Test Process definition

Test Process means the process for testing Products, including test capacity planning, testing Products, and performing preventative maintenance on the test equipment as more specifically set forth in the relevant Virtual Systems House Agreement.
Sample 1Sample 2Sample 3
Test Process means the process by which the Supplier carries out system testing of a Patch in a controlled, test environment against a Test Device to determine whether such Patch is Compatible with the continued operation of the Test Device in accordance. Service Level Agreement CVSS 3.1 Scoring Implementation timeframe 9.0-10.0 (Critical) Within 30 calendar days for critical patches to full resolution through application of patch(es) or alternative measures as appropriate 7.0-8.9 (High) Either at next minor release OR within 1 calendar month of vulnerability identification, whichever is earlier 0.1-6.9 (Medium and Low) Either at next major release OR within 3 calendar months of vulnerability identification, whichever is earlier Out of Scope The following services are out of scope:
Sample 1
Test Process means with respect to the Plasma Testing Field (a) the polymerase chain reaction process covered by the method claims of US 4,683,195 and 4,683,202, the foreign counterparts thereof and any reissue and/or reexamination patent rights thereof, (b) the reverse transcription process covered by the method claims of US 5,407,800, US 5,322,770 and US 5,310,652, the foreign counterparts thereof and any reissue and/or reexamination patent rights thereof, or (c) the method claims of US 5,008,182, US 5,176,995 and US 5,219,727, and claims 1-4, 8, 9 and 15-18 of US 5,476,774, the foreign counterparts thereof and any reissue and/or reexamination patent rights thereof.
Sample 1

Examples of Test Process in a sentence

  • NEM13 File Test Process This document details various implementation test scenarios required for acceptance of the NEM12 and NEM13 file format specification by MDPs.

  • The 2-Step TB Skin Test Process is as follows:o Visit 1: PPD antigen is applied under the skino Visit 2: takes place 48-72 hours after PPD is given in forearm and results read by the medical facility staff.

  • Sign-off on the Test Process with the BCRCOnce the trading partner is satisfied with the test results, complete the Test Sign off Acceptance Form.

  • If the need for a Witness Test has been identified during the review process (or in the ISA), Interconnecting Customers in the Expedited Process should refer to the “Standard Process Completion Documentation” checklist and the Witness Test Process webpage for more information.

  • VOM in the QC test fluid is emitted throughout the QC Test Process as well as in the drying oven.

  • The Facility will calibrate the automated QC Test Process equipment to spray an average of no more than 48 grams of QC test fluid per drum with compliance to be measured at least once per calendar quarter by the following procedure.

  • An attribute is a quality or feature of something (e.g., survivability, persistence, availability) (AFOTECMAN 99-101, Operational Test Process and Procedures).

  • The Facility will reduce VOM emissions from its automated QC Test Process by using a test fluid composed of no more than 45 percent denatured alcohol by weight and no less than 55 percent water by weight.

  • Development Test Process Conformance Checklist...........................................................

  • For Medigap claim-based trading partners, please refer to Chapter 4: COBA Technical Reference, for additional information on the testing procedures.Sign off on the Test Process with the BCRCOnce the trading partner is satisfied with the test results, the trading partner’s testing team needs to submit a Test Sign-off Acceptance Form.

Related to Test Process

  • RFP Process or “Bidding Process” means the process governing the submission and evaluation of the Bids as set out in the RFP itself;

  • Procurement Process means the process commenced by the issuing of this Invitation and concluding upon the award of a contract (or other outcome as determined by Tetra Tech International Development) or upon the earlier termination of the process

  • Test Plan means a plan for the Testing of the or Deliverables and other agreed criteria related to the achievement of Milestones as described further in paragraph 4 of Call Off Schedule 4;

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Test Facility means any WRAS suitably accredited test laboratory;

  • Test Report means a written report issued by The Sequoia Project that documents the outcomes of the Testing Process; that is, the Applicant’s compliance with the Specifications and Test Materials.

  • Test Pass has the meaning stated in Section 3.4(a).

  • Test Strategy means a strategy for the conduct of Testing as described further in paragraph 3 of schedule 4;

  • Support Call Process means the support call process applicable to all of our customers who have licensed the Tyler Software. A copy of our current Support Call Process is attached as Schedule 1 to Exhibit C.

  • Manufacturing Process means any process for—

  • E-Auction Process /”E-Auction” shall mean the electronic auction process for sale of the Company conducted in accordance with the provisions of IBC, Liquidation Process Regulations, Applicable Law(s) and this E- Auction Process Information Document inviting Bid from the Bidders for consummating the sale of Company on going concern basis in accordance with the provisions of IBC and Liquidation Process Regulations;

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Test cycle means a sequence of test points each with a defined speed and torque to be followed by the engine under steady state (WHSC) or transient operating conditions (WHTC).

  • CEMS means continuous emissions monitoring system.

  • Cannabis processing facility means a person that:

  • Bondable stranded costs means any stranded costs or basic

  • Operational Flow Order means any directive issued to a Customer by KUB which requires the Customer to adjust Deliveries to KUB or deliveries of non-Firm gas to the Customer by KUB.

  • Critical Test Concentration or "(CTC)" means the specified effluent dilution at which the Permittee is to conduct a single-concentration Aquatic Toxicity Test.

  • Process Gas means gas used for which altemate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • Pendency of the procurement process means the time period commencing with the public notice of the request for proposals and ending with the award of the contract or the cancellation of the request for proposals.

  • Process or “Processing” means any operation or set of operations which is performed upon the Personal Data, whether or not by automatic means, such as collection, recording, organization, storage, adaptation or alteration, retrieval, consultation, disclosure by transmission, dissemination or otherwise making available, alignment or combination, blocking, erasure, or destruction.

  • Application Process means the online application process under which the Applicant applies for Hospitality Packages on the Webshop.

  • Ordering Document or "order" means a document that is expressly governed by the terms and conditions of this Agreement by which, when accepted by Oracle, You order Services from Oracle.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.