Thoroughly clean definition

Thoroughly clean means that the food handler vigorously washes the entire surface of his or her hands using soap or other effective means. Scientific studies have shown that to effectively remove pathogenic microorganisms, hands should be wet, well covered with soap and scrubbed for 15 to 30 seconds, including palms, between fingers, under nails, the back of hands, thumbs and wrists (Todd et al 2010a). Clean nail brushes may assist in scrubbing off dough and other hard-to-remove food residues. Hands should be thoroughly rinsed with clean water. Care must be taken to avoid re-contaminating washed hands, for example by using a clean paper towel or elbow to turn off taps that are manually operated.
Thoroughly clean means that the food handler vigorously washes the entire surface of his or her hands using soap or other effective means. Scientific studies have shown that to effectively remove pathogenic microorganisms, hands should be wet, well covered with soap and scrubbed for 15 to 30 seconds, including palms, between fingers, under nails, the back of hands, thumbs and wrists (Todd et al 2010a). Clean nail brushes may assist in scrubbing off dough and other hard-to-remove food residues.

Examples of Thoroughly clean in a sentence

  • Thoroughly clean piping, conduit, and similar features before applying paint or other finishing materials.

  • Thoroughly clean toilets, toilet seats, and urinals with approved acid free bowl cleaner, rinse thoroughly.

  • Thoroughly clean all walls (including switch and plug covers), doors (including entrance doors inside and outside), partitions and handrails with proper approved chemicals and proper approved dilution.

  • Thoroughly clean shoes before reuse.In case of eye contact:Flush eyes with water as a precaution.Get medical attention if irritation develops and persists.If swallowed:If swallowed, DO NOT induce vomiting.

  • Thoroughly clean all glass and mirrors using an approved alcohol based glass cleaner.

  • Thoroughly clean entire exterior surface with approved cream cleanser.

  • Cleaning and Tightening: Thoroughly clean forms and adjacent surfaces to receive concrete.

  • Thoroughly clean all sinks, including bottom, faucets, and spigots, with approved crème cleanser.

  • Thoroughly clean all stainless steel (brass) not previously mentioned with approved cleaner and a clean soft cloth.

  • Thoroughly clean piping, conduit and similar features before painting or other finishing is applied.

Related to Thoroughly clean

  • Dry cleaning means the process of cleaning articles using perchloroethylene.

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Easily cleanable means that surfaces are readily accessible and made of such materials and finish and so fabricated that residue may be effectively removed by normal cleaning methods.

  • Highly toxic means any substance that falls within any of the

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Excess Contribution means a contribution that exceeds the

  • ACP means the "Actual Contribution Percentage" determined pursuant to Section 12.6(d).

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Tests means and include such test or tests to be carried out on the part of the contractor as are prescribed in the contract or considered necessary by BHEL, in order to ascertain the quality, workmanship, performance and efficiency of the contractor or part thereof.

  • COVID-19 symptoms means fever of 100.4 degrees Fahrenheit or higher, chills, cough, shortness of breath or difficulty breathing, fatigue, muscle or body aches, headache, new loss of taste or smell, sore throat, congestion or runny nose, nausea or vomiting, or diarrhea, unless a licensed health care professional determines the person’s symptoms were caused by a known condition other than COVID-19.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Excess Contributions means, with respect to any Plan Year, the excess of:

  • Flocculation means a process to enhance agglomeration or collection of smaller floc particles into larger, more easily settleable particles through gentle stirring by hydraulic or mechanical means.

  • Wood cleaner means a product labeled to clean wooden materials including but not limited to decking, fences, flooring, logs, cabinetry, and furniture. “Wood Cleaner” does not include “Dusting Aid,” General Purpose Cleaner,” “Furniture Maintenance Product,” “Floor Wax Stripper,” “Floor Polish or Wax,” or products designed and labeled exclusively to preserve or color wood.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • Monitoring well means a water well intended for the purpose of determining groundwater quality or quantity.

  • Tests after Completion means the tests (if any) which are specified in the Contract and which are carried out in accordance with the Specification after the Works or a Section (as the case may be) are taken over by the Procuring Entity.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Positive Test Result means a finding of the presence of drugs, alcohol, or their metabolites in the sample tested in levels at or above the threshold detection levels contained in the standards of one of the programs listed in Minn. Stat. § 181.953, Subd. 1.

  • Field-flattening filter means a filter used to homogenize the absorbed dose rate over the radiation field.

  • Stability means structural stability.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Treatability study means a study in which a hazardous waste is subjected to a treatment process to determine: (1) Whether the waste is amenable to the treatment process, (2) what pretreatment (if any) is required, (3) the optimal process conditions needed to achieve the desired treatment, (4) the efficiency of a treatment process for a specific waste or wastes, or (5) the characteristics and volumes of residuals from a particular treatment process. Also included in this definition for the purpose of the § 261.4 (e) and (f) exemptions are liner compatibility, corrosion, and other material compatibility studies and toxicological and health effects studies. A “treatability study” is not a means to commercially treat or dispose of hazardous waste.