Protection functions definition

Protection functions means systems functions designed to protect an aircraft from exceeding its flight and manoeuvre limitations.
Protection functions means systems fu nctions designed to protect an aircraft from exceeding its flight and manoeuvre limitations.
Protection functions means systems functions designed to protect an aircraft from exceeding its

Examples of Protection functions in a sentence

  • Protection functions and systems.(2) The applicant shall include with the schematic diagram technical specifications of the point where the DG facility is electrically connected to the customer’s electrical system, including all anti-islanding and power quality protective systems.

  • The public utility shall advise the applicant of any communications requirements after a preliminary review of the proposed installation.NOTE 1: It is important that the applicant contact the electric provider at the earliest possible date, prior to the purchase of protection equipment, to determine any specific protection requirements.NOTE 2: Protection functions are referenced in Appendix II.

  • The Data Protection Officer reports to the school’s Headteacher and Management Committee, but fulfils their Data Protection functions independently.

  • Inter-bank low-value payments will be conducted via shared financial network on the real-time basis.

  • Health Protection functions are also largely covered by these regulations but not wider public health functions, as there is no immediate riskto others’ health.

  • Environmental Protection functions in respect of control of pollution, (air, land and water) regulation of statutory nuisances and other such environmental protection functions.

  • The storage, destruction, and burial of wastes shall be performed in places determined by the decisions of local executive agencies in coordination with the specially authorized executive agencies for Environmental Protection and other executive agencies of the Republic of Kazakhstan which perform Environmental Protection functions.

  • There are many pieces of legislation that span across Planning, Building Control, Housing, Environmental, Anti-Social Behaviour, Crime and Disorder and Public Protection functions.

  • At any reasonable time, the Association or the Forester may request an informal conference on matters of common interest, such as fire-related restrictions on use of forestlands, maintenance of Facilities, and any problems affecting the efficient performance of Fire Protection functions in the District.

  • Therefore, it is essential that the local Civil Engineering and Fire Protection functions be consulted to ensure all fire protection requirements applicable to specific corrosion control functions and facilities are met.

Related to Protection functions

  • critical functions means activities, services or operations the discontinuance of which is likely in one or more Member States, to lead to the disruption of services that are essential to the real economy or to disrupt financial stability due to the size, market share, external and internal interconnectedness, complexity or cross-border activities of an institution or group, with particular regard to the substitutability of those activities, services or operations;

  • School function means any school-sponsored extra-curricular event or activity.

  • Commercially Useful Function means responsibility for the execution of a distinct element of the work of the contract, which is carried out by actually performing, managing, and supervising the work involved, evidencing the responsibilities and risks of a business owner such as negotiating the terms of (sub)contracts, taking on a financial risk commensurate with the contract or its subcontract, responsibility for acquiring the appropriate lines of credit and/or loans, or fulfilling responsibilities as a joint venture partner as described in the joint venture agreement.

  • Essential functions means the fundamental job duties of the employment position the individual with a disability holds or desires. "Essential functions" does not include the marginal functions of the position.

  • Distribution Function means the functions with regard to:

  • Essential job functions means the fundamental job duties of the employment position an individual holds. A job function may be considered essential if-

  • Safety-sensitive function means all time from the time a driver begins to work or is required to be in readiness to work until the time he/she is relieved from work and all responsibility for performing work.

  • Form, fit, and function data means technical data that describes the required overall physical, functional, and performance characteristics (along with the qualification requirements, if applicable) of an item, component, or process to the extent necessary to permit identification of physically and functionally interchangeable items.

  • Governmental function means an activity that is expressly or impliedly mandated or authorized by constitution, statute, local charter or ordinance, or other law. Governmental function includes an activity performed on public or private property by a sworn law enforcement officer within the scope of the law enforcement officer's authority, as directed or assigned by his or her public employer for the purpose of public safety.

  • Service and support administrator means a person, regardless of title, employed by or under contract with a county board to perform the functions of service and support administration and who holds the appropriate certification in accordance with rule 5123:2-5-02 of the Administrative Code.

  • Covered Government support contractor means a contractor (other than a litigation support contractor covered by 252.204-7014) under a contract, the primary purpose of which is to furnish independent and impartial advice or technical assistance directly to the Government in support of the Government’s management and oversight of a program or effort (rather than to directly furnish an end item or service to accomplish a program or effort), provided that the contractor—

  • quality (functionality means the totality of features and characteristics of a product or service that bear on its ability to satisfy stated or implied needs F.1.4 Communication and employer’s agentEach communication between the employer and a tenderer shall be to or from the employer's agent only, and in a form that can be read, copied and recorded. Writing shall be in the English language. The employer shall not take any responsibility for non-receipt of communications from or by a tenderer. The name and contact details of the employer’s agent are stated in the tender data. F.1.5 The employer’s right to accept or reject any tender offer F.1.5.1 The employer may accept or reject any variation, deviation, tender offer, or alternative tender offer, and may cancel the tender process and reject all tender offers at any time before the formation of a contract. The employer shall not accept or incur any liability to a tenderer for such cancellation and rejection, but will give written reasons for such action upon written request to do so. F.1.5.2 The employer may not subsequent to the cancellation or abandonment of a tender process or the rejection of all responsive tender offers re-issue a tender covering substantially the same scope of work within a period of six months unless only one tender was received and such tender was returned unopened to the tenderer. F.2 Tenderer’s obligations F.2.1 EligibilitySubmit a tender offer only if the tenderer satisfies the criteria stated in the tender data and the tenderer, or any of his principals, is not under any restriction to do business with employer. F.2.2 Cost of tenderingAccept that the employer will not compensate the tenderer for any costs incurred in the preparation and submission of a tender offer, including the costs of any testing necessary to demonstrate that aspects of the offer satisfy requirements. F.2.3 Check documentsCheck the tender documents on receipt for completeness and notify the employer of any discrepancy or omission. F.2.4 Confidentiality and copyright of documentsTreat as confidential all matters arising in connection with the tender. Use and copy the documents issued by the employer only for the purpose of preparing and submitting a tender offer in response to the invitation. F.2.5 Reference documentsObtain, as necessary for submitting a tender offer, copies of the latest versions of standards, specifications, conditions of contract and other publications, which are not attached but which are incorporated into the tender documents by reference. F.2.6 Acknowledge addendaAcknowledge receipt of addenda to the tender documents, which the employer may issue, and if necessary apply for an extension to the closing time stated in the tender data, in order to take the addenda into account. F.2.7 Clarification meetingAttend, where required, a clarification meeting at which tenderers may familiarize themselves with aspects of the proposed work, services or supply and raise questions. Details of the meeting(s) are stated in the tender data. F.2.8 Seek clarificationRequest clarification of the tender documents, if necessary, by notifying the employer at least five working days before the closing time stated in the tender data. F.2.9 InsuranceBe aware that the extent of insurance to be provided by the employer (if any) might not be for the full cover required in terms of the conditions of contract identified in the contract data. The tenderer is advised to seek qualified advice regarding insurance. F.2.10 Pricing the tender offer F.2.10.1 Include in the rates, prices, and the tendered total of the prices (if any) all duties, taxes (except Value Added Tax (VAT), and other levies payable by the successful tenderer, such duties, taxes and levies being those applicable 14 days before the closing time stated in the tender data. F2.10.2 Show VAT payable by the employer separately as an addition to the tendered total of the prices.

  • Nonprofessional services means any services not specifically identified as professional services in

  • Federal contract information means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government, but not including information provided by the Government to the public (such as on public Web sites) or simple transactional information, such as necessary to process payments.

  • Related Services means the services incidental to the supply of the goods, such as insurance, delivery, installation, commissioning, training and initial maintenance and other such obligations of the Supplier under the Contract.

  • Contractor Personnel means Contractor’s employees and subcontractors (as well as any employees or subcontractors of those subcontractors) performing the Services.

  • Hosted Services means the hosting, management and operation of the computing hardware, ancillary equipment, Software, firmware, data, other services (including support services), and related resources for remote electronic access and use by the State and its Authorized Users, including any services and facilities related to disaster recovery obligations.

  • Emergency medical services provider means a person who has received formal training in prehospital and emergency care, and is licensed to attend any person who is ill or injured or who has a disability. Police officers, firefighters, funeral home employees and other persons serving in a dual capacity one of which meets the definition of “emergency medical services provider” are “emergency medical services providers” within the meaning of this chapter.

  • Services Requirements means the requirements of the Authority or any other Contracting Body (as appropriate) for the Services from time to time;

  • Professional Services Agreement means the agreement attached hereto as Exhibit C and all written statements of work signed by Licensee and related thereto.

  • Subcontractors means subcontractors or subconsultants at any tier that are under the direct or indirect control or responsibility of the Contractor, and includes all independent contractors, agents, employees, authorized resellers, or anyone else for whom the Contractor may be liable at any tier, including a person or entity that is, or will be, providing or performing an essential aspect of this Contract, including Contractor’s manufacturers, distributors, and suppliers.

  • Services means those functional services ancillary to the supply of the goods, such as transportation and any other incidental services, such as installation, commissioning, provision of technical assistance, training, catering, gardening, security, maintenance and other such obligations of the supplier covered under the contract.

  • Emergency medical services personnel means that term as defined in section 20904 of the public health code, 1978 PA 368, MCL 333.20904.

  • Services Provider means Owl Rock Capital Corporation, or any successor in such capacity in accordance with the Corporate Services Agreement.

  • Transparency Reports means a report in accordance with Schedule 7 Part 1 (Transparency Reports) containing the contract information as set out in the table for that Part for publication by the Authority in the interests of transparency.

  • Customer Proprietary Network Information (“CPNI”) is as defined in the Act.