Sampling location definition

Sampling location means an access box, valve, spigot or similar structure from which samples representative of an industrial wastewater discharge from a particular process or processes, piece of equipment, activity, building, or facility are collected.
Sample 1Sample 2Sample 3
Sampling location. , means an area of the property that does not have a radius larger than two metres. O. Reg. 153/04, s. 48 (4).
Sample 1Sample 2Sample 3
Sampling location means the specific position at which a sampling port is located in a stack or chimney.
Sample 1Sample 2Sample 3

Examples of Sampling location in a sentence

  • Sampling location and pollution load and/or treatment is indicated in the sample name.

  • Systems may apply to the Department for a monitoring waiver as specified in Rule 62-560.545, F.A.C. (2) Sampling location.

  • Sampling location should be selected based upon the specific information to be obtained.

  • Sampling location and structure must conform to the Stark County Metropolitan Sewer District’s pretreatment and construction specifications.

  • Sampling location – Samples taken in compliance with the monitoring requirements specified above for Outfall TX1 shall be taken at the following location: at the same location as for Outfall 001.

  • The contact information must be submitted using EPA’s electronic data reporting system, as specified in paragraph (b)(1) of this section, and include the name, affiliation, mailing address, phone number, fax number, and e-mail ad- dress for your PWS Technical Contact and your PWS Official.(2) Sampling location and inventory in- formation.

  • During each sampling run carried out in accordance with Conditions 55 and 56, records shall be kept of: Sampling date and time; Weather conditions; Sea state; Sampling location; Water depth; Time that dredging and placement of dredged material in the CMA commenced; and Time of low and high tide on day of sampling.

  • Table 28: Sampling location of silted materialLocation Description Sample collection description No. of SampleBifurcation point of Mundeswari and Damodar (Amta) CanalSample drawn from Mundeswari river bed Physical and chemical characteristics of all collected samples were analysed and heavy mental parameters were compared against US EPA standard for sediment quality in absence of any related national standard in India.

  • Stockpile Management ************************************************************************** NOTE: Sampling location, contaminant type, andsampling frequency should be presented for each feed type and/or treated material/sludge.

  • They will clearly identify the particular sample and should include the following information: • Site name and project number;• Date and time the sample was collected;• Sample preservation method;• Analysis requested; and• Sampling location.


More Definitions of Sampling location

Sampling location means the approved location where a representative sample of a discharge is collected for regulatory or billing purposes. For industrial wastewater discharge permittees, it is referred to as the Point of Compliance (POC).
Sample 1Sample 2
Sampling location means the specific position at which a sampling port is located in a stack or chimney. "Sampling port" means an opening in a stack or chimney into which sampling or measuring devices may
Sample 1
Sampling location means an access b ox, valve, spigot or similar structure from which samples representative of an industrial wastewater discharge from a
Sample 1

Related to Sampling location

  • SITE / LOCATION means any Site where BHARAT PETROLEUM CORPORATION LTD. desires to receive materials any where in India as mentioned in RFQ.

  • Anchor location means the physical location from which:

  • Worksite location means a construction site or other temporary worksite in this state at which the employer provides services for more than twenty days during the calendar year. "Worksite location" does not include the home of an employee.

  • Closing Location means the location that all Proposals for this RFP will be accepted at.

  • Fixed location means a permanent place of doing business in this state, such as an office, warehouse, storefront, or similar location owned or controlled by an employer.

  • Approved Location means (a) a storage terminal or facility located in the United States or Canada owned by the Borrower or a Subsidiary; or (b) other storage location located in the United States or Canada identified by the Borrower by notice to the Administrative Agent for which, if requested by the Administrative Agent, the Borrower has used commercially reasonable efforts to cause the owner, operator or landlord thereof to execute and deliver, a waiver of lien, subordination agreement or similar agreement in form and substance reasonably acceptable to the Administrative Agent with respect to any inventories of Petroleum Products stored at such terminal or facility.

  • Off-Site Location means any real property other than the Real Property.

  • Project Location means the points or areas designated as such on Exhibit A and located on the ground by reference to points, stations, natural land features, improvements, or area boundary signs. STATE means the Oregon Department of Forestry, State Forester, or a duly Authorized Representative of the State Forester.

  • Co-location means the use of an existing tower or structure to support antennae for the provision of wireless services. A replacement tower that is constructed on the same site as an existing tower will be considered a co-location as long as the new tower is no taller than the old tower and that the old tower is removed in a reasonable short time frame after the new tower is constructed.

  • Transboundary movement means any movement of hazardous wastes or other wastes from an area under the national jurisdiction of one State to or through an area under the national jurisdiction of another State or to or through an area not under the national jurisdiction of any State, provided at least two States are involved in the movement;

  • Retail location means a facility listed under NFPA 1124, 7.1.2.

  • Designated Location means the agreed physical location identified in the applicable Notification Form at which where the server-based portion of the Application Software resides.

  • Survey Area means the area of land or waters the subject of a Survey, or proposed to be the subject of a Survey.

  • Return Location means the location from which the Vehicle was hired and which is shown in Rental Vehicle Agreement Part A.

  • Downtown area means the business area of a community that is centrally located within the community within the context of the Iowa main street program.

  • Sampling means the distribution of samples to members of the general public in a public place.

  • movement area means that part of an aerodrome to be used for the take-off, landing and taxiing of aircraft, consisting of the manoeuvring area and the apron(s);

  • Delivery Location means the Supplier's premises or other location where the Services are to be supplied, as set out in the Order;

  • Development Location Point means a single point selected by the Applicant on the proposed Development site that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development. For a Development which consists of Scattered Sites, this means a single point on the site with the most units that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development.

  • Work Locations means any real estate that Windstream owns, leases or licenses or in which it holds easements or other rights to use, or does use, in connection with this Agreement.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Dry cleaning means the process of cleaning articles using perchloroethylene.

  • Site means the place or places where the permanent Works are to be carried out including workshops where the same is being prepared.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Custom Local Area Signaling Service Features (CLASS Features) means certain Common Channel Signaling based features available to End Users, including: Automatic Call Back; Call Trace; Distinctive Ringing/Call Waiting; Selective Call Forward; and Selective Call Rejection.

  • Storage area means any location, facility, or vehicle which is used to store, to transport, or to secure a radiographic exposure device, a storage container, or a sealed source when it is not in use and which is locked or has a physical barrier to prevent accidental exposure, tampering with, or unauthorized removal of the device, container, or source.