Solder definition

Solder means any metal in which the sum of the lead and the tin is greater than 50 percent by weight and which is used for the purpose of joining two metals or of joining a metal to any other material.
View Source
Solder means lead-free solder among others.) In this case, the spacing Δ between the two focused beam spots can be varied from 0.55 to 1.1 mm. If the spacing Δ is adjustable in as wide a rangeas mentioned above, the laser processing apparatus can be effectively used for laser welding of parts onto a printed circuit board. If it is desirable to further widen the spacing Δ between the beam spots, the distance Zmax from the diffractive optical element 4 to the workpiece’s surface 7A needs to be elongated. On the other hand, if the spacing Δ between the beam spots is desired to be narrowed,
View Source
Solder means Debtor Solder Station-One, Inc., a California corporation.
View Source

Examples of Solder in a sentence

  • Solder or flux which contains more than 0.2 percent lead can not be used for the installation or repair of plumbing at any connection which provides water for human use.

  • The plating on the contacts is specified as follows: • Contact area: 0.38 micrometers minimum hard gold over 2.54 micrometers minimum thick nickel • Solder terminal area: gold flash or 2.54 micrometers tin lead plating over 2.54 minimum thick nickel.

  • Furthermore, it was agreed to rename these positions as Outer Layer Prep and Solder Mask Prep respectively.

  • TITLE: Solder Stress testing ▇▇▇▇.▇▇.▇▇▇▇▇-▇▇▇ ▇▇▇▇▇▇▇ Solder Stress test: -------------------------- .

  • Drie Nicolaaskerken in Amsterdam: de Oude Kerk, Ons’Lieve Heer op Solder, de Sint Nicolaaskerk, Amsterdam 1988, p.

  • Solder shall not be used as a mechanical fastening device on any part of the fixture joints shall be welded and ground smooth.

  • Drie Nicolaaskerken in Amsterdam: de Oude Kerk, Ons’Lieve Heer op Solder, de Sint Nicolaaskerk, Amsterdam 1988.

  • Relevant Academic Degree, at least 5 years experience in manufacturing in SMT, Solder Wave and Assembly lines, Knowledge in providing and infrastructure of ISO 9001, ISO 14001, OHSAS 18001, at least 5 years of experience as QE.

  • Typical NRE costs include: Tooling Stencils Solder wave selective pallets Special Fixtures In-Circuit Test Fixtures Functional Test Equipment Engineering and/or Manufacturing Design Services Other XT250 or EDXRD technology Product pricing beyond the 480 units shall be subject to requote by Supplier and mutual negotiation.

  • Test coupons, Solder ability samples, micro section analysis reports and inspection reports shall be stored and retrievable for six years.