TNI Standard definition

TNI Standard means The NELAC Institute (TNI) Standard titled "Requirements for the National Environmental Laboratory Accreditation Program", incorporated by reference in Section 186.115.
Sample 1Sample 2Sample 3
TNI Standard means the performance standard for analytical testing of environmental samples and the laboratory accreditation process adopted by TNI, current to the date incorporated by reference in this Chapter.
Sample 1

Examples of TNI Standard in a sentence

  • Refer to the sample handling and preservation regulations set forth in 40 CFR 136, 25 Pa. Code Chapter 252, The NELAC Institute (TNI) Standard, and the appropriate EPA methods.

  • The quality assurance and control (QA/QC) requirements and test acceptability standards specified in EPA’s test methods and the requirements set forth in 25 Pa Code Chapter 252 or the TNI Standard must be followed.

  • Moreover, due to a shared Canadian identity norms and values are shared as well.

  • The committee may, subject to the restrictions in 5.3.8, prioritize the comments and may place any comments on hold until the next revision cycle of the standard, if the comments are too numerous to be dealt with in the time-frame available until the TNI Standard is published.

  • All analytical data must be submitted in a format approved by the Department Project Manager and shall meet the requirements of LAC 33:I.5313 and the standard currently promulgated by The National Environmental Laboratory Accreditation Conference (NELAC) Institute (TNI Standard), Environmental Laboratory Sector, Volumes 1 and 2.

  • All analytical data must be submitted in a format approved by the Department Project Manager and meet the requirements of LAC 33:I.5313 and the standard currently promulgated by The NELAC Institute (TNI Standard), Environmental Laboratory Sector, Volumes 1 and 2.

  • If any appeal is upheld by the appeals panel, the affected module or section of the TNI Standard is withdrawn by the Expert Committee that developed that module or section for processing during the next revision cycle.

  • Other measures (e.g., precision, bias, and selectivity) as outlined in the 2009 TNI Standard Test Modules 3-7 must be performed to satisfy the PT requirement until those PT samples are available.

  • When PT samples for an analyte-matrix-method combination cannot be obtained from any PT provider, and the analyte-matrix-method combination is required for a scope of accreditation, the laboratory shall submit this fact in writing to their DOECAP-AP Accreditation Body (AB).Other measures (e.g., precision, bias, and selectivity) as outlined in the appropriate 2009 TNI Standard Test Modules must be performed to satisfy the PT requirement until those PT samples are available.

  • President’s MessageOur policy with regard to the distribution of profits is to pay a stable dividend, while taking into account the Company’s business performance from a long-term perspec- tive, in order to strengthen our financial position.Under this policy, we are ensuring retention of sufficient funds to finance the research and development activities and capital investment required for future expansion.

Related to TNI Standard

  • safety standard means the Code of Practice for the Wiring of Premises SANS 10142-1 incorporated in the Regulations;

  • Uniform standard means a standard adopted by the Commission for a Product line, pursuant to Article VII of this Compact, and shall include all of the Product requirements in aggregate; provided, that each Uniform Standard shall be construed, whether express or implied, to prohibit the use of any inconsistent, misleading or ambiguous provisions in a Product and the form of the Product made available to the public shall not be unfair, inequitable or against public policy as determined by the Commission.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • harmonised standard means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • European standard means a standard adopted by the European Committee for Standardisation, the European Committee for Electrotechnical Standardisation or the European Telecommunications Standards Institute and made available for public use;

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Community-Wide Standard means the standard of conduct, maintenance or other activity generally prevailing in the Community. Such standard may be more specifically determined by the Board of Directors of the Association. Such determination, however, must be consistent with the Community-Wide Standard originally established by the Declarant.

  • Renewable Energy Standard means the minimum renewable energy capacity portfolio, if applicable, and the renewable energy credit portfolio required to be achieved under section 28 or former section 27.

  • Disturbance Control Standard or “DCS” shall mean the reliability standard that sets the time limit following a disturbance within which a balancing authority must return its Area Control Error to within a specified range.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • national standard means a standard adopted by a national standardisation organisation and made available to the general public;

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Technical standard means a document that specifies design, predicted performance and operation and maintenance specifications for a material, device or method.

  • Contract Standard means such standard as complies in each and every respect with all relevant provisions of the Contract;

  • California Renewables Portfolio Standard means the renewable energy program and policies established by California State Senate Bills 1038 and 1078 as amended by Senate Bill SB1X, and codified in California Public Utilities Code Sections 399.11 through 399.31 and California Public Resources Code Sections 25740 through 25751, as such provisions are amended or supplemented from time to time.

  • Common Reporting Standard means the standard for automatic exchange of financial account information in tax matters (which includes the Commentaries), developed by the OECD, with G20 countries;

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Energy efficiency portfolio standard means a requirement to

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);