Time Delay definition

Time Delay means the time between (i) in the case of incoming messages, arrival the message at the CP System and availability of the message to the User on the Web Mail Page or via the POP3 server, and (ii) in the case of outbound messages, receipt of a "send" command from a user either on the Web Mail Page or via the SMTP server and such message leaving the CP System into the Internet or being delivered locally to another CP System User.
View Source
Time Delay. – means a delay of a non-specific time period.
View Source

Examples of Time Delay in a sentence

  • Initiate Time Delay to Start Alternate Source Engine Generator: Upon initiation by normal source monitor.

  • Time Delay To Start Alternate Source Engine Generator: 0 to 3 seconds, adjustable.

  • Statistics shall be kept for all units of Equipment and Replacement Equipment to determine the Operating Time, Delay Time, Mechanical Down Time and Idle Time and these shall be used to calculate the Mechanical Availability, Effective Utilization, Overall Utilization and Operating Efficiency for each unit.

  • See Also: Pre-Input Character Translation Table The Port Analyze Menu Option If your incoming serial data is not always transmitted as fixed length strings and there also is no specific character within the data that can be used to signal the end of each data record but the data is transmitted in bursts such that there will always be a small time delay between data inputs, then Time Delay Between Records should be chosen.

  • For example if your device transmitted the following data in bursts with some time between bursts, you could define the "End Of Record Event" as either "Carriage Return or CrLf Received" or as "Time Delay Between Records".

  • Time Delay to Start Alternate Source Engine Generator: 0.6 to 6 seconds, adjustable.

  • If you specified "Time Delay Between Records" then the entire transmission would be read in as a single data record.

  • Tenant reserves the right to approve the Additional Construction Cost and Estimated Time Delay within three (3) days of the date the General Contractor provides the same to Tenant.

  • Network condition Time Delay (One-Way) PER Jitter Good £40ms £0.1% £1ms Normal £100ms £1% £20ms Bad £400ms £5 % £60ms To ensure QoS, IP bearer network should at least meet the criteria that jitter should be less than 10ms and PER should be less than 1%.

  • In this module, the cloud will authorize both the owner and the user and do the following operations such as View all Users, View all Data Files ,View all Migrated File, View all transactions, View all attackers, View Time Delay Results, View Throughput Results.