Thermal Oxidizer definition

Thermal Oxidizer means combustion equipment fired with gaseous fuel and used to control emissions of air contaminants from industrial or commercial processes.
Sample 1Sample 2Sample 3
Thermal Oxidizer means a type of control apparatus which reduces the emission of air contaminants by subjecting the gases being emitted to elevated temperatures which cause the air contaminant molecules to decompose within an enclosed space. For the purposes of this subchapter, this term includes catalytic and non-catalytic thermal oxidizers.
Sample 1Sample 2Sample 3
Thermal Oxidizer means the thermal oxidizer described in the Company's application, this Certificate and in the supporting documentation referred to herein, to the extent approved by this Certificate.
Sample 1Sample 2Sample 3

Examples of Thermal Oxidizer in a sentence

  • A Regenerative Thermal Oxidizer (RTO) shall be installed and utilized to control the VOC and HAPs emissions from the 614 CURING/COOLING.

  • A Regenerative Thermal Oxidizer (RTO) shall be installed and utilized to control the VOC and HAPs emissions from the 613 CURING/COOLING.

  • Demonstration of the switching of the acid gas stream from the H2S removal Unit to the Thermal Oxidizer and back will also occur.

  • In addition, the Microbiology Executive Committee will formally evaluate the progress of each student at the end of every academic year.

  • BACT and MACT for SN-02 have been determined to be a shared system of multi-clones followed by a TCO/RTO (Thermal Catalytic Oxidizer/Regenerative Thermal Oxidizer).

  • Exhaust from these burners is routed through the Regenerative Thermal Oxidizer (RTO, SN-01) under normal operating conditions.

  • During marine loading of gasoline and light crude oil, VOC emissions shall be controlled by the Marine Barge Loading Thermal Oxidizer [MLDOX/ 00A-04].

  • The permittee shall maintain a control device, a Regenerative Thermal Oxidizer (RTO), capable of achieving a destruction efficiency of at least 95% for VOC emissions.

  • The owner or operator shall properly operate and maintain equipment to continuously monitor the temperature of the Thermal Oxidizer.

  • All periods in excess of 5 minutes and their durations during which the combustion temperature at the point of incineration is less than 1200 degrees F, where the provisions of Env-A 2603.01(a)(2) apply (Gases are combusted in an incinerator or other device (Thermal Oxidizer or Package Boiler No. 15).


More Definitions of Thermal Oxidizer

Thermal Oxidizer means a combustion device that eliminates VOC, CO, and volatile HAP emissions by combusting them to carbon dioxide (CO2) and water. The device maintains a minimum temperature in the combustion chamber to eliminate pollutants.
Sample 1Sample 2Sample 3
Thermal Oxidizer means an enclosed device that de- stroys organic compounds by thermal oxidation.
Sample 1Sample 2
Thermal Oxidizer. A gas combustion boiler.
Sample 1Sample 2
Thermal Oxidizer means the thermal oxidizer, operated at 2 second retention time and 871 degrees Celsius, used for the incineration of reactor off gases and condensate and thin tank vapours as described in the ESDM Report, this Certificate and in the Supporting Documentation referred to herein and any other equipment or processes.
Sample 1
Thermal Oxidizer means an enclosed device that destroys organic compounds by thermal oxidation.
Sample 1
Thermal Oxidizer means every thermal oxidizer (including the #1 Melt Shop EAF Ladle Heater and Post Combustion incinerator, and the No. 1 By Products Stretford Tower thermal incinerator) described in the Company's application, ESDM Report, this Certificate and in the supporting documentation referred to herein, to the extent approved by this Certificate.
Sample 1

Related to Thermal Oxidizer

  • Biomass means the biodegradable fraction of products, waste and residues from biological origin from agriculture (including vegetal and animal substances), forestry and related industries including fisheries and aquaculture, as well as the biodegradable fraction of industrial and municipal waste;

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • Pressurized gas duster means a pressurized product labeled to remove dust from a surface solely by means of mass air or gas flow, including surfaces such as photographs, photographic film negatives, computer keyboards, and other types of surfaces that cannot be cleaned with solvents. “Pressurized Gas Duster” does not include “Dusting Aid.”

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Total tetrahydrocannabinol means the sum of the percentage by weight of tetrahydrocannabinolic acid multiplied by eight hundred seventy-seven thousandths plus the percentage of weight of tetrahydrocannabinol.

  • Carbon dioxide or “CO2” means the most common of the six primary greenhouse gases, consisting on a molecular level of a single carbon atom and two oxygen atoms.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • heat pump means a machine, a device or installation that transfers heat from natural surroundings such as air, water or ground to buildings or industrial applications by reversing the natural flow of heat such that it flows from a lower to a higher temperature. For reversible heat pumps, it may also move heat from the building to the natural surroundings;

  • Coagulation means a process using coagulant chemicals and mixing by which colloidal and suspended materials are destabilized and agglomerated into flocs.

  • CO2 means carbon dioxide.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Color additive means a material that either:

  • Bottled water means water that is placed in a safety sealed container or package for

  • Cannabinoid concentrate means a substance obtained by separating cannabinoids from marijuana by:

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.