Type 1 test definition

Type 1 test means a test used to measure a vehicle's cold start gaseous, particulate matter, particle number, CO2 emissions, fuel consumption, electric energy consumption and electric range at ambient conditions.
Sample 1Sample 2Sample 3
Type 1 test means a test used to measure a vehicle's cold start gaseous, particulate matter, particle number, CO2 emissions, fuel consumption, electric energy consumption and electric range at ambient conditions. means a test used to measure a vehicle's cold start gaseous, particulate matter, particle number, CO2 emissions, fuel consumption, electric energy consumption and electric range at ambient conditions. Covered in 1. of Annex 6 R83 (OBD): means the driving cycle (Parts One and Two) used for emission approvals, as detailed in Tables 1 and 2 of Annex 4a.
Sample 1Sample 2
Type 1 test means a test used to measure a vehicle's cold start gaseous, particulate matter, particle number, CO2 emissions, fuel consumption, electric energy consumption and electric rangegaseous and particulate exhaust emissions, CO2 emissions, fuel consumption, electric energy consumption and electric range at ambient conditions.
Sample 1Sample 2

Examples of Type 1 test in a sentence

  • Conditions are substantially included in the Type 1 test procedures.

  • After vehicle preconditioning according to paragraph 6.2. of this appendix, the test vehicle is driven over a Type 1 test.

  • The following information, if applicable, is the minimum data required for the Type 1 test.

  • The test conditions shall be selected in such a way that they all occur under normal driving as represented by the Type 1 test.

  • The Type 1 test need not be performed for the demonstration of electrical failures (short/open circuit).

  • The planned production volume of the CoP family per a 12 month period shall be monitored by the manufacturer on a monthly basis, and the responsible authority shall be informed if any change in the planned production volume causes changes to either the size of the CoP family or the Type 1 test frequency.

  • The Type 1 test shall be carried out on a minimum of three production vehicles, which shall be valid members of the CoP family as described in paragraph 8.1.3. The test results shall be the values calculated according to Annex B7 TableA7/1 _Step_XX or Annex B8 TableA8/5 _Step_XX.

  • On the other hand, execution-guided systems generate quantifier-free conjunctive formulas, that can be large.

  • For level 1B all vehicles with regard to the WLTP Type 1 test for emissions of gaseous compounds, particulate matter and to emissions of carbon dioxide and fuel efficiency and/or the measurement of electric energy consumption and electric range and to the Type 4 test on evaporative emissions.

  • Option 2: charge-sustainingType 6 test with no subsequent charge-depleting Type 1 test.


More Definitions of Type 1 test

Type 1 test means a test used to measure a vehicle's cold start gaseous and particulate exhaust emissions, CO2 emissions, fuel consumption, electric energy consumption and electric range at ambient conditions;
Sample 1
Type 1 test means the means the applicable driving cycle used for emission approvals, as detailed in this Regulation.
Sample 1
Type 1 test means a test used to measure a vehicle's cold start gaseous, particulate matter, particle number, CO2 emissions, fuel consumption, electric energy consumption and electric range at ambient conditions. Y "Type I Test" means the driving cycle (Parts One and Two) used for emission approvals, as detailed in Tables A4a/1 and A4a/2 of Annex 4a. (R.83 Annex 11)
Sample 1
Type 1 test means a test used to measure a vehicle's cold start
Sample 1Sample 2
Type 1 test means the applicable driving cycle (Parts One and Two) used for emission approvals, as detailed in Tables A4a/1 and A4a/2 of Annex 4a to this Regulation.
Sample 1
Type 1 test means a test used to measure a vehicle's cold start gaseous, particulate matter, particle number, CO2 emissions, fuel
Sample 1

Related to Type 1 test

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Cannabis testing facility means an entity registered by

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • PRINCIPAL TEST The CONTRACTOR rather than COUNTY has the right to control the manner and means of accomplishing the result contracted for.

  • Class C Par Value Test means the test which will be satisfied as of any Measurement Date if, on such Measurement Date, the Class C Par Value Ratio is at least equal to the percentage specified in the definition of "Coverage Test".

  • Quantitative fit test or "QNFT" means an assessment of the adequacy of respirator fit by numerically measuring the amount of leakage into the respirator.

  • Class C Coverage Tests means the Class C Interest Coverage Test and the Class C Par Value Test.

  • Genetic testing means an analysis of genetic markers to exclude or identify a man as the father or a woman as the mother of a child. The term includes an analysis of one or a combination of the following: