Root Cause Failure Analysis definition

Root Cause Failure Analysis or “RCFA” shall mean an assessment conducted pursuant to Section IV.D (Root Cause Failure Analysis for Bypass Venting Incidents) of this Consent Decree to determine the primary cause and any contributing cause of a Bypass
Root Cause Failure Analysis means analysis based on a case-by-case investigation that seeks to discover the event that caused a Product failure, which, once removed, will prevent a like event from occurring again.
Root Cause Failure Analysis means an analysis prepared by Supplier which specifies and logs the reason for the failure, the event causing the failure, the conditions leading to the event, the failure mechanism and the recommended corrective actions.

Examples of Root Cause Failure Analysis in a sentence

  • ExxonMobil shall conduct a Root Cause Failure Analysis for each acid gas flaring event and hydrocarbon flaring event within 45 days of the end of the event, in accord with the Root Cause Failure Analysis as prescribed in Appendix H (Consent Decree paragraphs 79, 80, 81).

  • Root Cause Failure Analysis Requirements .......................................................

  • The Downtime Corrective Action Plan shall require Par to undertake, as expeditiously as reasonably possible, such reasonably available corrective actions as are necessary to correct the cause of the CEMS/CMS Downtime and to prevent a recurrence of the root cause(s) identified in the CEMS/CMS Root Cause Failure Analysis.

  • For any CEMS/CMS for which a CEMS/CMS Root Cause Failure Analysis is required twice within 12 consecutive Calendar Quarters, Par shall retain an independent third party to evaluate Par’s assessment of CEMS/CMS Downtime cause(s), which may include recommendations for additional corrective actions or modification to Par’s CEMS/CMS O&M Plan.

  • Solely for the purpose of conducting a CEMS/CMS Root Cause Failure Analysis under this Paragraph 28, Downtime for the Kapolei SRP CEMS on each Tail Gas Incinerator (i.e., H1353 and H1391) will be quantified independently.

  • The findings of the CEMS/CMS Root Cause Failure Analysis and Downtime Corrective Action Plan, including a schedule for implementation, shall be submitted to EPA and Hawaii DOH in a written report included with the first semi-annual report required by Section X of this Consent Decree following completion of the CEMS/CMS Root Cause Failure Analysis.

  • After a review of a CEMS/CMS Root Cause Failure Analysis and Downtime Corrective Action Plan, EPA may notify Par in writing of: (i) any deficiencies in the corrective actions listed in the findings; or (ii) any objections to the schedules of implementation of the corrective actions and explain the basis for EPA’s objections.

  • If the models produce similar groupings of countries we would expect that most observations are placed in the same cells in alternative non-linear models.

  • If EPA and Par cannot agree on the appropriate corrective action(s) or implementation schedule(s), if any, to be taken in response to a CEMS/CMS Root Cause Failure Analysis, either party may invoke dispute resolution pursuant to Section XV of this Consent Decree.

  • The Benzene PMOP Plan shall be revised and updated to incorporate additional preventative maintenance measures and/or practices whenever a Root Cause Failure Analysis required under sub-paragraph 19.V.iv.a. determines that such corrective actions would reduce the likelihood of a recurrence of similar uncontrolled emissions.


More Definitions of Root Cause Failure Analysis

Root Cause Failure Analysis means an assessment conducted through a process of investigation to determine the primary cause, and any other contributing cause(s), of a discharge of gases in excess of specified thresholds.

Related to Root Cause Failure Analysis

  • Root Cause Analysis means a method of problem solving designed to identify the underlying causes of a problem. The focus of a root cause analysis is on systems, processes, and outcomes that require change to reduce the risk of harm.

  • Root Cause Analysis Report means a report addressing a problem or non-conformance, in order to get to the ‘root cause’ of the problem, which thereby assists in correcting or eliminating the cause, and prevent the problem from recurring.

  • Persistent Failure means any two (2) or more failures by the Supplier in any rolling period of twelve (12) months to comply with obligations in respect of the Contract Services under the Contract;

  • Service Failure means a failure by the Contractor to provide the Services in accordance with any individual service level described above (measured on a monthly/quarterly/annual basis)

  • Service Level Failure means a failure to perform the Software Support Services fully in compliance with the Support Service Level Requirements.

  • Supply Failure has the meaning given to it in Section 7.5.2 (Supply Failure).

  • Milestone Failure means a failure by the Grant Recipient fully to achieve any Milestone by the relevant Milestone Date;

  • Independent testing laboratory means an independent organization, accepted by the Contracting Officer, engaged to perform specific inspections or tests of the work, either at the site or elsewhere, and report the results of these inspections or tests.

  • Technical Failure means the discontinuation of Development or Commercialization of a Product for technical, scientific, medical or regulatory reasons, including, but, not limited to, unacceptable preclinical toxicity, demonstration of a side effect profile significantly worse than currently marketed products, or inability to manufacture in an acceptable purity or for an acceptable price.

  • GEP Failure means Seller’s failure to produce Delivered Energy in an amount equal to or greater than the Guaranteed Energy Production amount for the applicable Performance Measurement Period.

  • Applied behavior analysis means the design, implementation, and evaluation of environmental modifications, using behavioral stimuli and consequences, to produce socially significant improvement in human behavior, including the use of direct observation, measurement, and functional analysis of the relationship between environment and behavior.

  • MI Failure means when an MI report: a) contains any material errors or material omissions or a missing mandatory field; or b) is submitted using an incorrect MI reporting Template; or c) is not submitted by the reporting date(including where a Nil Return should have been filed);

  • Testing laboratory means a laboratory, facility, or entity in the state that offers or performs tests of cannabis or cannabis products and that is both of the following:

  • Internal test assessment means, but is not limited to, conducting those tests of quality assurance necessary to ensure the integrity of the test.

  • Reporting Failure has the meaning set forth in Section 2.4.

  • Epidemic Failure means a series of repeating failures or defects resulting in at least a 0.5% failure rate for the same Product or Material during any twelve-month period.

  • Network Termination Point (NTP) means the physical point at which a subscriber is provided with access to a public communications network; in the case of networks involving switching or routing, the NTP is identified by means of a specific network address, which may be linked to a subscriber number or name;

  • Covenant Testing Period means the period commencing on the last day of the fiscal month of Borrower most recently ended prior to the occurrence of a Fixed Charge Test Commencement Date for which month Borrowers have delivered to Agent monthly financial statements of Solutions and its Subsidiaries, and continuing until the Termination Date has occurred.

  • Excused Outage means any disruption to or unavailability of Services caused by or due to (i) Scheduled Maintenance,

  • Listing Failure Event means that:

  • Force Majeure Failure has the meaning set forth in Section 8.1(d).

  • Rectification Period means the period of time set out in Section 4.3 of this RFP during which a Proponent will be permitted to rectify its Proposal to satisfy the mandatory submission requirements of this RFP.

  • Pregnancy disability means a pregnancy-related medical condition or miscarriage.

  • Consistent Failure means any of:

  • major accident means an incident involving loss of life inside or outside the establishment or ten or more injuries inside and/or one or more injuries outside or release of toxic chemical or explosion or fire or spillage of hazardous chemical resulting in ‘on-site’ or ‘off-site’ emergencies or damage to equipment leading to stoppage of process or adverse effect to the environment;

  • Persistent Breach means a Default which has occurred on three or more separate occasions with a continuous period of six (6) months.