Side Panels definition

Side Panels. On each side of the vest there shall be a stretch side panel that has a double zipper expansion feature with a cover. The stretch mesh shall be doubled. There shall be a #5 YKK 10” Vislon zipper with semi-automatic locking mechanism on each side panel, as well as an additional insert part half zipper to allow for size adjustment. The right side panel shall have a left side slider zipper and the left side panel shall have a right side slider zipper. The half insert zipper shall be covered by a non-bonded fabric flap cover with two 18-ligne hidden snaps so the cover hides the second insert zipper when not in use. The double zipper feature shall allow for expansion or contraction of 1¾” on each side. Epaulets: The epaulets shall be sewn onto the shoulder edge and shall extend to within 3/8” of the neck edge. The epaulet shall button at point 1¼” from the neck edge. The Epaulet shall be 1¾” wide at the shoulder edge and taper to 1½”, then to a point. The overall length of the epaulet shall be approximately 5½” on size L. The epaulet shall be double thickness with a single edge stitch on the perimeter. There shall be a hidden ligne 16 button attached 1 3/8” from the epaulet attachment button on each side under each epaulet to attach a unique microphone sling to insure that the radio microphone is in the proper place to be deployed. Pockets: The vest carrier shall have two Military-styled box pleated, breast patch pockets with mitered corner pocket flaps. The breast pocket shall be 5 3/4” wide X 6” long. The center pleat shall be 1½” wide. The bottom corners of the pocket shall be miter shape cut on a 40 degree angle and shall be 1” long. The pocket flaps shall be 6” wide and 2¾” long at center. The flaps shall be attached to the vest carrier body 1/4” above the top of the pocket, resulting in a complete pocket measurement of 6 3/8” long. The pocket shall be edge stitched around the perimeter. The pocket corners shall be reinforced with bar tacks. There shall be a 1 3/8” pencil opening on both the left and right flap. The two outside points of each pocket flap shall have concealed Velcro closures. Each flap shall have a ligne 20 button sewn to a false buttonhole on the surface of the flap. (Pocket dimensions will vary with size). There shall be ½” wide silver reflective tape located ½” below the top pocket opening of each chest pocket, hidden by the pocket flaps. Badge Tab: There shall be two small (horizontal) buttonholes, 1¼" apart sewn through the left chest ...
View Source

Examples of Side Panels in a sentence

  • Side Panels are extremely useful, though may be hidden by a user if needed.

  • Transom and Side Panels: Fabricate matching panels with same construction, exposed surfaces.

  • SECURE the Side Panels (6) to the Bottom Shelf by tightening the Cam Locks with the philips screwdriver, DO NOT OVERTIGHTEN.

  • ALIGN the edges of the Side Panels (6) and Bottom Shelf and INSERT the Cam Lock Connector Bolts (9) into the Cam Locks (8).

  • INSERT two 50mm Screws (10) through the predrilled holes in the Bottom Shelf and into the Side Panels (6) and tighten.

Related to Side Panels

  • DSX Panel means a cross connect bay or panel used for the termination of equipment and facilities operating at digital rates.

  • Side Yard means a yard of a lot extending from the front yard to the rear yard, and from the side lot line to the nearest wall of the nearest main building or structure on the lot;

  • Panel means the Panel on Takeovers and Mergers;

  • Principal Display Panel or Panels means that part, or those parts of a label that are so designed as to most likely be displayed, presented, shown or examined under normal and customary conditions of display or purchase. Whenever a principal display panel appears more than once, all requirements pertaining to the “principal display panel” shall pertain to all such “principal display panels.”

  • the Panel means a committee appointed by the authority under section 102(4) of the Local Government Act 1972 for the purposes of advising the authority on matters relating to the dismissal of relevant officers of the authority;