Tread depth definition

Tread depth means the depth of the principal grooves.
Sample 1Sample 2Sample 3
Tread depth means the depth of the principal grooves."
Sample 1Sample 2Sample 3
Tread depth means the amount of tread design on the tire. "Tread depth" includes original, retread and recap tread design and, in respect to a special mileage commercial tire, recut, regrooved and siped tread design.[PL 1993, c. 683, Pt. A, §2 (NEW); PL 1993, c. 683, Pt. B, §5 (AFF).]
Sample 1Sample 2Sample 3

Examples of Tread depth in a sentence

  • Tread depth, as manufactured and supplied to Competitors, must be a minimum of 2.5 mm in any void area of the tire.B. All wet tires must, when new, have a maximum contact area of 70% of the total area.

  • The greatest riser height within any flight of stairs shall not382 exceed the smallest by more than 3/8 inch (9.5 mm).383 R311.7.5.2 Tread depth.

  • Tread depth includes both original, retread, and recapped tread design; and in respect to special mileage commercial tire design.

  • Tread depth should not be less than 4/32” on front tires and 2/32” on the rear tires.

  • Where repair of the damaged tyre is not possible - As per scale mentioned below:Unused Tread Depth*Reimbursement % of cost of new tyre(s) and/or tube(s)>=7mm*Unused Tread depth will be measured at the centre of the tread.

  • Tread depth will be a minimum of 34” in the lower deck and 33” in the upper deck.

  • The greatest riser height within any flight of stairs shall not exceed the smallest by more than 3/8 inch (9.5 mm).R311.7.5.2 Tread depth.

  • Damaged to tyre(s) and/or tubes due to external impactThe company will cover reimbursement of repair and/or replacement as per the scale given below: Where repair of the damaged tyre is possibleCost of repairWhere repair of the damaged tyre is not possible Unused Tread Depth*Reimbursement % of cost of new tyre(s) and/or tube(s)>=7mm*Unused Tread depth will be measured at the centre of the tread.

  • Tread depth - record reading Tread depth shall not be less than 4/32 inch on the steering axle and 2/32 on the rear axle measured at three different major tread grooves at the lowest point but not on a wear bar.

  • Tread depth, inflation, and wear should be normal.Rear REAR SUSPENSION• Lights and reflectors.


More Definitions of Tread depth

Tread depth means the horizontal distance from the front to the back of a tread, excluding nosing, if any.
Sample 1Sample 2

Related to Tread depth

  • Lot depth means the horizontal distance between the front and rear lot lines.

  • Horizontal well means a well bore drilled laterally at an angle of at least eighty (80) degrees to the vertical or with a horizontal projection exceeding one hundred (100) feet measured from the initial point of penetration into the productive formation through the terminus of the lateral in the same common source of supply.

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.2.

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • Regional Transmission Expansion Plan means the plan prepared by the Office of the Interconnection pursuant to Operating Agreement, Schedule 6 for the enhancement and expansion of the Transmission System in order to meet the demands for firm transmission service in the PJM Region. Reliability Assurance Agreement or PJM Reliability Assurance Agreement:

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Development Well means a well drilled inside the established limits of an oil or gas reservoir, or in close proximity to the edge of the reservoir, to the depth of a stratigraphic horizon known to be productive.

  • Public safety answering point (PSAP) means a 24-hour, state, local, or contracted communications facility, which has been designated by the local service board to receive 911 service calls and dispatch emergency response services in accordance with the E911 service plan.

  • Development Location Point means a single point selected by the Applicant on the proposed Development site that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development. For a Development which consists of Scattered Sites, this means a single point on the site with the most units that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development.

  • Expiry Date (Data di Scadenza) means the "Expiry Date" as specified in § 1 of the Product and Underlying Data.

  • Test Well means a well constructed for the purpose of obtaining information needed to design a well prior to its construction. Test wells are cased and can be converted to observation or monitoring wells and under certain circumstances to production wells

  • Sending zone means an area of a municipality that the municipality

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Depth , in respect of a building, means the measured distance between the front line of the building and the back line of the rear main wall which separates the main building from the open space;

  • Running at Large means any dog while roaming, running or self-hunting off the property of its owner or custodian and not under its owner's or custodian's immediate control.

  • NERC Interchange Distribution Calculator means the NERC mechanism that is in effect and being used to calculate the distribution of energy, over specific transmission interfaces, from energy transactions.

  • Phase II Study means a study in humans of the safety, dose ranging or efficacy of a product, as further defined in 21 C.F.R. § 312.21(b) (or the equivalent thereof outside the United States).

  • Phase III Study means a human clinical trial that is prospectively designed to demonstrate statistically whether a product is safe and effective for use in humans in a manner sufficient to obtain regulatory approval to market such product in patients having the disease or condition being studied as described in 21 C.F.R. § 312.21(c) (FDCA), as amended from time to time, and the foreign equivalent thereof.

  • Phase III Trial means a Clinical Trial of an investigational product in subjects that incorporates accepted endpoints for confirmation of statistical significance of efficacy and safety with the aim to generate data and results that can be submitted to obtain Regulatory Approval as described in 21 C.F.R. 312.21(c), or a comparable Clinical Trial prescribed by the relevant Regulatory Authority in a country other than the United States.

  • stratigraphic test well means a drilling effort, geologically directed, to obtain information pertaining to a specific geologic condition. Ordinarily, such wells are drilled without the intention of being completed for hydrocarbon production. They include wells for the purpose of core tests and all types of expendable holes related to hydrocarbon exploration. Stratigraphic test wells are classified as (i) "exploratory type" if not drilled into a proved property; or (ii) "development type", if drilled into a proved property. Development type stratigraphic wells are also referred to as "evaluation wells".

  • Clinical record means a legible electronic or hard-copy history that documents the criteria established for medical records as set forth in rule 441—79.3(249A). A claim form or billing statement does not constitute a clinical record.

  • Proposal Due Date and Time means the date and time specified in the Request for Proposal as the deadline for submitting Proposals.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.