Resins definition

Resins means all chromatographic media intended to refine or purify the Vector Product, as specified in the Master Batch Record, all of which meet the applicable Materials Specifications.
Sample 1Sample 2Sample 3
Resins means the chromatographic media to refine and/or purify the Products, as specified in the Master Batch Record and/or Specifications.
Sample 1Sample 2Sample 3
Resins means all chromatographic media intended to refine or purify the Drug Substance, as specified in the Master Production Record, all of which meet the applicable Materials Specifications. The Parties agree and acknowledge that the Quality Agreement contains a definition of “Resins” that differs from the one set forth above, and that the foregoing definition shall not apply to the Quality Agreement.
Sample 1Sample 2

Examples of Resins in a sentence

  • Tenneco Resins, Inc., 953 F.2d 909, 915-16 & n.7 (5th Cir.), cert.

  • The synthetic resin shall be homogeneous and shall meet the requirements in Table 702-3 Synthetic Resins.

  • Resins containing butyl glycidyl ether (BGE) or other highly volatile and hazardous reactive diluents are not acceptable.

  • Unless explicitly agreed to otherwise in writing by the DSM Selling Entity, all offers, quotations, sales and deliveries of DSM products are subject to the General Conditions of Sale of such DSM Selling Entity.This document has been issued by DSM Coating Resins on behalf of the DSM Selling Entity.

  • ProREZ Performance Resins & Coatings liability with respect to this warranty is strictly limited to the value of the material purchase.

  • Tenneco Resins, Inc., 953 F.2d 909, 912-13 (5th Cir.), quoting Celotex Corp.

  • Gas and aerosol detectors containing NARM previously manufactured and distributed in accordance with a specific license issued by a licensing state shall be considered exempt under 410 IAC 5-3-4(c)(3)(i), provided that the device is labeled in accordance with the specific license authorizing distribution, and provided further that they meet the requirements of 410 IAC 5-3-13(c).(4) Resins containing scandium-46 and designed for sand consolidation in oil wells.

  • On 15 December 2000, Korea requested consultations with the Philippines concerning the Preliminary and Final Determinations of the Tariff Commission of the Philippines on Polypropylene Resins from Korea, dated 15 November 1999 and 11 September 2000 respectively.

  • MIL–R–21607E(SH), Military Spec- ification, Resins, Polyester, Low Pres- sure Laminating, Fire-Retardant, (May 25, 1990), IBR approved for § 160.010–5 (‘‘MIL–R–21607E(SH)’’).[USCG–2010–0048, 76 FR 62974, Oct.

  • Based on Kynar 500 Resins are to be applied in accordance AAMA 605.2. Specify colour from Valspar current chart.


More Definitions of Resins

Resins means all chromatographic media intended to refine or purify the Drug Substance, as specified in the Master Production.
Sample 1Sample 2
Resins means the purification Resins, UF membranes and any other materials that are used across multiple Batches as part of the provision of Services.
Sample 1Sample 2
Resins means the purification Resins, UF membranes and any other materials that are used across multiple Batches as part of the provision of Services. ​ [***] CERTAIN IDENTIFIED INFORMATION HAS BEEN EXCLUDED FROM THE EXHIBIT BECAUSE IT BOTH (A) IS NOT MATERIAL AND (B) WOULD BE COMPETITIVELY HARMFUL IF PUBLICLY DISCLOSED
Sample 1
Resins means the chromatographic media and/or UF membranes [***], as specified in the Master Batch Record.
Sample 1
Resins means the Purchaser's assets at the Site which at the Effective Date are, or at any time thereafter shall be, operated by the Purchaser. For the avoidance of doubt, this definition excludes assets for the production of demineralised water and assets for the production of certain solvents (COF-1), which are owned by the Supplier or an Affiliate of the Supplier;
Sample 1

Related to Resins

  • Additives means non-hydrocarbon compounds added to or blended with a product to modify its properties;

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Polystyrene foam means blown polystyrene and expanded and

  • Consumables means all items which are consumed in the execution of the Work, without being directly incorporated in the Work, such as fuel, electricity, water, POL, welding rods, electrodes and utilities.

  • Grinding means to reduce to powder or small fragments and includes mechanical chipping or drilling.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Pesticides means chemicals in either of the following subcategories:

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Cartridge means a pleated or surface-type filter component with fixed dimensions that is designed to remove suspended particles from water flowing through the filter.

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • Raw Materials means all raw materials, supplies, components and packaging necessary to manufacture and ship the Product in accordance with the Specifications, as provided in Exhibit A, but not including the API.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • nanomaterial means a natural, incidental or manufactured material containing particles in an unbound state or as an aggregate or as an agglomerate and where, for 50 % or more of the particles in the number size distribution, one or more external dimensions is in the size range 1-100 nm;

  • Cannabis waste means waste that is not hazardous waste, as defined in Public Resources Code section 40141, that contains cannabis and that has been made unusable and unrecognizable in the manner prescribed in sections 5054 and 5055 of this division.

  • Tissue means a portion of the human body other than an organ or an eye. The term does not include blood unless the blood is donated for the purpose of research or education.

  • Cream means cream obtained directly and exclusively from milk.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Inert ingredient means an ingredient which is not an active ingredient.

  • Disposable respirator means a respirator for which maintenance is not intended and that is designed to be discarded after excessive breathing resistance, sorbent exhaustion, physical damage, or end-of-service-life renders it unsuitable for use. Examples of this type of respirator are a disposable half-mask respirator or a disposable escape-only self-contained breathing apparatus (SCBA).

  • Fluoroscopy means a technique for generating x-ray images and presenting them simultaneously and continuously as visible images. This term has the same meaning as the term "radioscopy" in the standards of the International Electrotechnical Commission.

  • Sorbent means a material that is used to soak up free liquids by either adsorption or absorption, or both. “Sorb” means to either adsorb or absorb, or both.

  • Milk means the produce of the milking of one or more cows;