Speed category definition

Speed category means the maximum speed which the tyre can sustain, expressed by speed category symbol (see table below).
Speed category means the maximum designated speed of the tyre, expressed by the speed category symbol as shown in the Table 2.
Speed category means the maximum speed which the tyre can sustain, expressed by means of a letter code speed symbol (See Appendix 1 to this section);

Examples of Speed category in a sentence

  • The minimum recommended spacing distances between signs in the advance warning area are shown in Table 1.Table 1: Recommended Advance Warning Sign Minimum Spacing * Speed category to be determined by the highway agency** The column headings A, B, and C are dimensions.

  • Speed category Diagonal (bias-ply) tyres Radial/Run flat system Bias-belted tyres Ply rating Standard Reinforced Standard 4 6 8 L, M, N 2.3 2.7 3.0 2.4 2.8 - P, Q, R, S 2.6 3.0 3.3 2.6 3.0 2.6 T, U, H 2.8 3.2 3.5 2.8 3.2 2.8 V W Y 3.0 - - 3.4 - - 3.7 - - 3.0 3.2 3.2 1/ 3.4 3.6 3.6 - - - 1.3. The manufacturer may request, giving reasons, the use of a test‑inflation pressure differing from those given under paragraph 1.2. above.

  • The assessment is based on the minimum requirements for the Aircraft Approach Speed category specified in Table 2, “Aerodrome Physical Characteristics”, attached.

  • The two subcategories set forth below will be allocated one half each of the total points available within this broader Relative Speed category.

  • Tire load capacity index(single/double)/ Speed category symbol (second row) 3.

  • Recommended Advance Warning Sign Minimum SpacingRoad TypeDistance Between Signs*** Speed category to be determined by the highway agency** The column headings A, B, and C are the dimensions shown in Figures 6H- 1 through 6H-46.

  • Speed category symbol "Q" or below (not including "H") or "R" and above (including "H") in case of "snow" tyres for approval with regard to adhesion on wet surfaces; For Class C2 and C3 tyres, state whether: (a) M+S marked in case of approval with regard to rolling sound emission level at stage 1.

  • As Paragraph1.2.3 herein shows, on a road with a Design Speed of V kph the mean speed of some vehicles may be as low as V/2; therefore where the upper limit of superelevation is used, the slowest vehicles on the slowest roads in a Design Speed category may actually experience “negative” centrifugal acceleration.

  • The change to Aircraft Approach Speed category also provides the possibility of having a higher minima, in some situations, for the speed C and D categories where the obstacle environment may only be compatible with speed categories A and B for the lower non-precision minima’s.

  • Summarized description: 54.1. Size of tyre: 54.2. Category of use: 4.3. Structure: diagonal or bias-ply/bias belted/radial2 5.3. Structure: diagonal (bias-ply)/bias belted/radial2 54.4. Speed category symbol: 54.5. Load-capacity index: 54.5.1. For traction (implement only): 54.5.2. For trailer (implement only): 54.6. Whether the tyre is to be fitted with or without an inner tube 54.7. The supplementary service description, if applicable: 65.

Related to Speed category

  • Clinical categories means the groups into which hospital treatments are categorised by type, e.g., brain and nervous system, kidney and bladder, and digestive system. At the time of writing there were 38 categories in the Medicare clinical categories system.

  • Transaction Category means the particular type of repurchase transaction effected hereunder, as determined with reference to the term of the transaction and the categories of Securities that constitute Eligible Securities therefor, which term shall include FICASH I Transactions, FICASH II Transactions, FICASH III Transactions, FITERM I Transactions, FITERM II Transactions, FITERM III Transactions, and such other transaction categories as may from time to time be designated by the Funds by notice to Seller, Custodian and Repo Custodian.

  • Rating Category means one of the generic rating categories of any Rating Agency without regard to any refinement or gradation of such rating by a numerical modifier or otherwise.

  • Product Category means the applicable category which best describes the product as listed in this Section 94508.

  • Issue Type Category means, with respect to a Municipal Obligation acquired by the Fund, for purposes of calculating S&P Eligible Assets as of any Valuation Date, one of the following categories into which such Municipal Obligation falls based upon a good faith determination by the Fund: health care issues (including issues related to teaching and non-teaching hospitals, public or private); housing issues (including issues related to single- and multi-family housing projects); educational facilities issues (including issues related to public and private schools); student loan issues; transportation issues (including issues related to mass transit, airports and highways); industrial development bond issues (including issues related to pollution control facilities); public power utilities issues (including issues related to the provision of electricity, either singly or in combination with the provision of other utilities, and issues related only to the provision of gas); water and sewer utilities issues (including issues related to the provision of water and sewers as well as combination utilities not falling within the public power utilities category); special utilities issues (including issues related to resource recovery, solid waste and irrigation as well as other utility issues not falling within the public power and water and sewer utilities categories); general obligation issues; lease obligations (including certificates of participation); Escrowed Bonds; and other issues (“Other Issues”) not falling within one of the aforementioned categories. The general obligation issue category includes any issuer that is directly or indirectly guaranteed by the State or its political subdivisions. Utility issuers are included in the general obligation issue category if the issuer is directly or indirectly guaranteed by the State or its political subdivisions. Municipal obligations in the utility issuer category will be classified within one of the three following sub-categories: (i) electric, gas and combination issues (if the combination issue includes an electric issue); (ii) water and sewer utilities and combination issues (if the combination issues does not include an electric issue); and (iii) irrigation, resource recovery, solid waste and other utilities, provided that Municipal Obligations included in this sub-category (iii) must be rated by S&P in order to be included in S&P Eligible Assets. Municipal Obligations in the transportation issue category will be classified within one of the two following sub-categories: (i) streets and highways, toll roads, bridges and tunnels, airports and multi-purpose port authorities (multiple revenue streams generated by toll roads, airports, real estate, bridges); (ii) mass transit, parking seaports and others.

  • eligible Category means Category (1) set forth in the table in paragraph 1 of Schedule 1 to this Agreement;

  • Price Category means the price category and associated eligibility criteria referred to in Schedule 7 that determine the Price(s) that apply to an ICP;

  • Special Category Data means any personal data revealing racial or ethnic origin, political opinions, religious or philosophical beliefs, or trade union membership, and the processing of genetic data, biometric data for the purpose of uniquely identifying a natural person, data concerning health or data concerning a natural person's sex life or sexual orientation.

  • Category 3 means those affected lands and support facilities if those lands supported operations which were not completed or substantially completed prior to July 1, 1973 (the effective date of the Wyoming Environmental Quality Act) and any affected lands or support facilities taken out of use on or after July 1, 1973 and before May 25, 1975 (the effective date of the Division’s 1975 Rules and Regulations).

  • eligible Categories means Categories (1), (2) and (3) set forth in the table in paragraph 1 of Schedule 1 to this Agreement;

  • Category 2 Training: This category includes services related to training state employees to understand and apply Agile concepts and tools.

  • Category A means the relevant information which shall be included in the base prospectus. This information cannot be left in blank for later insertion in the final terms;

  • Highest Rating Category means, with respect to an Eligible Investment, that the Eligible Investment is rated by S&P or Moody’s in the highest rating given by that rating agency for that general category of security. By way of example, the Highest Rating Category for tax-exempt municipal debt established by S&P is “A-1+” for debt with a term of one year or less and “AAA” for a term greater than one year, with corresponding ratings by Moody’s of “MIG-1” (for fixed rate) or “VMIG-1” (for variable rate) for three months or less and “Aaa” for greater than three months. If at any time (a) the Bonds are not rated, (b) both S&P and Moody’s rate an Eligible Investment and (c) one of those ratings is below the Highest Rating Category, then such Eligible Investment will, nevertheless, be deemed to be rated in the Highest Rating Category if the lower rating is no more than one rating category below the highest rating category of that rating agency. For example, an Investment rated “AAA” by S&P and “Aa3” by Xxxxx’x is rated in the Highest Rating Category. If, however, the lower rating is more than one full rating category below the Highest Rating Category of that rating agency, then the Eligible Investment will be deemed to be rated below the Highest Rating Category. For example, an Eligible Investment rated “AAA” by S&P and “A1” by Xxxxx’x is not rated in the Highest Rating Category.

  • Category B means that the base prospectus shall include all the general principles related to the information required, and only the details which are unknown at the time of the approval of the base prospectus can be left in blank for later insertion in the final terms;

  • Obligation Category means Payment, Borrowed Money, Bond, Loan, or Bond or Loan, only one of which shall be specified in the Standard, and:

  • Category 1 means medical education activities that have been designated as Category 1 by the Accreditation Council for Continuing Medical Education (ACCME), the American Osteopathic Association (AOA), a state medical society, or an equivalent organization.

  • Working level month (WLM) means an exposure to 1 working level for 170 hours (2,000 working hours per year divided by 12 months per year is approximately equal to 170 hours per month).

  • Category 4 Data is data that is confidential and requires special handling due to statutes or regulations that require especially strict protection of the data and from which especially serious consequences may arise in the event of any compromise of such data. Data classified as Category 4 includes but is not limited to data protected by: the Health Insurance Portability and Accountability Act (HIPAA), Pub. L. 104-191 as amended by the Health Information Technology for Economic and Clinical Health Act of 2009 (HITECH), 45 CFR Parts 160 and 164; the Family Educational Rights and Privacy Act (FERPA), 20 U.S.C. §1232g; 34 CFR Part 99; Internal Revenue Service Publication 1075 (xxxxx://xxx.xxx.xxx/pub/irs-pdf/p1075.pdf); Substance Abuse and Mental Health Services Administration regulations on Confidentiality of Alcohol and Drug Abuse Patient Records, 42 CFR Part 2; and/or Criminal Justice Information Services, 28 CFR Part 20.

  • Finished grade means the grade upon completion of the fill or excavation.

  • Ordering Catalog means the electronic listing of items and their corresponding Contract unit prices available for ordering under this contract.

  • Licensed Level means a) when referenced in the context of a Named User, the quantity of Metric for which each individual Named User category and type is licensed -and- b) when referenced in the context of a Package, the quantity of Metric for which each individual Package is licensed; and

  • Category means a category set forth in the table in Section IV of Schedule 2 to this Agreement.

  • Usage Metric means the standard of measurement for determining the permitted use and calculating the fees due for a Cloud Service as set forth in an Order Form.

  • Digital Signal Level 3 (DS-3 means the 44.736 Mbps third level signal in the time division multiplex hierarchy.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Grade point average or "GPA" means the grade point average earned by an eligible student and reported by the high school or participating institution in which the student was enrolled based on a scale of 4.0 or its equivalent if the high school or participating institution that the student attends does not use the 4.0 grade scale;