State of the art technology definition

State of the art technology means up-to-date technology reflected in equipment or procedures that, when applied at a major facility, will result in a significant reduction in the probability of a discharge. The technology represents an advancement in reduction of leaks or discharges and shall have been demonstrated at a similar facility to be reliable in commercial operation or in a pilot operation on a scale large enough to be translated into commercial operation. The technology shall be in the public domain at reasonable cost commensurate with the reduction in probability of leaks or discharges achieved, or otherwise available at reasonable cost commensurate with the reduction in probability of leaks or discharges achieved. Technologies verified by the New Jersey Corporation for Advanced Technology (NJCAT) as innovative environmental technologies are deemed to meet this definition. Information on verified technologies shall be available from the Department through the Office of Innovative Technology and Market Development within the Division of Science and Research.
State of the art technology or “leading edge technology” means the highest level of
State of the art technology or “leading-edge technology” means the highest level of development, as of a device, technique, or scientific field achieved at a particular time: Provided, That the technology was not in commercial use anywhere in the United States before July 1, 2021.

Examples of State of the art technology in a sentence

  • State of the art – State of the art technology and organisation measures should be used, where possible, however this needs to be balanced against reasonable costs.

  • State of the art technology and equipment provided under the project enabled rapid increase in gas production; annual production rose from around 7.0 billion cubic meters in 1994 to around 8.7 billion cubic meters per year by 2002.

  • The products designed are based on State of the art technology, to provide optimum effect as required by the Defence Forces at the most competitive price.

  • State of the art technology (software, hardware, buoys, multi-beam sonar, boats, emergency response equipment) was acquired for PNA, SHN, and local governments.

  • State of the art technology shall be incorporated in the design and development of the system.

  • In this case, the declassification instructions for the document could be written as: “Declassify on 25X4, 31 December 2019” or “Declassify On: 25X – State of the art technology within the U.S., weapon system, 31 December 2019”.b.

  • State of the art technology is employed to protect data from unauthorized access.

  • State of the art technology and techniques for both attackers and defenders change constantly.

  • State of the art technology mapping tools ensure that the Dmin is about 80% of Dmax [51].

  • State of the art technology like IGCC (Integrated gasification combined cycle) is being planned for Thar coal deposit.


More Definitions of State of the art technology

State of the art technology means, that the installation allows the recovery ofcontrolled substances” as wel l as the removal of Cyclopentane and fulfils the requirements according to chapter 4.

Related to State of the art technology

  • New Technology means any invention, discovery, improvement, or innovation that was not available to the District on the effective date of the contract, whether or not patentable, including, but not limited to, new processes, emerging technology, machines, and improvements to or new applications of existing processes, machines, manufactures and software. Also included are new computer programs, and improvements to, or new applications of, existing computer programs, whether or not copyrightable and any new process, machine, including software, and improvements to, or new applications of, existing processes, machines, manufactures and software.

  • Licensee Technology means the Licensee Know-How and Licensee Patents.

  • Company Technology means all Technology used in or necessary for the conduct of the business of the Company or any of its Subsidiaries, or owned or held for use by the Company or any of its Subsidiaries.

  • Manufacturing Technology means any and all patents, patent applications, Know-How, and all intellectual property rights associated therewith, and including all tangible embodiments thereof, that are necessary or useful for the manufacture of adeno- associated viruses, adeno-associated virus vectors, research or commercial reagents related thereto, Licensed Products, or other products, including manufacturing processes, technical information relating to the methods of manufacture, protocols, standard operating procedures, batch records, assays, formulations, quality control data, specifications, scale up, any and all improvements, modifications, and changes thereto, and any and all activities associated with such manufacture. Any and all chemistry, manufacturing, and controls (CMC), drug master files (DMFs), or similar materials provided to regulatory authorities and the information contained therein are deemed Manufacturing Technology.

  • Product Technology means the Product Know-How and Product Patents.

  • Joint Technology means Joint Know-How and Joint Patents.

  • Qualified high-technology business means a business that is either of the following:

  • Clean coal technology means any technology, including technologies applied at the precombustion, combustion, or post combustion stage, at a new or existing facility which will achieve significant reductions in air emissions of sulfur dioxide or oxides of nitrogen associated with the utilization of coal in the generation of electricity, or process steam which was not in widespread use as of November 15, 1990.

  • Sexual exploitation means any actual or attempted abuse of a position of vulnerability, differential power, or trust for sexual purposes. It includes profiting monetarily, socially, or politically from sexual exploitation of another.

  • Nuclear medicine technologist means an individual who holds a current certification with the American Registry of Radiological Technologists or the Nuclear Medicine Technology Certification Board.

  • Proprietary Technology means the technical innovations that are unique and

  • General anesthesia means a drug-induced loss of consciousness during which patients are not arousable, even by painful stimulation. The ability to independently maintain ventilatory function is often impaired. Patients often require assistance in maintaining a patent airway, and positive pressure ventilation may be required because of depressed spontaneous ventilation or drug-induced depression of neuromuscular function. Cardiovascular function may be impaired.

  • Technology means any and all technical information and/or materials, including, without limitation, ideas, techniques, designs, sketches, drawings, models, inventions, know-how, processes, apparatus, methods, equipment, algorithms, software programs, data, software source documents, other works of authorship, formulae and information concerning engineering, research, experimental work, development, design details and specifications.

  • Background Technology means all Software, data, know-how, ideas, methodologies, specifications, and other technology in which Contractor owns such Intellectual Property Rights as are necessary for Contractor to grant the rights and licenses set forth in Section 14.1, and for the State (including its licensees, successors and assigns) to exercise such rights and licenses, without violating any right of any Third Party or any Law or incurring any payment obligation to any Third Party. Background Technology must: (a) be identified as Background Technology in the Statement of Work; and (b) have been developed or otherwise acquired by Contractor prior to the date of the Statement of Work, or have been developed by Contractor outside of its performance under the Statement of Work. Background Technology will also include any general consulting tool or methodology created by Contractor, which will not be required to be identified in the Statement of Work.

  • Assistive technology means the devices, aids, controls, supplies, or appliances described in OAR 411-300-0150 that are purchased to provide support for a child and replace the need for direct interventions to enable self-direction of care and maximize independence of the child.

  • Practice of radiologic technology means the application of x-rays to human beings for diagnostic or

  • Professional Technologist means a person holding registration as Professional Engineering Technologist in terms of the Engineering Profession Act, 2000.

  • Licensor Technology means the Licensor Patents and the Licensor Know-How.

  • Developed Technology means any Technology including, without limitation, any enhancements, substitutions or improvements to the Core Technology that is (a) discovered, developed or otherwise acquired by DURA pursuant to the terms of the Development Agreement or (b) otherwise acquired by or on behalf of Xxxxxx Corp. II during the term of the Development Agreement.

  • Hemp products means all products made from industrial hemp,

  • Project IP means any Intellectual Property created, invented or discovered in carrying out the Project including in respect of the Project Results but does not include Background IP or copyright in a Student’s thesis or other material produced by him/her for the purpose of assessment towards his/her degree.

  • Practice of medicine or osteopathic medicine means the prevention, diagnosis and treatment of

  • High-technology activity means that term as defined in section 3 of the Michigan economic growth authority act, 1995 PA 24, MCL 207.803.

  • Medical management technique means a practice which is used to control the cost or utilization of health care services or prescription drug use. The term includes, without limitation, the use of step therapy, prior authorization or categorizing drugs and devices based on cost, type or method of administration.

  • SAP Technology Solution(s means SAP NetWeaver Foundation for Third Party Applications, SAP Business Technology Platform (excluding when used solely as a Connectivity App between an SAP Application and ERP), SAP Signavio Solutions and SAP Process Insights (including any renamed, prior and/or successor versions of any of the foregoing made generally available by SAP if any but excluding when any of the foregoing are used as a User Interface for ERP.

  • Licensed Technology means the Licensed Patents and the Licensed Know-How.