Size factor definition

Size factor means the sum of the section width (on its measuring rim) and the outer diameter of a tire.
Sample 1
Size factor means the effective height of the dam, expressed in feet, multiplied by the effective storage of the reservoir, expressed in acre-feet.(yy) “Stilling basin” means an open structure or excavation at the outlet of a spillway that dissipates the energy of fast-moving water being discharged from the spillway to protect the streambed below a dam from erosion.
Sample 1
Size factor means the sum o f the section width and the outer diameter of a tire determined on the test rim.
Sample 1

Examples of Size factor in a sentence

  • A4.9 Size factor component Guidance The effect of the size factor component is to provide a relatively higher capital requirement in respect of Insurers with smaller portfolios of Invested Assets.

  • A4.9 Size factor component GuidanceThe effect of the size factor component is to provide a relatively higher capital requirement in respect of Insurers with smaller portfolios of Invested Assets.

  • Size factor loadings also increase significantly with retail shorting, with highly shorted stocks having 0.335 higher exposures to the small stock factor than stocks without shorting.

  • The notch sensitivity factor at the fillet can be taken as 0.85 and expected reliability is 90%.Surface finish factor = 0.79 Size factor = 0.85 Reliability factor = 0.897Theoretical stress concentration factor = 1.33Determine the diameter ‘d’ for a life of 10000 cycles.

  • The planet is located with a “center of brightness” algorithm and its size determined with photometric cuts in the vertical and horizontal directions.- Size factor: This option controls the size of the ROI around the planet.

  • The p-value associated with the Size factor is 0.02, which is lower than 0.05.

  • The property Size factor - reflecting room count - calls for a +2% performance adjustment for this property, or 102% (1.02).

  • We consider the following simple choice of α: if k is the number of buckets then:αj =2|k/2∫sign|.j − k+1 .| .k + 1 Σ2 j −(4.1)For example, the Size factor with two buckets uses α = [−1, 1], goes short on the stocks with lower measures of size (i.e. upper half by market capitalization), long in the other half, and equal weight stocks within each bucket.

  • Table 11 : Values of relative surface factor YRrel T Type of steel 2.5.12 Size factor YXThe size factor YX takes into account the decrease of the strength with increasing size.

  • While statistically significant at the 5% level of its value was only one company.On average with an increase of debt ratio in capital structure by 0,05, there follows a decrease of share price by 85$, while increase of Size factor by 0,1 leads to an increase in share price by 40$.

Related to Size factor

  • Weighting factor wT for an organ or tissue (T) means the proportion of the risk of stochastic effects resulting from irradiation of that organ or tissue to the total risk of stochastic effects when the whole body is irradiated uniformly. For calculating the effective dose equivalent, the values of wT are:

  • Note Factor means, with respect to the Notes or any Class of Notes on any Payment Date, a six-digit decimal figure equal to the Note Balance of the Notes or such Class of Notes, as applicable, as of the end of the preceding Collection Period divided by the Note Balance of the Notes or such Class of Notes, as applicable, as of the Closing Date. The Note Factor will be 1.000000 as of the Closing Date; thereafter, the Note Factor will decline to reflect reductions in the Note Balance of the Notes or such Class of Notes, as applicable.

  • Load Factor means the percentage of aircraft seats actually occupied on a flight (RPMs divided by ASMs). “NMB” means the National Mediation Board.

  • Fit factor means a quantitative estimate of the fit of a particular respirator to a specific individual, and typically estimates the ratio of the concentration of a substance in ambient air to its concentration inside the respirator when worn.

  • Leverage Factor means the leverage factor in respect of a Series of ETP Securities as specified in the relevant Final Terms.

  • Class Factor As to any date of determination and any Class of Certificates (other than the Interest Only Classes and the Residual Certificates), a fraction the numerator of which is (i) the aggregate of the denominations of all Certificates of such Class plus, in the case of each Accrual Class, all interest that has accrued on the Certificates of such Class prior to such date of determination and been added to the Class Balance thereof, less (ii) the aggregate amount of all Principal Distribution Amounts, if any, allocable thereto prior to such date of determination and the denominator of which is the original Class Balance of such Class. As to any date of determination and any Interest Only Class, a fraction, the numerator of which is the percentage of the balance specified for such purpose under “Reference Sheet–Notional Classes” in the Prospectus Supplement (or, if applicable, the sum of the applicable percentages of the balances so specified) and the denominator of which is the original Class Balance thereof. Code: The Internal Revenue Code of 1986, as amended, including any successor or amendatory provisions.

  • Loss Factor means the scaling factor determined in accordance with clause 7 and applied by the reconciliation manager to volumes of electricity measured or estimated in respect of ICPs on the Network, in order to reflect the impact of the ICP on Losses within the Network;

  • Adjustment Factor means, with respect to a share of the Fund (or one unit of any other security for which a Fund Closing Price must be determined), 1.0, subject to adjustment in the event of certain events affecting the shares of the Fund. See “—Anti-dilution Adjustments Relating to the Fund; Alternate Calculation —Anti-dilution Adjustments” below.

  • Stress Factor means 2.25.

  • Performance Factor means any matter that could or will significantly affect a party’s ability to fulfill its obligations under this Agreement;

  • Exchange Factor means 1.0; provided, however, that if the General Partner: (a) declares or pays a dividend on its outstanding Common Stock in Common Stock or makes a distribution to all holders of its outstanding Common Stock in Common Stock; (b) subdivides its outstanding Common Stock; or (c) combines its outstanding Common Stock into a smaller number of shares of Common Stock, the Exchange Factor shall be adjusted by multiplying the Exchange Factor by a fraction, the numerator of which shall be the number of shares of Common Stock issued and outstanding on the record date for such dividend, contribution, subdivision or combination (assuming for such purpose that such dividend, distribution, subdivision or combination has occurred as of such time), and the denominator of which shall be the actual number of shares of Common Stock (determined without the above assumption) issued and outstanding on the record date for such dividend, distribution, subdivision or combination. Any adjustment to the Exchange Factor shall become effective immediately after the effective date of such event retroactive to the record date, if any, for such event.

  • Interest Factor means monthly compounding, discounting or annuitizing, as applicable, at a rate set forth in Exhibit A.

  • Power Factor means the ratio of usage power measured in kW to total power measured in kVA;

  • NET INVESTMENT FACTOR The Net Investment Factor is an index applied to measure the investment performance of a Subaccount from one Valuation Period to the next. The Net Investment Factor for any Subaccount for any Valuation Period is determined by dividing (1) by (2) and subtracting (3) from the result, where:

  • Certificate Factor With respect to any Class of Regular Certificates as of any Distribution Date, a fraction, expressed as a decimal carried to six places, the numerator of which is the aggregate Certificate Principal Balance (or the Notional Amount, in the case of the Class CE Certificates) of such Class of Certificates on such Distribution Date (after giving effect to any distributions of principal and allocations of Realized Losses in reduction of the Certificate Principal Balance (or the Notional Amount, in the case of the Class CE Certificates) of such Class of Certificates to be made on such Distribution Date), and the denominator of which is the initial aggregate Certificate Principal Balance (or the Notional Amount, in the case of the Class CE Certificates) of such Class of Certificates as of the Closing Date.

  • Performance Factors means any of the factors selected by the Committee and specified in an Award Agreement, from among the following objective measures, either individually, alternatively or in any combination, applied to the Company as a whole or any business unit or Subsidiary, either individually, alternatively, or in any combination, on a GAAP or non-GAAP basis, and measured, to the extent applicable on an absolute basis or relative to a pre-established target, to determine whether the performance goals established by the Committee with respect to applicable Awards have been satisfied:

  • Technique factors means the following conditions of operation:

  • S&P Discount Factor means for purposes of determining the Discounted Value of any S&P Eligible Asset, the percentage determined by reference to the rating on such asset and the shortest Exposure Period set forth opposite such rating that is the same length as or is longer than the S&P Exposure Period, in accordance with the table set forth below:

  • Moody’s Discount Factor means the discount factors set forth in the Moody's Guidelines for use in calculating the Discounted Value of the Fund's assets in connection with Moody's long-term preferred share ratings of the VRDP Shares at the request of the Fund.

  • Capacity factor means the ratio of the average load on a machine or equipment for the period of time considered to the capacity rating of the machine or equipment.

  • Inflation Factor means a number determined for each tax year by dividing the consumer price index for June of the tax year by the consumer price index for June 2005.

  • Multiplier means 1.0.

  • Discount Factor means the percentage discount applied to additional APCs when more than one APC is provided during the same visit (including the same APC provided more than once). Not all APCs are subject to a discount factor.

  • Fitch Discount Factor means the discount factors set forth in the Fitch Guidelines for use in calculating the Agency Discounted Value of the Company’s assets in connection with Fitch’s ratings then assigned on the Senior Securities.

  • Weighting with respect to an Underlying means the weighting in relation to the relevant Underlying as specified in the table in the definition of such Underlying.

  • Rating Agency Discount Factor means the Fitch Discount Factor (if Fitch is then rating Preferred Stock) or an Other Rating Agency Discount Factor, whichever is applicable.