Reference speed definition

Reference speed means the vehicle speed at which road load is determined or chassis dynamometer load is verified.
Reference speed means the vehicle speed at which road load is determined or chassis dynamometer load is verified. Reference speeds may be continuous speed points covering the complete test cycle speed range.

Examples of Reference speed in a sentence

  • Reference speed 10m/s at 10m above sea, corresponds to 12 m/s at the mid-span of the rotor.

  • Engine performance8.1. Engine speeds (1) Low speed (nlo): rpm High speed (nhi): rpm for ESC and ELR cycles Idle: rpm Speed A: rpm Speed B: rpm Speed C: rpm for ETC cycle Reference speed: rpm 8.2. Engine power (measured in accordance with the provisions of Directive 80/1269/EEC) in kW (1) ESC test.(2) ETC test only.

  • Reference speed - calculated “free flow” mean speed for roadway segment in miles per hour.

  • Reference speed is compared with the measured rotor speed (ωr) and it provided speed error ωe.

  • Reference speed limits and related legislationThe starting point for any review of speed limits is to only impose speed limits when required for marine safety, and then to balance speed limits against TOMSA’s objective for enabling the effectiveness and efficiency of Queensland’s maritime industry, together with the GCWA Act’s purpose for minimal regulation.

  • Specified speeds (km/h) > 130 120** 100 80* 60 40 20 130 – 100 90 80* 60 40 20 - 100 – 70 60 50* 40 30 20 - < 70 50** 40* 30 20 - - * Reference speed ** If it could be reached by the vehicle.

  • As soon as course offerings are determined, contact teachers regarding class assignment, teaching materials, and contracts.

  • Figure 45 – Reference speed v/s measured speed with the tuned controller - Simulation Test the Controller on the EV3 Hardware1.

  • Reference speed points range from 20km/h with 10 km/h intervals up to the maximum of 130 km/h, with a 14 km/h margin between vehicle top speed and the highest reference speed point.

  • For data prior to February 1, 2017, the average is calculated using the 12-month period preceding November 2014. Reference speed — an approximation of free-flow speed for the segment.

Related to Reference speed

  • Reference Resource means a combustion turbine generating station, configured with two General Electric Frame 7FA turbines with inlet air cooling to 50 degrees, Selective Catalytic Reduction technology all CONE Areas, dual fuel capability, and a heat rate of 10.096 Mmbtu/ MWh.

  • Reference Tariff means an access charge (including any system premium) applicable to a specified Reference Train Service over a specified part of the Infrastructure as specified in QR Network’s Access Undertaking;

  • Basic generation service or "BGS" means electric generation

  • Information Service is the offering of a capability for generating, acquiring, storing, transforming, processing, retrieving, utilizing, or making available information via Telecommunications, and includes electronic publishing, but does not include any use of any such capability for the management, control, or operation of a Telecommunications system or the management of a Telecommunications Service.

  • Reference Level means the level of the Index (excluding any flash estimates) published or announced by Eurostat (or any successor entity which publishes such index) in respect of the month that is 12 calendar months prior to the month referred to in “Latest Level” above.

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Electric generation service means the provision of retail

  • Information Services means the Municipal Securities Rulemaking Board’s Electronic Municipal Market Access System; or, such other services providing information with respect to called municipal obligations as the District may specify in writing to the Paying Agent or as the Paying Agent may select.

  • Implementation Services has the meaning set forth in Section 2.1.

  • Total resource cost test or "TRC test" means a standard that is met if, for an investment in energy efficiency or demand-response measures, the benefit-cost ratio is greater than one. The benefit-cost ratio is the ratio of the net present value of the total benefits of the program to the net present value of the total costs as calculated over the lifetime of the measures. A total resource cost test compares the sum of avoided electric utility costs, representing the benefits that accrue to the system and the participant in the delivery of those efficiency measures, as well as other quantifiable societal benefits, including avoided natural gas utility costs, to the sum of all incremental costs of end-use measures that are implemented due to the program (including both utility and participant contributions), plus costs to administer, deliver, and evaluate each demand-side program, to quantify the net savings obtained by substituting the demand-side program for supply resources. In calculating avoided costs of power and energy that an electric utility would otherwise have had to acquire, reasonable estimates shall be included of financial costs likely to be imposed by future regulations and legislation on emissions of greenhouse gases.

  • IntraLATA LEC Toll means IntraLATA Toll traffic carried solely by a Local Exchange Carrier and not by an IXC. "IntraLATA Toll Traffic" describes IntraLATA Traffic outside the Local Calling Area.

  • Basic generation service provider or "provider" means a

  • Certified cabinet x-ray system means an x-ray system that has been certified in accordance with 21 CFR 1010.2 as being manufactured and assembled pursuant to the provisions of 21 CFR 1020.40.

  • Construction Services means either of the following for construction-manager-at-risk, design-build and job-order-contracting project delivery methods:

  • Custom Local Area Signaling Service Features (CLASS Features) means certain Common Channel Signaling based features available to End Users, including: Automatic Call Back; Call Trace; Distinctive Ringing/Call Waiting; Selective Call Forward; and Selective Call Rejection.