System Defect definition

System Defect means a Defect latent in all or almost all ( at least 75 %) of the Delivery Items already delivered.
Sample 1Sample 2Sample 3
System Defect means an Incident that has been determined to be caused by a defect in the Software or the Hardware on which such Software is delivered.
Sample 1Sample 2
System Defect. An error, flaw, or fault in a Contractor-managed MFMP system that: 1) causes the system to produce an incorrect or unexpected result or to behave in an unintended way contrary to the agreed-upon design requirements of the system; or 2) unexpectedly changes an existing process as a result of implementing new functionality.
Sample 1Sample 2

Examples of System Defect in a sentence

  • WARRANTY PARTS LISTThe 5 years/60,000 miles California Emission Control System Defect Warranty covers any part that can affect emissions.

  • Moreover, a reasonable consumer would consider the HVAC System Defect to be an undesirable quality, as Plaintiffs and Class Members did.

  • Had Plaintiffs and Class Members known that the Class Vehicles had the HVAC System Defect, they would not have purchased or leased a Class Vehicle, or would have paid less for them.

  • The Supplier shall notify the Buyer if the Supplier becomes aware of any System Defect in similar items delivered by the Supplier to other customers.

  • In case of a System Defect DALO is furthermore entitled to claim an appropriate price reduction in accordance with the above-mentioned principles.

  • In the event of a System Defect, the Supplier shall replace or modify, free of charge, all the Delivery Items according to the Agreement in order to eliminate the cause of the (Sys- tem) Defect in question in all the Deliverables without deviating from the specifications.

  • If the Supplier can document that the System Defect in question is limited to a specific product type produced within the same batch or batches, the replace- ment or modification of the Delivery Items may be limited to those Delivery Items produced within the same batch or batches.

  • A multi-billion dollar vehicle design and manufacturing company such as Mercedes undoubtedly tracks and has tracked such sites and was aware or should reasonably have been aware of the HVAC System Defect in the Class Vehicles.

  • By 2008 at the latest, Mercedes had exclusive knowledge of material facts concerning the existence of the HVAC System Defect in its Class Vehicles.

  • Mercedes knew or should have known of the HVAC System Defect from at least as early as this arbitration hearing in 2008.


More Definitions of System Defect

System Defect means such defects that occurred during the warranty period, in at least 15% but not less than four Goods of the same type delivered on the basis of the Orders; if the Goods are delivered in meters, the occurrence of a quality defect in the length exceeding 40 meters is treated as a System Defect in total.
Sample 1
System Defect means a Defect latent in at least 5 % of the Delivery Items already delivered.
Sample 1

Related to System Defect

  • Latent Defect means a defect, inherently lying within the material or arising out of design deficiency, which do not manifest themselves and/or was not reasonably discoverable during Defect Liability period.

  • Minor defect means a defect which is not a Major Defect.

  • Latent Defects means such defects caused by faulty designs, material or work-man- ship which cannot be detected during inspection, testing etc, based on the technology available for carrying out such tests.

  • Nonconformance as used in this clause means a condition of any hardware, software, material, or service/workmanship in which one or more characteristics do not conform to requirements.

  • Major Defect means a condition that exists on a ground ambulance vehicle that requires the Department or the certificate holder to place the ground ambulance vehicle out-of-service.

  • Nonconformity or “Nonconformities” means any failure or failures of the Software to conform to the requirements of this Contract, including any applicable Documentation.

  • Construction defect means a deficiency in or a deficiency arising out of the design, specifications, surveying, planning, supervision, or observation of construction or construction of residential improvements that results from any of the following:

  • Defective Work means (a) Work that is unsatisfactory, deficient or damaged, does not conform to the Contract Documents, or does not meet the requirements of any inspection, test or approval, or (b) Work associated with punch list items that the Contractor fails to complete within a reasonable time after issuance of the punch list by the Project Manager.

  • Correction as used in this clause, means the elimination of a defect.

  • quality (functionality means the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs F.1.4 Communication and employer’s agentEach communication between the employer and a tenderer shall be to or from the employer's agent only, and in a form that can be read, copied and recorded. Writing shall be in the English language. The employer shall not take any responsibility for non-receipt of communications from or by a tenderer. The name and contact details of the employer’s agent are stated in the tender data. F.1.5 The employer’s right to accept or reject any tender offer F.1.5.1 The employer may accept or reject any variation, deviation, tender offer, or alternative tender offer, and may cancel the tender process and reject all tender offers at any time before the formation of a contract. The employer shall not accept or incur any liability to a tenderer for such cancellation and rejection, but will give written reasons for such action upon written request to do so. F.1.5.2 The employer may not subsequent to the cancellation or abandonment of a tender process or the rejection of all responsive tender offers re-issue a tender covering substantially the same scope of work within a period of six months unless only one tender was received and such tender was returned unopened to the tenderer. F.2 Tenderer’s obligations F.2.1 EligibilitySubmit a tender offer only if the tenderer satisfies the criteria stated in the tender data and the tenderer, or any of his principals, is not under any restriction to do business with employer. F.2.2 Cost of tenderingAccept that the employer will not compensate the tenderer for any costs incurred in the preparation and submission of a tender offer, including the costs of any testing necessary to demonstrate that aspects of the offer satisfy requirements. F.2.3 Check documentsCheck the tender documents on receipt for completeness and notify the employer of any discrepancy or omission. F.2.4 Confidentiality and copyright of documentsTreat as confidential all matters arising in connection with the tender. Use and copy the documents issued by the employer only for the purpose of preparing and submitting a tender offer in response to the invitation. F.2.5 Reference documentsObtain, as necessary for submitting a tender offer, copies of the latest versions of standards, specifications, conditions of contract and other publications, which are not attached but which are incorporated into the tender documents by reference. F.2.6 Acknowledge addendaAcknowledge receipt of addenda to the tender documents, which the employer may issue, and if necessary apply for an extension to the closing time stated in the tender data, in order to take the addenda into account. F.2.7 Clarification meetingAttend, where required, a clarification meeting at which tenderers may familiarize themselves with aspects of the proposed work, services or supply and raise questions. Details of the meeting(s) are stated in the tender data. F.2.8 Seek clarificationRequest clarification of the tender documents, if necessary, by notifying the employer at least five working days before the closing time stated in the tender data. F.2.9 InsuranceBe aware that the extent of insurance to be provided by the employer (if any) might not be for the full cover required in terms of the conditions of contract identified in the contract data. The tenderer is advised to seek qualified advice regarding insurance. F.2.10 Pricing the tender offer F.2.10.1 Include in the rates, prices, and the tendered total of the prices (if any) all duties, taxes (except Value Added Tax (VAT), and other levies payable by the successful tenderer, such duties, taxes and levies being those applicable 14 days before the closing time stated in the tender data. F2.10.2 Show VAT payable by the employer separately as an addition to the tendered total of the prices.

  • Problem means an unknown underlying cause of one or more Incidents. It becomes a Known Error when the root cause is known and a temporary workaround or permanent alternative has been identified.

  • Nonconforming structure means a structure the size, dimension or location of which was lawful prior to the adoption, revision or amendment of a zoning ordinance, but which fails to conform to the requirements of the zoning district in which it is located by reasons of such adoption, revision or amendment.

  • Nonconforming sign means a sign or sign structure, other than a nonstandard sign or a sign that is erected and maintained in a business area along a scenic byway prior to the designation as a scenic byway, that satisfies 1 of the following:

  • The Specification means the Specification annexed to or issued with G.T.C.C. and shall include the schedules & drawings attached thereto as well as all samples and pattern, if any.

  • Document Defect As defined in Section 2.03(a).

  • Nonconforming use means a use of land that:

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.

  • Material Defect As defined in Section 2.02(c) hereof.

  • Product Warranty has the meaning set forth in Section 9.3.

  • Degradation means a decrease in the useful life of the right-of-way caused by excavation in or disturbance of the right-of-way, resulting in the need to reconstruct such right-of-way earlier than would be required if the excavation or disturbance did not occur.

  • Goods Specification means any specification for the Goods, including any related plans and drawings, as set out in the Order or otherwise agreed in writing by Get Living and the Supplier;

  • Punch List Items means such items (i) as are reasonably necessary or appropriate to fully complete the construction, equipping and furnishing of the Hotel in accordance with this Contract and (ii) that, unless otherwise agreed by Buyer in its sole discretion, (a) individually and in the aggregate do not and will not prohibit, cause a delay in or otherwise adversely affect, under applicable Legal Requirements, the Franchise Agreement or otherwise, the opening of the Hotel for business to the public or the continued occupancy and operation of the Hotel as contemplated under the Brand and (b) may be corrected or completed, subject to delays caused by Force Majeure, within not more than sixty (60) days.

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • CE marking of conformity or ‘CE marking’ means a marking by which the manufacturer indicates that the device is in conformity with the applicable requirements set out in this Regulation and other applicable Union harmonisation legislation providing for its affixing;