Real environment Sample Clauses
Real environment. HeERO pilot project in Czech Republic will test IVS from two vendors - Sherlog Trace and Telematix. ECall is transmitted through Telefónica Mobile Network specially adjusted by eCall Flag functionality and eCall reception will be realised in the PSAP “testing platform” which truly simulates the PSAP 112 operating system and is usually used for the new PSAP SW / functions verification. TPS interface as well as data flow towards Traffic mgt system will be tested. eCall will be in general routed to the appropriate PSAP based on caller location at the time of emergency set up activation - origin dependent routing. Basic routing parameter is so called Network Routing Number (NRN). NRN is generated by origin mobile exchange that handle emergency set up of the caller and it corresponds to the region where the caller is located and appropriate PSAP centre should receive and handle the call. During HeERO project eCall will be routed via mobile and fixed network to the local exchange, where the PSAP testing platform is connected via ISDN 30 link. NRN will be in the future also used by PSAP CCD (Call Centre Distribution) part for automatic call distribution to the call taker in respective region. eCall solution will be integrated to the existing system for reception and handling of E112 in Czech Republic. PSAP testing platform integrates: • OmniPCX Enterprise PBX (R 10) of Alcatel Lucent • CCD (Call Center Distribution) • Genesys solution - TServer (R 7.6.003.08) • 1 CCIVR server on Windows 2008 Server • 1 PSAP Application Server on Linux Red Hat 6 • Call taker application for 7 operators • VIN decoder • Communication module with interfaces to external systems • GIS The PSAP eCall modem is a component designed to be one element of the PSAP system. It is an Application Server (AS) designed to be integrated into the Alcatel SIP Network and run on a Linux platform. This component is connected to the PABX via SIP Trunk. External calls received from IVS through the PSTN network are routed to this external AS. The PABX forwards the call and, if required, converts the voice format using its interval media gateway. The eCall modem accepts incoming calls only in G711 codec format. As soon as the RTP channel is started, an eCall voice dialog with the IVS system starts. The normal issue is the reception of a 140 bytes data frame of MSD. When this reception is OK, the eCall modem initiates a dialog with an external component named CCIVR. The role of the CCIVR is to attach the re...