery point(s) on Carrier’s System where Product is delivered to Shipper, as such points are specified in Section III of this tariff.

  • Development Location Point means a single point selected by the Applicant on the proposed Development site that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development. For a Development which consists of Scattered Sites, this means a single point on the site with the most units that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development.

  • Model 1 seller means a seller registered under the agreement that has selected a certified service provider as the seller's agent to perform all of the seller's sales and use tax functions for agreement sales and use taxes other than the seller's obligation under Section 59-12-124 to remit a tax on the seller's own purchases.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Meet Point A point, designated by the Parties, at which one Party’s responsibility for service begins and the other Party’s responsibility ends.

  • Network Supply Point or "NSP" means any Point of Connection between:

  • Terminals means, collectively (a) the Initial Terminals; and (b) any other terminals, storage facilities, wharfage, tankage and loading racks owned or leased by any Loan Party that are used in the Business.

  • Model 2 seller means a seller registered under the agreement that:

  • Bandwidth means a distributor’s defined tolerance used to flag data for further scrutiny at the stage in the VEE process where a current reading is compared to a reading from an equivalent historical billing period. For example, a 30 percent bandwidth means a current reading that is either 30 percent lower or 30 percent higher than the measurement from an equivalent historical billing period will be identified by the VEE process as requiring further scrutiny and verification;

  • Customer channel termination point means the location where the customer either inputs or receives the communications.

  • Customer-generator means a user of a net metering system.

  • Distribution center means a building or structure used primarily for the storage of goods which are intended for subsequent shipment to retail outlets. Distribution center does not mean a building or structure used primarily to store raw agricultural products, used primarily by a manufacturer to store goods to be used in the manufacturing process, used primarily for the storage of petroleum products, or used for the retail sale of goods.