Standby capacity definition

Standby capacity means the maximum daily volumetric amount of capacity reserved in the utility's system for use by a transportation customer, if the customer purchased optional standby service.
Sample 1Sample 2Sample 3

Examples of Standby capacity in a sentence

  • Standby capacity needs to be put in place across WHO and its partners, including Global Outbreak Alert and Response Network (GOARN), and there should be pre-agreed arrangements for foreign medical teams.

  • Standby capacity is subject to the Utility’s review and may be increased or decreased at the sole discretion of the Utility based on changes in the customer’s maximum demand.

  • The total Standby capacity requirements for which the Company will be providing Standby power and to which the Standby Service reservation rate applies as well as the expected level of standard service the customer will take, even if the standard service level is expected to be zero.

  • Standby capacity service shall not be subject to the provision requiring the application of 60% of the highest on-peak billing demand of the preceding billing months of June through September.

  • The usage fee is applied to the smaller of the following: (1) the amount of contracted Standby capacity less the actual demand supplied by the customer’s own generating facilities, but not less than zero, or (2) the amount of actual capacity supplied by the Company.

  • Standby capacity could be fossil fuelled or stored hydropower capacity.

  • Company will require customer to revise the Electric Service Agreement to contract for additional Standby capacity if the customer exceeds the contract amount in any three of the preceding twelve months.

  • The Supplemental Capacity for which the customer has contracted less generation output above the Standby capacity for which the customer has contracted (as defined in the Standby Service Rider), but not less than zero.(Continued on Sheet No. 5-110)Date Filed: 06-30-97 By: James M.

  • Standby capacity should be equated to captive capacity or OA capacity contracted by the OA consumer.

  • The total Standby capacity requirements for which the Company will be providing Standby power and to which the Standby Service reservation rate applies as well as the expected level of standard service the customer will take, even if the standard service level is expected to be zero, 3.

Related to Standby capacity

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Additional Capacity means, in relation to the Network, the capability of the Network to carry additional task by an enhancement or improvement of the infrastructure forming part of the Network or Associated Facilities;

  • firm capacity means Natural Gas transmission Capacity contractually guaranteed as uninterruptible by the TSO according to this Agreement.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Available RP Capacity Amount means (i) the amount of Restricted Payments that may be made at the time of determination pursuant to Sections 7.06(d), (g), (h) and (l) minus (ii) the sum of the amount of the Available RP Capacity Amount utilized by the Borrower or any Restricted Subsidiary to (A) make Restricted Payments in reliance on Sections 7.06 (g), (h) or (l), (B) incur Liens pursuant to Section 7.01(bb), (C) make Investments pursuant to Section 7.02(n), (D) incur Indebtedness pursuant to Section 7.03(y) and (E) make prepayments, redemptions, purchases, defeasances and other payments in respect of Junior Financings prior to their scheduled maturity utilizing the Available RP Capacity Amount pursuant to Section 7.13 plus (iii) the aggregate principal amount of Indebtedness prepaid prior to or substantially concurrently at such time, solely to the extent such Indebtedness (A) was secured by Liens pursuant to Section 7.01(bb) or (B) was incurred pursuant to Section 7.03(y) and not secured pursuant to Section 7.01(bb) (it being understood that the amount under this clause (iii) shall only be available for use under Sections 7.01(bb) and/or 7.03(y), as applicable).

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;