Refining process definition

Refining process means the combination of physical and chemical operations including, but not limited to, distillation, cracking, and reformulation, performed on crude oil in order to produce petroleum products, including gasoline.
Sample 1Sample 2Sample 3
Refining process means the combination of physical and chemical operations including, but not limited to, distillation, cracking, and reformulation, performed on crude oil (or derivatives of crude oil) in order to produce petroleum products.
Sample 1Sample 2
Refining process means the process of refining the Raw Materials to produce the Products including the transportation of Raw Materials and Products to and from and within the Site and the Facility;
Sample 1

Examples of Refining process in a sentence

  • Refining process of steel Producer c.1 BF- BOF route c.2 Corex - BOF route c.

  • On the same ground, Knight contested the modernist claim that, as a natural science, economics was committed to increasing scientific understanding of behavioral mechanisms for the purpose of prediction and control.

  • Refining process of big data results in huge amount of valuable treasury.

  • Refining process is helpful in the separation of crude oil which composes of hundreds of different hydrocarbon molecules.

  • Unit No 6 (8 hrs)Fuels and Emission of I.C. Engines.Chemical structure of the Petroleum, Refining process for petroleum, important qualities of the Engine fuels - (SI & CI engines), Alternate fuels (SI & CI engines)- Liquid fuels, gaseous fuels, hydrogen engines (LPG, HC NG (15%, 20%, 25 % Blends Hydrogen and Biofuels), diesel, Gasoline fuels Indian specifications.

  • Progress• Coordinating integrated program-wide to define the “Northwest Sense of Place.”• Continuing refinements to executive decision matrix and organizational chart to reflect changes in staff and responsibilities for AAG.• Refining process to capture aeronautical vs.

  • Refining process of CPO produces either refined, bleached and deodourised palm oil (RBDPO) or neutralised, bleached and deodourised palm oil (NBDPO).

  • Refining process is underway differentiating when 911 texts/email messages and home phone messages will be sent.

  • On cross-examination, Borja agreed that the Defendant had only one conviction for driving under the influence and that his last criminal conviction was in 2001.

  • It is important to ensure that the DBPO qualities are within the desired quality range in order to monitor the efficiency of degumming and bleaching processes and hence will not affect the later stage of refining, deodorisation.2.5 Refining Methods of Palm Oil Refining process is a necessary step for the production of edible oils and fats products.

Related to Refining process

  • Manufacturing Process means any process for—

  • Bidding Process means the procurement procedure under which sealed bids are invited, received, opened, examined and evaluated for the purpose of awarding a contract;

  • Tendering Process means the process commenced by the issuing of this Request for Proposals and concluding upon formal announcement by the DBSA of the selection of a successful Bidder(s) or upon the earlier termination of the process.

  • Marijuana processor means a person who processes marijuana items in this state.

  • Manufacturing means all activities related to the manufacture of a Compound, including planning, purchasing, manufacture, processing, compounding, storage, filling, packaging, waste disposal, labeling, leafleting, testing, quality assurance, sample retention, stability testing, release, dispatch and supply, as applicable.

  • Recycling Facility means equipment used by a trade or business solely for recycling:

  • Cannabis processing facility means a person that:

  • Manufacturing Facilities means facilities engaged in the mechanical or chemical transformation of materials or substances into new products and shall include:

  • Remanufacturing means the activity of overhauling, retrofitting, fabricating, or repairing a product or its component parts for ultimate sale at retail.

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Processing Plant means plant systems, located on or off the Leased Premises, that include a gas processing plant, natural gasoline plant, gasoline plant, or other plant where raw unprocessed natural gas is processed to remove or extract Raw Mix from the natural gas stream to produce a Pipeline- Quality Natural Gas or Residue Gas and other products, and the Raw Mix is then either (i) separated by fractionation down to its base components prior to storage and/or transport that meets or conforms to all applicable Gas Processors Association (GPA) Standards and/or Specifications for the commercial sale of each liquefiable hydrocarbon product, or (ii) transported to another plant for separation down to its base components by fractionation prior to storage and/or transport for the commercial sale of each liquefiable hydrocarbon product. Any deductions, costs, or processing fees associated with the removal or recovery of Natural Gas Liquids is strictly limited to only that part of any Processing Plant or facility where Raw Mix is recovered, and if applicable at that plant, also fractionated to their component parts.

  • Water supply system means a water distribution system, piping, connection fittings, valves and appurtenances within a building, structure, or premises. Water supply systems are also referred to commonly as premise plumbing systems.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Quality Agreement has the meaning set forth in Section 9.6.

  • Scope of Works means the sections of the RFQ detailing the technical requirements of the work to be carried out as existing at the Date of Acceptance of the Quotation and any modification of such Works thereafter directed or the use of which has been permitted by the Superintendent for the purposes of the Contract.

  • Wastewater System means a system of wastewater collection, treatment,

  • Biodiesel blend means a fuel comprised of a blend of biodiesel fuel with petroleum-based diesel fuel, suitable for use as a fuel in a compression-ignition internal combustion diesel engine.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Marijuana products means concentrated marijuana products and marijuana products that are comprised of marijuana and other ingredients and are intended for use or consumption, such as, but not limited to, edible products, ointments, and tinctures.

  • Clean coal technology means any technology, including technologies applied at the precombustion, combustion, or post combustion stage, at a new or existing facility which will achieve significant reductions in air emissions of sulfur dioxide or oxides of nitrogen associated with the utilization of coal in the generation of electricity, or process steam which was not in widespread use as of November 15, 1990.

  • Detailed manufacturing or process data means technical data that describe the steps, sequences, and conditions of manufacturing, processing or assembly used by the manufacturer to produce an item or component or to perform a process.

  • Food processing plant means a commercial operation that manufactures, packages, labels or stores food for human consumption and does not provide food directly to a consumer. “Food processing plant” does not include any of the following:

  • Cannabis plant means any plant of the genus Cannabis;

  • Marijuana producer means a person who produces marijuana in this state.