Tolerance Range definition

Tolerance Range means the numerical range added to the threshold value indicating the range where detected concentrations above the threshold value are acceptable due to recognised analytical inaccuracy and thus do not compromise the assumption of compliance.
Sample 1Sample 2Sample 3
Tolerance Range means in respect of a Service Customer the range of 75% to 150% of the Expected Read for that Service Customer;
Sample 1Sample 2Sample 3
Tolerance Range means a variation of plus or minus 5% above or below a given quantity of Product.
Sample 1Sample 2

Examples of Tolerance Range in a sentence

  • A Facility Tolerance Range will apply for a specific generation Facility in place of the Tolerance Range determined under clause 2.13.6D.

  • System Management may vary the Tolerance Range and any Facility Tolerance Ranges following this review.

  • System Management may determine a Facility Tolerance Range to apply to a specific generation Facility.

  • System Management must not show bias towards a Market Participant in respect to a Facility Tolerance Range.

  • System Management must document the procedure for determining and reviewing the annual Tolerance Range and any Facility Tolerance Ranges in the Power System Operation Procedure, and System Management and Market Participants must follow that documented Power System Operation Procedure.

  • System Management must document the procedure for determining and reviewing the annual Tolerance Range and any Facility Tolerance Ranges in a Power System Operation Procedure.

  • AEMO must not show bias towards a Market Participant in respect to a Facility Tolerance Range.

  • Price AnalysisRand Water uses a Financial Tolerance Range in order to assess how reasonable the market response prices are.

  • AEMO may determine the Tolerance Range to apply to all Facilities for the purpose of AEMO’s reporting of alleged breaches of clause 7.10.1 and section 3.21 to the Economic Regulation Authority under clause 2.13.6A.

  • In addition, planned ADB assistance for the state governments of Punjab and West Bengal will help with cash forecasting, developing debt management policies and strategies, improving revenue administration, targeting salary expenditures, transferring payments, and rationalizing subsidies.


More Definitions of Tolerance Range

Tolerance Range means, for any Day, either (i) a five percent (5%) overage or
Sample 1
Tolerance Range means, for any Day, either (i) a five percent (5%) overage or underage of the MDQ or (ii) the net cumulative amount of the daily overages and underages for that Day and each prior Day in the applicable Month, up to a maximum of two percent (2%) of the product of the then-current MDQ or MSQ and the number of days in such Month.
Sample 1

Related to Tolerance Range

  • Tolerance means a state of adaptation in which exposure to a drug induces changes that result in a diminution of one or more of the drug’s effects over time.

  • Zero tolerance means that the school will not tolerate the possession of any weapon by any person. The term “weapon” is defined as any object or substance which by its design, threatened use, or use could cause bodily injury or property damage, including any object which could reasonably be mistaken for a weapon. The division director and dean of student life shall use their discretion when interpreting the use and intent of such articles at school.

  • Density means the permitted number of dwelling units per

  • Altitude means the vertical distance of a level, a point or an object considered as a point, measured from mean sea level (MSL);

  • Working level (WL) means any combination of short-lived radon daughters in 1 liter of air that will result in the ultimate emission of 1.3E+5 MeV of potential alpha particle energy. The short-lived radon daughters are—for radon-222: polonium-218, lead-214, bismuth-214, and polonium-214; and for radon-220: polonium-216, lead-212, bismuth-212, and polonium-212.

  • Scaling as used herein, involves:

  • Working pressure means the maximum pressure to which a component is designed to be subjected to and which is the basis for determining the strength of the component under consideration. For CNG cylinder, the settled pressure of 20 MPa at a uniform temperature of 15 C. For LNG tank, the pressure of the LNG tank primary relief valve setting.

  • Turbidity means the cloudy condition of water due to the presence of extremely fine particulate materials in suspension that interfere with the passage of light.

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • Range means all the areas of land or water that a migratory species inhabits, stays in temporarily, crosses or overflies at any time on its normal migration route;

  • Slash means all debris created on the Work area by the precommercial thinning operation.

  • Pressure means the total load or force per unit area acting on a surface.

  • Exceedance means a condition that is detected by monitoring that provides data in terms of an emission limitation or standard and that indicates that emissions (or opacity) are greater than the applicable emission limitation or standard (or less than the applicable standard in the case of a percent reduction requirement) consistent with any averaging period specified for averaging the results of the monitoring.

  • Population means the population as ascertained at the last preceding census of which the relevant figures have been published;

  • Negative pressure respirator (tight fitting) means a respirator in which the air pressure inside the facepiece is negative during inhalation with respect to the ambient air pressure outside the respirator.

  • Ceiling means the height above the ground or water of the base of the lowest layer of cloud below 6 000 m (20 000 ft) covering more than half the sky;

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • Permeability of a space means the ratio of the volume within that space which is assumed to be occupied by water to the total volume of that space.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Infiltration rate means the rate of water entry into the soil expressed as a depth of water per unit of time (e.g., inches per hour).

  • Barrier Level means the Barrier Level as specified in § 1 of the Product and Underlying Data.

  • Noise means two times the root mean square of ten standard deviations, each calculated from the zero responses measured at a constant frequency which is a multiple of 1,0 Hz during a period of 30 seconds.

  • Baseline means the “Initial Small Business Lending Baseline” set forth on the Initial Supplemental Report (as defined in the Definitive Agreement), subject to adjustment pursuant to Section 3(a).

  • manoeuvring area means that part of an aerodrome to be used for the take-off, landing and taxiing of aircraft, excluding aprons;

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.