Examples of Spigot in a sentence
Bell & Spigot Pipe - rubber gaskets meeting requirements of ASTM C 564-88, "Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings".
Spigot ends shall be marked as necessary to indicate the point of complete closure.
The P.V.C. (S.W.R.) and P.V.C. (Rigid), soil Waste & Vant Pipes (Spigot & Socket, & couples joints), shall be of make & brand as specified (Under Specification of materials) confirming to I.S.S., B.S.S. & DIN are tube used.The main specification of P.V.C. Soil & Waste pipes and fittings are as below.
Spigot ends shall be examined with particular care since they are vulnerable to damage from handling.
Single Gasket Bell and Spigot Fused Coupling System - Couplers shall be submitted as attached part of 10-ft specimen and a second piece of the specimen, minimum of 12 inches in length, with gasket installed shall be included with the sample.
Spigot and socket flexible joints shall be of the push-fit type with gaskets of ethylene propylene rubber (EPDM).
In the case of S.W. Pipe joints (socket and Spigot), they should be caulked first with tarred jute (spun) of required diameter, almost quarter depth of the socket, after which cement mortar 1:3 is pushed in with wooden chisel and finishing beveled at outside at 450.
Spigot ends shall be examined with particular care as this area is the most vulnerable to damage from handling.
Smoke shall be pumped to the drains from the lower end from a smoke machine, which consists of lower, and burner.(e) P.V.C (S.W.R.) & P.V.C. (Rigid) Pipes & Fittings9.01 The P.V.C. (S.W.R.) and P.V.C. (Rigid), soil Waste & Vant Pipes (Spigot & Socket, & couples joints), shall be of make & brand as specified (Under Specification of materials) confirming to I.S.S., B.S.S. & DIN are tube used.The main specification of P.V.C. Soil & Waste pipes and fitting are as below.
Spigot end of pipe shall be entered into socket with care used to keep joint from contacting ground.