QA Tests definition

QA Tests the quality assurance tests and testing regimes for CTM to be agreed by the DC.
Sample 1
QA Tests means the quality assurance tests and testing regimes for Finished Product as set out in the MA; [***] A CONFIDENTIAL PORTION OF THE MATERIAL HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION.
Sample 1
QA Tests means the quality assurance tests and testing regimes for Finished Product as set out in the MA;
Sample 1

Examples of QA Tests in a sentence

  • The applicant claimed 118,965 euros (EUR) in respect of pecuniary damage.

  • In addition to the above requirements for radiation leakage, the LINAC should also meet all the mandatory safety and radiation leakage as specified by the Atomic Energy Regulatory Board, Mumbai, India in its report “Acceptance / QA Tests for Medical Linear Accelerators”.

  • See Figure 4.8 for an example where the QA: Tests step is marked as fail in the bottom row, and hence so is the whole build.

  • When the QA: Tests step is complete, it will activate a button that has to be manually pressed in order to continue the CD process and start the Deploy to production step.

  • This step also runs some integration tests on the code deployed in the CI environment.• QA: Tests - This step is much like the above, with the difference that the project is deployed in another environment called TEST.

  • Annual and Weekly MR QA tests and Equipment for ACR MR Accreditation Program QA Tests PerformedEquipment Annual Tests aWater-filled phantoms for coils tests are given in the appendix (Table A19).

  • An example of this can be seen in Figure 4.8, where the CI: Automatic tests step is marked as unstable in the upper row, and the project is still deployed to production.– The ability to manually mark the build as pass or fail based on the scan report:Based on the scan report (see Figure 4.10) the QA can mark the QA: Tests step as pass or fail, and if they mark it as fail the whole build will be marked as fail as well.

  • QA Tests Performed on GK RoadSteel BarsBitumen Mortar CubeHMA Binder Course Core/Binder CourseAggregate33661233123639244765650 10 20 30 40 50 60 70b.

  • Columbia shall manufacture such CTM to Specification and shall carry out the QA Tests.

  • Sulfite (Na2SO3)[ ]ppm(mg/L)Hardness(as CaCO3)[ ]ppm(mg/L)Iron (total, as Fe(2)O(3))[ ]ppm(mg/L)Written evaluation summary 3.5.5.4 Steam Boiler Water QA Tests Submit the water quality test report identifying the chemical composition of the boiler, feedwater and condensate water.

Related to QA Tests

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Coverage Tests The Overcollateralization Ratio Test and the Interest Coverage Test, each as applied to each specified Class or Classes of Secured Debt.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Tests means and include such test or tests to be carried out on the part of the contractor as are prescribed in the contract or considered necessary by BHEL, in order to ascertain the quality, workmanship, performance and efficiency of the contractor or part thereof.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Performance and Guarantee Tests , shall mean all operational checks and tests required to determine and demonstrate capacity, efficiency, and operating characteristics as specified in the Contract Documents.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Guarantee Test(s means the test(s) specified in the Technical Specifications to be carried out to ascertain whether the Facilities or a specified part thereof is able to attain the Functional Guarantees specified in the Technical Specifications in accordance with the provisions of GCC Sub-Clause 20.2.1 (Guarantee Test) hereof during/after successful Commissioning followed by Trial - Operation.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.