Spray Buffing definition

Spray Buffing. A process used to eliminate heel marks, scuffs in high traffic areas and to restore the hard surface floor to a uniform appearance using a floor machine and soft buffing pad. Sweeping or dust mopping and damp mopping must occur before this procedure is done. Carpet Cleaning: Shampooing carpets with the deep dirt extraction (steam cleaning) method per manufactures recommendations. Dust Mopping: Removing dirt and debris from floor surfaces by use of a dust mop. Easily Movable Items: Any furniture, waste receptacles, chairs, etc., that weigh 50 pounds or less or can be moved by one person. Emergency Clean-ups: Cleaning up water from roof leaks and plumbing leaks. Floor Maintenance: The tasks of sweeping, dust mopping, damp mopping, wet mopping, scrubbing, stripping, sealing, waxing, dry buffing or spray buffing to maintain floors in a neat, clean, orderly and safe state. Glass: All exposed glass or glass surfaces that are not considered windows, including all Lucite, plastic or any transparent materials, including mirrors and entrance doors. High Glass: Glass walls, elevators and partitions with lower edge or upper edge that is at least six feet above the ground. Neat/Clean: Orderly, tidy and free from dirt, stains, dust and debris. Professional: Conforming to the technical or ethical standards of a profession; displaying the conduct, appearance and qualities that characterize or xxxx a profession; possessing skill, experience and competence in a profession. Scrubbing (hard surface floors): Cleaning floor surfaces, after sweeping or dust mopping, applying an all purpose detergent with a mop and then agitating the detergent with a floor scrubber or slow buffing machine, followed by using a mop to rinse the area two or more times with clean water, picking-up residue with a wet-vacuum. Sealing (hard surface floors): After stripping and using a neutral cleaner, two coats of sealant are applied to protect and seal the floor surface. Showers Dressing Rooms (Sheriffs Locker Room) Showers are located in the Sheriffs area only. Spray Buffing (hard surface floors): A process used to clean, eliminate heal marks, scuffs in high traffic areas using a buffing pad, floor machine and spray buffing chemical, leaving a uniform thin coat of non-skid wax. Sweeping or dust mopping and damp mopping must occur before this procedure is done. Stairways/Stairwell/Staircase: One or more flights of stairs, including the steps, risers and landings to pass from one level to another, a fli...
Sample 1Sample 2Sample 3
Spray Buffing. A process used to eliminate heel marks, scuffs in high traffic areas and to restore the hard surface floor to a uniform appearance using a floor machine and soft buffing pad. Sweeping or dust mopping and damp mopping must occur before this procedure.
Sample 1Sample 2Sample 3
Spray Buffing means spraying on a clean resilient floor in an evenly distributed manner, a spray cleaning and/or buffing solution, using a floor machine and an abrasion pad to clean off black marks and scuffing, and to polish the surface. Care must be taken out to spray solution on baseboards or furniture. Dry mopping to remove fine dust generated during the former process follows spray buffing.
Sample 1Sample 2

Examples of Spray Buffing in a sentence

  • Damp Mopping and Spray Buffing: Floors shall be free of streaks, mop strands marks and skipped areas.

  • QUALITY CONTROL REQUIRED: Damp Mopping and Spray Buffing: Floor shall be free of streaks, mop strand marks, and skipped areas.

  • QUALITY CONTROL REQUIRED: Damp mopping and Spray Buffing: Floors shall be free of streaks, mop strand marks, and skipped areas.

  • Chromium-plated, stainless steel and brass shall be polished with a dry cloth or textile disposable wipers.▪ Spray Buffing Standards (Hard Surfaced Floors): Spray buff all lobbies, corridors, and conference rooms, Spray buff product to be of the same manufacturer as floor finish.

  • Damp Mopping and Spray Buffing: Floors shall be free of streaks, mop strand marks and skipped areas.

  • Spray Buffing: A buffing machine shall be used with a synthetic spray buffer pad attached thereto, and the surface shall be buffed only enough to harden the finish and bring the surface to desire uniform luster.

  • Corners and edges or grout are noticeably soiled.3. Baseboards: Dusty, fuzzy or soiled on top/bottom edge, Adhered dirt, Grey from shampoos, strippers or wax.4. Spray Buffing: Uneven surfaces, Dull appearance.

  • Damp Mopping and Spray Buffing: Floors shall be free of streaks, mop- strand marks and skipped areas.

  • Damp Mopping and Spray Buffing: Floors shall be free of streaks, mop-strand marks and skipped areas.

  • Damp Mopping and Spray Buffing: Floors shall be slip resistant, free of marks, skipped areas, streaks, and mop strands.

Related to Spray Buffing

  • Spray buff product means a product designed to restore a worn floor finish in conjunction with a floor buffing machine and special pad.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • JetBrains or “We” means JetBrains s.r.o., having its principal place of business at Xx Xxxxxxxxx XX 0000/00, Xxxxxx, 00000, Xxxxx Xxxxxxxx, registered in the Commercial Register maintained by the Xxxxxxxxx Xxxxx xx Xxxxxx, Xxxxxxx X, Xxxx 00000, ID. No.: 265 02 275.

  • Cream means cream obtained directly and exclusively from milk.

  • E-cigarette means any electronic oral device, such as one composed of a heating element and battery or electronic circuit, or both, which provides a vapor of nicotine or any other substances, and the use or inhalation of which simulates smoking. The term shall include any such device, whether manufactured, distributed, marketed, or sold as an e-cigarette, e-cigar, and e-pipe or under any other product, name, or descriptor.

  • Grinding means to reduce to powder or small fragments and includes mechanical chipping or drilling.

  • Snack means supplemental food served between meals.

  • Asphalt means a dark brown to black cement-like material (solid, semisolid, or liquid in consistency) in which the predominating constituents are bitumens which occur in nature as such or which are obtained as residue in refining petroleum.

  • Epinephrine auto-injector means a device for immediate self-administration or administration by another trained person of a measured dose of epinephrine to a person at risk of anaphylaxis.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Crawling bug insecticide means any insecticide product that is designed for use against ants, cockroaches, or other household crawling arthropods, including, but not limited to, mites, silverfish or spiders. “Crawling Bug Insecticide” does not include products designed to be used exclusively on humans or animals, or any house dust mite product. For the purposes of this definition only:

  • Massage therapy means performance for compensation of massage, myotherapy, massotherapy, bodywork, bodywork therapy, or therapeutic massage including hydrotherapy, superficial hot and cold applications, vibration and topical applications, or other therapy which involves manipulation of the muscle and connective tissue of the body, excluding osseous tissue, to treat the muscle tonus system for the purpose of enhancing health, providing muscle relaxation, increasing range of motion, reducing stress, relieving pain, or improving circulation.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • HDPE means high density polyethylene;

  • Brachytherapy means a method of radiation therapy in which sealed sources are utilized to deliver a radiation dose at a distance of up to a few centimeters, by surface, intracavitary, or interstitial application.

  • Wine means a product manufactured by the normal alcoholic fermentation of the juice of sound, ripe grapes, or any other fruit with the usual cellar treatment, and containing not more than 21% of alcohol by volume, including cider made from apples or pears, or both, that contains at least 1/2 of 1% of alcohol by volume, or mead or honey wine made from honey, fermented fruit juices other than grapes, and mixed wine drinks.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • Riprap means small, broken stones or boulders placed compactly or irregularly on dykes or similar embankments for protection of earth surfaces against wave action or current;

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Chimney means a construction by means of which a flue is formed for the purpose of carrying products of combustion to the open air and includes a chimney stack and the flue pipe.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Brachytherapy source means a radioactive source or a manufacturer-assembled source train or a combination of these sources that is designed to deliver a therapeutic dose within a distance of a few centimeters.

  • Pushcart means a non-self-propelled vehicle limited to serving non-potentially hazardous foods or commissary-wrapped food maintained at proper temperatures, or limited to the preparation and serving of frankfurters.