Surface Finish definition

Surface Finish. Factory-applied washable vinyl latex paint.
View Source
Surface Finish. Factory-applied washable vinyl latex paint. G. Installation to be per ASTM C636 structural testing. Lateral support for each 96 square feet of ceiling flared at 45 degrees in 4 directions. H. Provide clips for panel uplift restraints at all panels, 2 per panel. GYPSUM WALLBOARD SCOPE: Provide all materials and labor for the installation of Gypsum Wallboard including all accessories and finishes. A. Standard Gypsum Wallboard: ASTM C36; Ends square cut, tapered edges. B. Fire Resistant Gypsum Wallboard: ASTM C36, 518 inches thick Type X. Ends square cut, tapered edges. See Drawings for locations. C. Moisture-resistant gypsum wallboard: ASTM C630-90. D. Joint-reinforcing Tape and Joint Compound: ASTM C475, as manufactured by or recommended by wallboard manufacturer. Minimum 3 coat application for a smooth finish.
View Source

Examples of Surface Finish in a sentence

  • ACI 301 Surface Finish SF-2.0: As-cast concrete texture imparted by form-facing material, arranged in an orderly and symmetrical manner with a minimum of seams.

  • Construct formwork, so concrete members and structures are of size, shape, alignment, elevation, and position indicated, within tolerance limits of ACI 117 (ACI 117M) and to comply with the Surface Finish designations specified in Section 033000 "Cast-In-Place Concrete" for as-cast finishes.

  • Communications/ Pin- Up Board Size: 24-48” W x 30-48”H Surface Finish: Glass, Plastic Base Finish: Metal or Wood Base Type: N/A Foot Type: N/A Plan Location: *not on plans* Special Req.

  • Mobile White Board Size: 24-48” W x 48-72”H Surface Finish: Glass, Plastic Base Finish: Metal or Wood Base Type: Casters Foot Type: Castors, suitable for concrete floor or carpet Plan Location: All Levels M-10.

  • Conference 2 - Round Size: 48-60”D x 30”H Surface Finish: Wood, Metal, Plastic Base Finish: Metal or Wood Base Type: Legs, Pedestals Foot Type: Casters, Pads or Glides, suitable for concrete floor or carpet Plan Location: L2 Open Office Area, L3 Stair Meeting Room Special Req.

  • Conference 1 - Rectangular Size: 72-144”L x 36-60”D x 30”H Surface Finish: Wood, Metal, Plastic Base Finish: Metal or Wood Base Type: Legs, Pedestals Foot Type: Casters, Pads or Glides, suitable for concrete floor or carpet Plan Location: L2 Meeting Rooms in Pods Special Req.

  • Booth Table Size: 60-72”W x 36-48”D x 30”H Surface Finish: Wood, Metal, Plastic Base Finish: Wood or Metal Base Type: Legs, Pedestal Foot Type: Pads or Glides, suitable for concrete floor Plan Location: L1 Intersection TB-5.

  • Modular Credenza Size: 12-84”W x 24-36”H Surface Finish: Wood, Metal, Plastic Base Finish: Metal or Wood Base Type: Legs Foot Type: Pads or Glides, suitable for concrete floor or carpet Plan Location: *not in plans* Special Req.

  • Workstation 2 - 6’x6’ Size: 72”W x 72”D Surface Finish: Wood, Metal, Plastic Base Finish: Metal or Wood Base Type: Legs Foot Type: Pads or Glides, suitable for concrete floor or carpet Plan Location: L2/3, Open Office Areas Special Req.

  • Matrix of tempered martensite with a small amount of undissolved carbides Decarburization: No free ferrit is allowed Total decarburization should not exceed 4 % per plane Mechanical Properties: Tensile strength: 1200-1700 N/mm2, (Standard 1280 +/- 80 N/mm2) Surface Finish: Gray hardened condition.