Retrofit device definition

Retrofit device means any emissions control apparatus, including exhaust aftertreatment device, that has been installed on the vehicle or engine after the original manufacturing date of the complete vehicle.
Sample 1Sample 2Sample 3
Retrofit device means [a best available retrofit technology for installation on an on-road diesel vehicle or on a piece of off-road diesel equipment.] any emissions control apparatus,
Sample 1Sample 2Sample 3
Retrofit device means a device for installation into an existing wood-burning fireplace. The existing fireplace can either be factory built or masonry construction. The primary purpose of the retrofit is to reduce wood smoke pollution from existing fireplaces.  “baseline fireplace” is a typical existing fireplace in which the retrofit device will be installed for testing.  “Phase 2 emission level qualified model” is a fireplace model or retrofit device that has been qualified by EPA under the Program as emitting no more than 5.1 g/kg. Models qualified at the Phase 2 emission level will be recognized as qualified for three years from the date of the EPA letter notifying Partner of the model’s qualified status. Partner may seek renewal of its qualification beyond three years by retesting, recertification, and requalification, or it may seek a waiver (see Partnership Agreement Attachment 1).
Sample 1Sample 2

Examples of Retrofit device in a sentence

  • Retrofit device executive order:8.Verification level:□ LEVEL1□ LEVEL 2□ LEVEL 39.

  • Retrofit device testing in any fireplace other than the Heatilator E36 or Majestic BR42 models should either include: (1) baseline testing without the retrofit device to establish that the fireplace’s baseline emissions are > 10 g/kg, or (2) a demonstration of equivalency to either the Heatilator E36 or Majestic BR42 fireplaces.

  • Retrofit device – means a best available retrofit technology that is installed on an on-road diesel vehicle or on a piece of off-road diesel equipment.

  • Retrofit device cost must be less than 10% of the target residential wood heater system on an installed basis.● Applications proposing novel residential wood heater component development (e.g., novel/improved catalyst, improved sensors, and retrofit devices) must propose quantifiable performance metrics and test methods for baseline and final performance testing.

  • Bringing business back to mission - Organisation C‌ Organisation C is a large, faith-based organisation that employs over 2,000 people across Queensland.

  • In addition, on the Effective Date of the Plan, the electing Holders shall purchase the remaining portion of the New Securities having a par value equal to $5,193,114 for a cash purchase price equal to $5,193,114 pursuant to a note purchase agreement reasonably acceptable to United and Stark (the "Note Purchase").

  • Retrofit device verification level:  LEVEL1  LEVEL 2  LEVEL 35.

  • Retrofit device verification level: D LEVEL1 D LEVEL 2 D LEVEL 35.

  • The make is the manufacture of the Retrofit device, the model is the type of Retrofit device, and the model year is year that the retrofit was manufactured.5. Total Cost of Retrofit ProjectThe total cost of the Retrofit including installation and labor.6. Retrofit Dealer NameName of the business where you will be purchasing the Retrofit device.7. - 10.

  • Each Mxxxxx Sxxxxxx Contributed Subsidiary and each Mxxxxx Sxxxxxx Transferor is conducting and has since January 1, 2008 conducted the Mxxxxx Sxxxxxx Contributed Business and is using and operating and has since January 1, 2008 used and operated the Mxxxxx Sxxxxxx Contributed Assets in compliance with all Laws applicable to it, in each case except as would not reasonably be expected to have a Material Adverse Effect on the Mxxxxx Sxxxxxx Contributed Business.


More Definitions of Retrofit device

Retrofit device means a best available retrofit technology that is an after-market apparatus installed on an on-road diesel vehicle or on a piece of off-road diesel equipment;
Sample 1Sample 2
Retrofit device means any com­ ponent, equipment, or other device:
Sample 1
Retrofit device or “device” means any component that is designed to be installed in or on an automobile (as an addition to, as a replacement for, or through alteration or modifica- tion of, any original component, equipment, or other device); and that any manufacturer,
Sample 1
Retrofit device means a best available retrofit technology that is an after-market apparatus
Sample 1
Retrofit device or "device” means:
Sample 1

Related to Retrofit device

  • Retrofit means to alter, improve, modify, remodel or renovate a building, facility or structure to make that building, facility or structure more energy-efficient.

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).

  • Mobile Device means a computing device, typically smaller than a notebook, which runs a mobile operating system, such as iOS, Android, or Windows Phone. Mobile Devices include smart phones, most tablets, and other form factors.

  • Design-build team means an entity that consists of:

  • Defeat device means any element of design which senses temperature, vehicle speed, engine rotational speed, drive gear, manifold vacuum or any other parameter for the purpose of activating, modulating, delaying or deactivating the operation of any part of the emission control system that reduces the effectiveness of the emission control system under conditions which may reasonably be expected to be encountered in normal vehicle operation and use. Such an element of design shall not be considered a defeat device if:

  • Fabrication means making up data or results and recording or reporting them.

  • compatibility means compatibility as defined in point (10) of Article 2 of Directive (EU) 2019/770;

  • Interoperability means the ability of a CenturyLink OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Capture device means a hood, enclosed room, floor sweep, or other means of collecting solvent emissions or other pollutants into a duct. The pollutant can be directed to a pollution control device such as an incinerator or carbon adsorber.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Design means the appearance of the whole or a part of a product resulting from the features of, in particular, the lines, contours, colours, shape, texture and/or materials of the product itself and/or its ornamentation;

  • Development Work means the work of development to be performed on or with respect to the Land (including, without limitation, the installation of utilities, roads and all related on-site and off-site improvements) in connection with the development of the Land for the subsequent construction thereon of Homes, all of which work and construction shall be completed by or on behalf of the Borrower in accordance with the Plans and Specifications, but shall not include the Construction Improvements.

  • TO Technical Proposal means the TO Contractor’s technical response to the CATS+ TORFP dated date of TO Technical Proposal.

  • Development Works means the external development works and internal development works on immovable property;

  • Interface means the mixture occurring in pipeline operations between adjoining batches having similar or dissimilar physical characteristics.

  • Assistive device means any item, piece of equipment, or product system which is used to increase, maintain, or improve the functional capabilities of an individual with a disability in the workplace or on the job. “Assistive device” does not mean any medical device, surgical device, or organ implanted or transplanted into or attached directly to an individual. “Assistive device” does not include any device for which a certificate of title is issued by the state department of transportation, but does include any item, piece of equipment, or product system otherwise meeting the definition of “assistive device” that is incorporated, attached, or included as a modification in or to such a device issued a certificate of title.

  • functionality means the ability of a tenderer to provide goods or services in accordance with specifications as set out in the tender documents.

  • Feedback means input regarding the SAP Products, services, business or technology plans, including, without limitation, comments or suggestions regarding the possible creation, modification, correction, improvement or enhancement of the SAP Products and/or services, or input as to whether Partner believes SAP’s development direction is consistent with their own business and IT needs.

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Payment device means any credit card as defined in 15 U.S.C. § 1602(k) or any "accepted card or

  • The Works/Project means the works to be executed or done under this contract.

  • Urgent Works means any urgent measures, which in the opinion of the Engineer-in-charge become necessary during the progress of the work to obviate any risk of accident or failure or which become necessary for security.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Assistive technology device means any item, piece of equipment, or product system that is used to increase, maintain, or improve the functional capacities of a child with a disability.

  • Runtime Product means the version specific files and application program interfaces (APIs) specified in the RUNTIME.TXT file provided with SAP Crystal Reports 2008, SAP Crystal Reports for Eclipse 2.0, and SAP Crystal Reports for Visual Studio 2010.