Station Limits definition

Station Limits means the portion of a railway which is under the control of a Station Master and is situated between the outermost signals of the station or as may be specified by special instructions;
Station Limits means the portion of a railway which is under the control of a Station Master and is situatedPRELIMINARY 10between the outermost signals of the station or as may be specified by special instructions;SR 1.02(52).01.- The demarcation of station limits at the stations shall be as follows :-Section - Signalling arrangementOn Single line - The portion of the railway whichlies between the –
Station Limits means the limit of Metro Railwaysection which is under the administrative control of a Station Shift-in-charge as specified by special instructions;

Examples of Station Limits in a sentence

  • Copy and paste more lines, as necessary, to list estimated areas for each retaining wall.) Structure Number ____________ : Station Limits Area Sta.

  • Reflectorised indicator boards (figure 58) are located 550m from the Station Limits Boards.

  • Station Limits Boards are provided at these stations solely to indicate station limits.

  • At stations where no crossing is to take place and the train is not required to stop for any reason, the Driver shall proceed past the Station Limits Board at the authorised speed.

  • Location of placement (Lane and Station Limits) The tickets shall be available on site for CDOT personnel to inspect.

  • STATION LIMITS BOARDS (1) Station Limits Boards (fig 57) are used to define station limits where fixed signals are not provided.

  • Prepared by: CBIM Form A-8 SITE VALIDATION REPORT(For Irrigation Component)CDD E-05e: Form Date of field visit: Barangay Municipality Name of proposed sub-project: Location: Station Limits (Sitio/Barangay): Name of contact person (PPT/BRT member) No. of present population of the target area: ; Male: Female: Total No. of Households: Ave.

  • STATION LIMITS BOARDS‌ (1) Station Limits Boards (fig 57) are used to define station limits where fixed signals are not provided.

  • Prepared by: CBIM Form A-7 SITE VALIDATION REPORT(For Post-Harvest Facilities)CDD E-05d: Form Date of field visit: Barangay Municipality Name of proposed sub-project: Location: Station Limits (Sitio/Barangay): Name of contact person (PPT/BRT member) No. of present population of the target area: ; Male: Female: Total No. of Households: Ave.

  • Section 01000-Project Special Provisions, 3.2.b.1 does not list that any curb will be under the Stations package, however curb is shown to be removed and replaced within the Station Limits outlined within the plans.


More Definitions of Station Limits

Station Limits means the portion of a railway which is under the control of a
Station Limits means the portion of a railway which is under the control of a Station Master and is situated between the outermost signals of the station or as may be specified by special instructions; SR 1.02 (52) (i) In case of double line stations, station limits should be taken to mean that portion of the track which lies between the outer most signals of the station on each line separately.In case of Single line stations, Station limit means the portion of track which lies between the outermost signals.(ii) In the case of class ‘D’ or flag stations, station limits include all lines and premises within a distance of 400 metres on either side of station building.
Station Limits means the limits or chainages as defined in the station working orders;
Station Limits means the portion of a railway which is under the control of a SM and is situated between the outermost signals in each direction of the station or as may be specified under special instructions;

Related to Station Limits

  • Concentration Limits means, as of any date of determination prior to (x) the Commitment Termination Date with respect to all items below and (y) the Final Maturity Date with respect to the concentration limit set forth in clause (c) below, for purposes of determining the Excess Concentration Amount and the Borrowing Base, the concentration limitations set forth below:

  • Concentration Limit means, at any time, for any Obligor, 2% of the aggregate Outstanding Balance of all Eligible Receivables, or such other amount (a “Special Concentration Limit”) for such Obligor designated by Agent and consented to by each Purchaser; provided, that in the case of an Obligor and any Affiliate of such Obligor, the Concentration Limit shall be calculated as if such Obligor and such Affiliate are one Obligor; and provided, further, that Agent may, upon not less than three Business Days’ notice to Seller, cancel any Special Concentration Limit.

  • Concentration Limitations has the meaning set forth in Schedule 4.

  • emission limit value means the mass, expressed in terms of certain specific parameters, concentration and/or level of an emission, which may not be exceeded during one or more periods of time;

  • Deduction Limitation means the following described limitation on a benefit that may otherwise be distributable pursuant to the provisions of this Plan. Except as otherwise provided, this limitation shall be applied to all distributions that are “subject to the Deduction Limitation” under this Plan. If an Employer determines in good faith prior to a Change in Control that there is a reasonable likelihood that any compensation paid to a Participant for a taxable year of the Employer would not be deductible by the Employer solely by reason of the limitation under Code section 162(m), then to the extent deemed necessary by the Employer to ensure that the entire amount of any distribution to the Participant pursuant to this Plan prior to the Change in Control is deductible, the Employer may defer all or any portion of a distribution under this Plan. Any amounts deferred pursuant to this limitation shall continue to be credited/debited with additional amounts in accordance with Section 3.7 below, even if such amount is being paid out in installments. The amounts so deferred and amounts credited thereon shall be distributed to the Participant or his or her Beneficiary (in the event of the Participant’s death) at the earliest possible date, as determined by the Employer in good faith, on which the deductibility of compensation paid or payable to the Participant for the taxable year of the Employer during which the distribution is made will not be limited by Code section 162(m), or if earlier, the effective date of a Change in Control. Notwithstanding anything to the contrary in this Plan, the Deduction Limitation shall not apply to any distributions made after a Change in Control.

  • Compensation Limit means the compensation limit of Section 401(a)(17) of the Code, as adjusted under Section 401(a)(17)(B) of the Code for increases in the cost of living.

  • Obligor Concentration Limit At any time, in relation to the aggregate Unpaid Balance of Receivables owed by any single Obligor and its Affiliated obligors (if any):

  • Facility Production Limit means the production limit placed on the main product(s) or raw materials used by the Facility that represents the design capacity of the Facility and assists in the definition of the operations approved by the Director.

  • Possession limit as used in s. NR 19.275, means the maximum number of a turtle species or group of turtle species which may be possessed by a person at any time.

  • Plantwide applicability limitation (PAL means an emission limitation expressed in tons per year, for a pollutant at a major stationary source, that is enforceable as a practical matter and established source-wide in accordance with Chapter 19, section 011.

  • Emission limitation means a requirement established by the Board, the director or the Administrator, EPA, which limits the quantity, rate or concentration of emission of air pollutants on a continuous emission reduction including any requirement relating to the operation or maintenance of a source to assure continuous emission reduction (Section 302(k)).

  • Maximum Concentration Level Assessment means the Maximum Concentration Level Assessment for the purposes of a Basic Comprehensive Certificate of Approval, described in the Basic Comprehensive User Guide, prepared by a Toxicologist using currently available toxicological information, that demonstrates that the concentration at any Point of Impingement for a Compound of Concern that does not have a Ministry Point of Impingement Limit is not likely to cause an adverse effect as defined by the EPA. The concentration at Point of Impingement for a Compound of Concern must be calculated in accordance with O. Reg. 419/05.

  • Extension limitation means (a) the lesser of 5% or the

  • Maximum Generation Emergency Alert means an alert issued by the Office of the Interconnection to notify PJM Members, Transmission Owners, resource owners and operators, customers, and regulators that a Maximum Generation Emergency may be declared, for any Operating Day in either, as applicable, the Day-ahead Energy Market or the Real-time Energy Market, for all or any part of such Operating Day. Maximum Run Time:

  • Annual Addition The sum of the following amounts allocated on behalf of a Participant for a Limitation Year, of (i) all Employer contributions; (ii) all forfeitures; and (iii) all Employee contributions. Except to the extent provided in Treasury regulations, Annual Additions include excess contributions described in Code Section 401(k), excess aggregate contributions described in Code Section 401(m) and excess deferrals described in Code Section 402(g), irrespective of whether the plan distributes or forfeits such excess amounts. Annual Additions also include Excess Amounts reapplied to reduce Employer contributions under Section 3.10. Amounts allocated after March 31, 1984, to an individual medical account (as defined in Code Section 415(l)(2)) included as part of a defined benefit plan maintained by the Employer are Annual Additions. Furthermore, Annual Additions include contributions paid or accrued after December 31, 1985, for taxable years ending after December 31, 1985, attributable to post-retirement medical benefits allocated to the separate account of a key employee (as defined in Code Section 419A(d)(3)) under a welfare benefit fund (as defined in Code Section 419(e)) maintained by the Employer.

  • Dose limits means the permissible upper bounds of radiation doses established in accordance with these rules. For purposes of these rules, “limits” is an equivalent term.

  • General Wage Increase means a general wage increase resulting from the formula set out in this LOA and applied as a percentage increase to all wage rates in the collective agreement on the first pay day after the commencement of the eleventh (11th) month in a collective agreement year;

  • Bag limit means the maximum number of game animals, game

  • Plan Limit means the maximum aggregate number of Shares that may be issued for all purposes under the Plan as set forth in Section 5(a) of the Plan.

  • Minimum Balance Requirements You must maintain a minimum daily balance of $2,000.00 in your Money Market Savings account to obtain the disclosed annual percentage yield. We impose a monthly maintenance fee if the balance falls below $500 any day of the month. Basic Checking Account Rate Information: This account does not pay interest.

  • Annual Additions means the sum of the following amounts credited to a Participant for a Limitation Year:

  • Contract Minimum Investment Requirement means, with respect to the Project, investment by the Company and any Sponsor Affiliates of at least $4,000,000 in Economic Development Property subject (non-exempt) to ad valorem taxation (in the absence of this Fee Agreement).

  • Country Limitation Schedule means the schedule published from time to time by Ex-Im Bank setting forth on a country by country basis whether and under what conditions Ex-Im Bank will provide coverage for the financing of export transactions to countries listed therein.

  • Loss Allocation Limitation As defined in Section 4.4(g).

  • Maximum contaminant level (MCL) means the maximum permissible level of a contaminant in water which is delivered to any user of a public water system.

  • Automatic Location Identification Gateway or "ALI Gateway" is a computer facility into which CLEC delivers Automatic Location Identification (ALI) data for CLEC Customers. Access to the ALI Gateway will be via a dial-up modem using a common protocol. "Automatic Number Identification" or "ANI" is the Billing telephone number associated with the access line from which a call originates. ANI and Calling Party Number (CPN) usually are the same number. "Automatic Route Selection" or "ARS" is a service feature that provides for automatic selection of the least expensive or most appropriate transmission facility for each call based on criteria programmed into a circuit Switch routing table or system.