Safety Plan means a written document that has procedures, requirements, or standards related to safety which the pool staff shall follow. The safety plan shall include training and emergency response procedures.
Safety Data Sheet means a safety data sheet within the meaning of regulation 5 of the CHIP Regulations;
Safety Management System has the meaning given to it in the ISM Code.
Safety zone means the area officially set apart within a roadway for the exclusive use of
Material safety data sheet or "MSDS" means the chemical, physical, technical, and safety information document supplied by the manufacturer of the coating, solvent, or other chemical product, usually through the distribution network or retailers.
Safety Management Certificate has the meaning given to it in the ISM Code.
Safety means any product which, under normal or reasonably foreseeable conditions of use including duration and, where applicable, putting into service, installation and maintenance requirements, does not present any risk or only the minimum risks compatible with the product's use, considered to be acceptable and consistent with a high level of protection for the safety and health of persons.
Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.
Safety compliance facility means a licensee that is a commercial entity that receives marihuana from a marihuana facility or registered primary caregiver, tests it for contaminants and for tetrahydrocannabinol and other cannabinoids, returns the test results, and may return the marihuana to the marihuana facility.
New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.
health and safety file means a file, or other record containing the information in writing required by these Regulations "health and safety plan" means a site, activity or project specific documented plan in accordance with the client's health and safety specification;
Regulatory Flood Protection Elevation means the “Base Flood Elevation” plus the “Freeboard”. In “Special Flood Hazard Areas” where Base Flood Elevations (BFEs) have been determined, this elevation shall be the BFE plus two (2) feet of freeboard. In “Special Flood Hazard Areas” where no BFE has been established, this elevation shall be at least two (2) feet above the highest adjacent grade.
Contract Manufacturer means a company that produces goods under contract for another company under the label or brand name of that company.
Safety Convention means the International Convention for the Safety of Life at Sea, 1974 (a copy of the English text of the articles of which, and of part of the annex to which, is set forth in Schedule 4), as affected by any amendment, other than an amendment objected to by Australia, made under Article VIII of that Convention and, after the date on which the Protocol of 1978 relating to the Safety Convention enters into force for Australia, as also affected by that Protocol;
Radiopharmaceutical quality assurance means, but is not limited to, the performance of appropriate chemical, biological, and physical tests on potential radiopharmaceuticals and the interpretation of the resulting data to determine their suitability for use in humans and animals, including internal test assessment, authentication of product history, and the keeping of proper records.
Environmental Management System means an environmental management system or plan of management to address all environmental risks and to ensure compliance with all Environmental Laws and licences;
Federal work authorization program means any of the electronic verification of work authorization programs operated by the United States Department of Homeland Security or any equivalent federal work authorization program operated by the United States Department of Homeland Security to verify information of newly hired employees, pursuant to the Immigration Reform and Control Act of 1986 (IRCA), D.L. 99-603.
DMF means any drug master file filed with the FDA, and any equivalent filing in other countries or regulatory jurisdictions.
Flood Documentation means, with respect to each Mortgaged Property located in the United States of America or any territory thereof, (i) a completed “life-of-loan” Federal Emergency Management Agency standard flood hazard determination (to the extent a Mortgaged Property is located in a Special Flood Hazard Area, together with a notice about Special Flood Hazard Area status and flood disaster assistance duly executed by the Borrower and the applicable Loan Party relating thereto) and (ii) a copy of, or a certificate as to coverage under, and a declaration page relating to, the insurance policies required by Section 5.02(c) hereof and the applicable provisions of the Security Documents, each of which shall (A) be endorsed or otherwise amended to include a “standard” or “New York” lender’s loss payable or mortgagee endorsement (as applicable), (B) name the Collateral Agent, on behalf of the Secured Parties, as additional insured and loss payee/mortgagee, (C) identify the address of each property located in a Special Flood Hazard Area, the applicable flood zone designation and the flood insurance coverage and deductible relating thereto and (D) be otherwise in form and substance reasonably satisfactory to the Collateral Agent.
Active Pharmaceutical Ingredient or “API” shall mean one or more of the following active pharmaceutical ingredients: tenofovir alafenamide (“TAF”), tenofovir disoproxil fumarate (“TDF”), elvitegravir (“EVG”), and cobicistat (“COBI”).
Environmental Safeguards means the principles and requirements set forth in Chapter V, Appendix 1, and Appendix 4 (as applicable) of the SPS;
safety standard means the Code of Practice for the Wiring of Premises SANS 10142-1 incorporated in the Regulations;
health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;
Safety Requirements means Prudent Electrical Practices, CPUC General Order No. 167, Contractor Safety Program Requirements, and all applicable requirements of Law, PG&E, the Utility Distribution Company, the Transmission Provider, Governmental Approvals, the CAISO, CARB, NERC and WECC.
MSDS means Material Safety Data Sheet.