Road width definition

Road width or "Width of road/street" means the whole extent of space within the boundaries of a road when applied to a new road/street, as laid down in the city survey or development plan or prescribed road lines by any act or law and measured at right angles to the course or intended course of direction of such road.
Sample 1Sample 2Sample 3
Road width means top of outside batter to batter; “SFO” means Senior Finance Officer;
Sample 1Sample 2Sample 3
Road width means the distance between the boundaries of a road including footways and drains measured at right angles to the centre of the plot. In case of roads having service roads in addition to the main roads, the width of road shall be the aggregate width of service roads and main roads for determining FAR and No. of Floors.
Sample 1Sample 2Sample 3

Examples of Road width in a sentence

  • Road width may be less than the County standards if safety and traffic requirements are met and the design harmonizes with land uses.

  • Road width measurements for the above purpose shall be of the road as designed and laid and the existence of unauthorized encroachments, for which no patta has been given, will not normally affect adversely provided the shortage in width in the min.

  • Road width in (m)FAR for Commercial/Residential BuildingUp to 6 (2) In case of Institutional and Assembly building the maximum permissible FAR shall be 1.50 for plots up to 1000 sqm.

  • Basement shall be permitted on plot abutting Minimum Road width 12 m or above and coverage up to Building Envelop only.

  • It describes the ED system as classes having attributes and operations.• Business Protocol (BP): a model describing the system as a workflow of activities and flows among roles.• Examination Report (ER): It represents the digital mock- ups of an emergency report as a set of fields.Models associated to these viewpoints have been elaborated by separate design teams as part of a case study involving several research teams [8].

  • Basement parking shall be permitted on plot abutting Minimum Road width 12 m or above.2. Basement parking shall be permitted on plot having minimum plot width 18 m or more and minimum plot depth 20 m or more.3. Side and Rear Setbacks for Basement parking shall be as per Regulation 5.2.4.1, 5.2.4.2.4. Minimum driveway 4.5 m for one-way circulation, 6 m for two-way circulation.5. Minimum Four-wheeler bay size shall be 2.5 m x 5 m.6. The height of basements from floor to ceiling shall be as per Regulation no.

  • Area under PSP may be accommodated in Residential or Commercial as per requirement.5.2.6.1.2 Permissible Uses by Road width :The Minimum width of the abutting road shall not be less than 15 M for redevelopment parcels.

  • Road Side Setback in a Land-Parcel shall be regulated by the Road width it abuts.

  • Road width does not include requirements for gravel shoulders or sidewalk.**An allowance for slight reduction from 24 ft.

  • Sections of footway are shown on the northern boundary of the A4093 Gilfach Road width a width of 1.8m abutting the site frontage as shown on Figs 5.3 5.4 and 5.5 of the TA.


More Definitions of Road width

Road width or "Width of road/street": means the whole extent of space within the boundaries of a road measured at right angles to the course or intended course of direction of such road.
Sample 1Sample 2Sample 3
Road width means the whole extent of space within the boundaries of a road when applied to a development plan or prescribed road lines by any act of law and measured at right angles to the course or intended course of direction of such road;
Sample 1Sample 2Sample 3
Road width means the distance between the boundaries of a road including footways and drains measured at right angles.
Sample 1
Road width or “Right of way ” or “R/W” means the width of the road or streets inclusive of the street or road drain and footpaths and shall be measured at right angles to the course of direction of such street or road.
Sample 1
Road width means the total distance across including road-adjoining drain, footpath etc.;
Sample 1

Related to Road width

  • Width means, in relation to a lot,

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • Bandwidth means a distributor’s defined tolerance used to flag data for further scrutiny at the stage in the VEE process where a current reading is compared to a reading from an equivalent historical billing period. For example, a 30 percent bandwidth means a current reading that is either 30 percent lower or 30 percent higher than the measurement from an equivalent historical billing period will be identified by the VEE process as requiring further scrutiny and verification;

  • Common Channel Signaling (CCS means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Connectivity means the provision of a Permanent Separated Bicycle Lane system that reflects desired routes between all major origins and destinations in the city.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • Network Area means the 50 mile radius around the local school campus the Named Insured is attending.

  • Common Channel Signaling (“CCS”) is a method of digitally transmitting call set-up and network control data over a digital signaling network fully separate from the public switched telephone network that carries the actual call.

  • Lot width means the shorter of the following two linear measurements:

  • Network means the participating providers described in the Provider Directory.

  • Signaling System 7 (SS7 means a signaling protocol used by the CCS Network.

  • Router means a modem or router provided by us for use by you in connection with the Broadband Service.

  • Scaling as used herein, involves:

  • Distance means the great circle distance between the aerodrome of departure and the aerodrome of arrival plus an additional fixed factor of 95 km; and

  • Generation Service means the sale of electricity, including ancillary services such as the provision of reserves, to a Customer by a Competitive Supplier.

  • Trunk means a communication line between two switching systems.

  • Interactive computer service means any information service, system, or ac- cess software provider that provides or enables computer access by multiple users to a computer server, including specifically a service or system that provides access to the Internet and such systems operated or services of- fered by libraries or educational insti- tutions.

  • Landing area means that part of a movement area intended for the landing or take-off of aircraft;

  • Connect means the installation of the Connection Equipment in such a way that (subject to Energisation) the Customer may import electricity to, and/or export electricity from, the Customer’s Installation over the Distribution System at the Connection Point;

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Substation means the apparatus that connects the electrical collection system of the WECS(s) and increases the voltage for connection with the utility's transmission lines.

  • Sewer System means pipelines or conduits, pumping stations, force mains, vehicles, vessels, conveyances, injection wells, and all other constructions, devices, and appliances appurtenant thereto used for conducting sewage or industrial waste or other wastes to a point of ultimate disposal or disposal to any water of the state. To the extent that they are not subject to section 402 of the federal Water Pollution Control Act, ditches, pipes, and drains that serve only to collect, channel, direct, and convey nonpoint runoff from precipitation are not considered as sewer systems for the purposes of this part of this division.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Digital Signal Level 0 (DS-0 means the lowest-level signal in the time division multiplex digital hierarchy, and represents a voice-grade channel operating at either the 56 Kbps or 64 Kbps transmission bit rates. There are twenty-four (24) DS-0 channels in a DS-1.