Programmable Controller definition

Programmable Controller means an industrial-grade modular automation control system that is configurable to meet the requirements of specific automation control applications. A Programmable Logic Controller (PLC) or a Programmable Automation Control (PAC) are deemed to be equivalent.
Sample 1Sample 2

Examples of Programmable Controller in a sentence

  • B(500 mm)(250 mm)GrayCN1CN3YellowBlack(500 mm)ACN4CN2*Up to two cables required for each Programmable Controller I/O Unit.

  • Programmable Controller: Microprocessor controller shall be programmable and shall be designed for connection to a local configuration tool.

  • The programming capability of an AGC may be less flexible than that of a General Purpose Programmable Controller (GPPC).

  • Refer to the CS/CJ/NSJ Series Programmable Controller Programming Manual (W394) for a programming example.

  • The Programmable Controller Expansion I/O Module (PCX) provides additional inputs and outputs for use in the PCG.

  • LONWORKS(r) General Purpose Programmable Controller A programmable control product, that unlike an ASC, is not installed with a fixed factory-installed application program.

  • The 990PAB53 System comes with a mobile carrying case, workstation mounting panel, master control relay circuit, Allen Bradley Compact Logix 5300 Programmable Controller, RS Linx and RS Logix 5000 software, a Panel View Plus terminal, an Ethernet Switch, I/O Simulator, five application circuits.

  • Special Connecting Cables *Cable length L (m) XW2Z-◻◻◻H-2 (For CS1-series I/O Unit Connection) B(250 mm)YellowCN3Black(500 mm) CN2A*Cable length L (m) CN1 Linear lengths (not including bends)*Up to two cables required for each Programmable Controller I/O Unit.

  • Included HMI application backup and restore utility.HMI tag import/export utility to/from CSV file or Excel spreadsheet.HMI tag simulator.HMI tag cross referencing system.4.1.12HMI Data Server / Data Access Protocol / Communication CapabilityProtocol for Programmable Controller to HMI Communications Communication is “change-based” where variables are only communicated to the HMI system upon change.For analog values, the deadband / exception threshold can be adjusted.

  • General Purpose Programmable Controller (GPPC): Unlike an ASC or AGC, a GPPC is not furnished with a fixed application program and does not have a fixed ProgramID or XIF file.

Related to Programmable Controller

  • Data Controller shall have the same meaning as set out in the Data Protection Act 1998;

  • Auditor-Controller means the Auditor-Controller, County of Orange, or designee.

  • Assistant Hydrographic Surveyor means the Assistant Hydrographic Surveyor of the Authority, as the case may be

  • Joint Controller with the other Party;

  • Joint Controllers means where two or more Controllers jointly determine the purposes and means of processing.

  • Controller means the natural or legal person, public authority, agency or other body which, alone or jointly with others, determines the purposes and means of the processing of personal data; where the purposes and means of such processing are determined by Union or Member State law, the controller or the specific criteria for its nomination may be provided for by Union or Member State law;

  • Heat input means the product (expressed in mmBtu/time) of the gross calorific value of the fuel (expressed in Btu/lb) and the fuel feed rate into the combustion device (expressed in mass of fuel/time) and does not include the heat derived from preheated combustion air, recirculated flue gases, or ex- haust from other sources.

  • CHIEF MECHANICAL ENGINEER means the Chief Mechanical Engineer of the Chennai Port Trust.

  • Technician means an individual determined to be qualified to remove or process parts by an appropriate organization that is licensed, accredited, or regulated under federal or state law. The term includes an enucleator.

  • Radiographic operations means all activities performed with a radiographic exposure device, or with a radiation machine. Activities include using, transporting except by common or contract carriers, or storing at a temporary job site, performing surveys to confirm the adequacy of boundaries, setting up equipment, and any activity inside restricted area boundaries. Transporting a radiation machine is not considered a radiographic operation.

  • Structural pest control means a use requiring a license under Chapter 14 (commencing with Section 8500), Division 3, of the Business and Professions Code.

  • Radiation safety officer means an individual who has the knowledge and responsibility to apply appropriate radiation protection regulations and has been assigned such responsibility by the licensee or registrant.

  • aerodrome control service means air traffic control service for aerodrome traffic;

  • Trusted Systems include only the following methods of physical delivery: (1) hand-delivery by a person authorized to have access to the Confidential Information with written acknowledgement of receipt; (2) United States Postal Service (“USPS”) first class mail, or USPS delivery services that include Tracking, such as Certified Mail, Express Mail or Registered Mail; (3) commercial delivery services (e.g. FedEx, UPS, DHL) which offer tracking and receipt confirmation; and (4) the Washington State Campus mail system. For electronic transmission, the Washington State Governmental Network (SGN) is a Trusted System for communications within that Network.

  • external engineering service means an engineering service situated outside the boundaries of a land area and that is necessary to serve the use and development of the land area;

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Child-resistant packaging means packaging that is designed or constructed to be significantly difficult for children under five years of age to open or obtain a toxic or harmful amount of the substance in the container within a reasonable time and not difficult for normal adults to use properly, but does not mean packaging that all children under five years of age cannot open or obtain a toxic or harmful amount of the substance in the container within a reasonable time.

  • Cabinet radiography means industrial radiography conducted in an enclosure or cabinet shielded so that radiation levels at every location on the exterior meet the limitations specified in 641—40.26(136C).

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Specialty contractor means a person who is licensed to conduct business as described in subsection 4 of NRS 624.215.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Vapor control system means a system that prevents release to the atmosphere of gasoline vapors in excess of 80 milligrams per liter of gasoline loaded (4.7 grains per liter).

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • Hosted Services means the hosting, management and operation of the computing hardware, ancillary equipment, Software, firmware, data, other services (including support services), and related resources for remote electronic access and use by the State and its Authorized Users, including any services and facilities related to disaster recovery obligations.

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • Engineering control means the use of substitution, isolation, ventilation, and equipment modification to reduce exposure to SARS-CoV-2 virus and COVID-19 disease related workplace hazards and job tasks.