Tamper with definition

Tamper with means to remove or render inoperative, to cause to be removed or rendered inoperative, or to make less operative an emission control device or an element of an emission control device that is required by the clean air act to be installed in or on a motor vehicle.
Sample 1Sample 2Sample 3
Tamper with means to remove or render inoperative, to cause to be removed or rendered inoperative, or to make less operative an emission control device or an element of an emission control device that is
Sample 1Sample 2Sample 3
Tamper with means to remove permanently or temporarily, except for repair, replacement or converting for use of a clean alternative fuel, to bypass, defeat, or render inoperative, in whole or in part, any emission control system that is installed on or in a motor vehicle, for purposes of defeating, bypassing or otherwise circumventing the requirements of the Clean Air Act Amendments or Chapter 3704. of the Revised Code and the rules promulgated thereunder.
Sample 1

Examples of Tamper with in a sentence

  • Retail Customer shall not Tamper with Company’s facilities or the Meter on Retail Customer’s Premises.

  • Consistent with Section 5.2, LIMITS ON LIABILITY (which limits any legal liability only as expressly stated therein), Retail Customer shall have a duty to exercise reasonable care not to damage Company Delivery System facilities on Retail Customer’s Premises and shall not be considered to be a bailee or to have possession of those facilities.Retail Customer shall not Tamper with Company’s facilities or the Meter on Retail Customer’s Premises.

  • Tamper with or modify technology, utilities, and configurations, or modify access control permissions, either with or without malicious intent.

  • Tamper with computer hardware or software, attempt unauthorized entry into computers, and/or vandalize or destroy the computer or computer files.

  • In either case, the matter should be pursued as an apparent Filing Failure, and/or (where the circumstances warrant) as an evasion of Sample collection under Code Article 2.3, and/or as Tampering or Attempting to Tamper with Doping Control under Code Article 2.5. Further information on Whereabouts Filing requirements can be found in WADA’s Guidelines for Implementing an Effective Testing Program.

  • Tamper with or render inaccurate a monitoring device or method required by any law or by any order, rule, license, permit, approval or decision of the board or commissioner; or[PL 2003, c.

  • Tamper with, or fail to operate and maintain a vessel monitoring sys- tem as specified in § 635.69.

  • Tamper with the tangible property of one or both of the parties, including any document that represents or embodies anything of value, thereby causing monetary loss to the other party.

  • Tamper with or injure a voting device, ballot or other record or equipment used in the election or interfere with the correct operation of such a device or equipment or the secrecy of voting; or[PL 2003, c.

  • Tamper with, disconnect, damage, destroy, alter, or in any way distort, render useless, inoperative, ineffective, or inaccurate any component of the EM system or associated equipment.


More Definitions of Tamper with

Tamper with means to remove or render inoperative, or
Sample 1Sample 2
Tamper with means to remove permanently, bypass, defeat, or render inoperative, in whole or part, any emission control system that is installed on or in a motor vehicle.
Sample 1Sample 2

Related to Tamper with

  • Antique firearm means a firearm or replica of a firearm not designed or redesigned for using rim fire or conventional center fire ignition with fixed ammunition and manufactured in or before 1898, including any matchlock, flintlock, percussion cap, or similar type of ignition system and also any firearm using fixed ammunition manufactured in or before 1898, for which ammunition is no longer manufactured in the United States and is not readily available in the ordinary channels of commercial trade.

  • Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

  • (ii) provisions" shall mean "provisions, terms, agreements, covenants and/or conditions"; (iii) "lien" shall mean "lien, charge, encumbrance, title retention agreement, pledge, security interest, mortgage and/or deed of trust"; (iv) "obligation" shall mean "obligation, duty, agreement, liability, covenant and/or condition"; (v) "any of the Leased Premises" shall mean "the Leased Premises or any part thereof or interest therein"; (vi) "any of the Land" shall mean "the Land or any part thereof or interest therein"; (vii) "any of the Improvements" shall mean "the Improvements or any part thereof or interest therein"; (viii) "any of the Equipment" shall mean "the Equipment or any part thereof or interest therein"; and (ix) "any of the Adjoining Property" shall mean "the Adjoining Property or any part thereof or interest therein".

  • Gasket or thread locking adhesive remover means a product designed or labeled to remove gaskets or thread locking adhesives. Products labeled for dual use as a paint stripper and gasket remover and/or thread locking adhesive remover are considered “Gasket or Thread Locking Adhesive Remover.”

  • Tamper means to interfere with something improperly, meddle with it, make unwarranted

  • (b) domestic industry” means the domestic producers as a whole engaged in the manufacture of the like article and any activity connected therewith or those whose collective output of the said article constitutes a major proportion of the total domestic production of that article except when such producers are related to the exporters or importers of the alleged dumped article or are themselves importers thereof in such case the term ‘domestic industry’ may be construed as referring to the rest of the producers”

  • Tampering means the unauthorized connecting, disconnecting, or causing to be connected or disconnected, or in any other manner interfering with the operation of the Company’s meters, pipes, conduits, other equipment or attachments, or as otherwise provided by this Tariff (see Sections 6.6, 6.13, and 6.15).

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Outdoors means any location that is not “indoors” within a fully enclosed and secure structure as defined herein.

  • Alarm user means the person, firm, partnership, association, corporation, company, or organization of any kind in control of any building, structure, or facility or portion thereof wherein an alarm system is maintained.

  • Falconry means the sport of taking quarry by means of a trained raptor.

  • Polyolefin adhesive means an aerosol adhesive designed to bond polyolefins to substrates.

  • Façade means the principal front or fronts of a building.

  • Mounting adhesive means an aerosol adhesive designed to permanently mount photographs, artwork, and any other drawn or printed media to a backing (paper, board, cloth, etc.) without causing discoloration to the artwork.

  • Automotive Wax, Polish, Sealant or Glaze means a product designed to seal out moisture, increase gloss, or otherwise enhance a motor vehicle’s painted surfaces. “Automotive Wax, Polish, Sealant or Glaze” includes, but is not limited to, products designed for use in autobody repair shops and “drive-through” car washes, as well as products designed for the general public. “Automotive Wax, Polish, Sealant or Glaze” does not include “Automotive Rubbing or Polishing Compounds”, automotive wash and wax products, surfactant-containing car wash products, and products designed for use on unpainted surfaces such as bare metal, chrome, glass, or plastic.

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.

  • Liquid-mounted seal means a primary seal mounted in continuous contact with the liquid between the tank wall and the floating roof around the circumference of the tank.

  • Mobile Banking means the banking services accessible from the Device you have registered with us for Mobile Banking.

  • Mobile Banking Service means the EB Services which we enable you to access via the Mobile Banking App or a web browser designed for use on a Mobile Device; and

  • Smoke means the gases, particles, or vapors released into the air as a result of combustion, electrical ignition or vaporization, when the apparent or usual purpose of the combustion, electrical ignition or vaporization is human inhalation of the byproducts, except when the combusting or vaporizing of materials contains no tobacco or nicotine and the purpose of the inhalation is solely olfactory, such as, for example, smoke from incense. The term "smoke" includes, but is not limited to, tobacco smoke, electronic cigarette vapors, and cannabis smoke.

  • Edge of any water means the outer edge of the water's bankfull width or, where applicable, the outer edge of the associated channel migration zone.

  • Outboard motor means a detachable self-contained propulsion unit, excluding

  • Date Data means any data of any type that includes date information or which is otherwise derived from, dependent on or related to date information.

  • NBOME means the National Board of Osteopathic Medical Examiners.

  • Computer contaminant means any set of computer instructions that are designed—

  • Body-worn camera means a visual and audio recording device worn on the person of a peace officer while the peace officer is engaged in the performance of the peace officer's duties.