Programmable definition

Programmable means the electronic technology in the hearing instrument can be modified independently.
View Source
Programmable means that the end device shall support the functionality, but the owner can turn it on or off through table-role and access security provisions of the standard.
View Source

Examples of Programmable in a sentence

  • This pin can be optionally configured as Programmable Alarm 1 Pin after Reset.

  • When Programmable Control 1 is configured, the default setting for Control 1 is control of the TX_DIS.

  • Programmable Control 1 Pin is an input pin from the Host, operating with programmable logic.

  • Programmable Alarm 1 Pin (PRG_ALRM1) is an output pin to the Host, operating with programmable logic.

  • TX Disable Pin (TX_DIS) is optionally configurable as Programmable Control 1 Pin after Reset.

  • This pin can be optionally configured as Programmable Control 1 Pin after Reset.

  • Pin # Symbol Description I/O Logic “H” “L” Pull-up /down 20 PRG_ALRM1 Programmable Alarm 1 MSA Default: HIPWR_ON O 3.3V LVCMOS Active High per CFP MSA MIS Ref.

  • Table 2-1: Control Pins Pin # Symbol Description I/O Logic “H” “L” Pull-up /down Programmable Control 1 17 PRG_CNTL1 MSA Default: TRXIC_RSTn, TX & RX ICs reset, I 3.3V LVCMOS Pull – Up2 "0": reset, "1"or NC: enabled per CFP MSA MIS Ref.

  • Pin # Symbol Description I/O Logic ³H´ ³L´ Pull-up /down 96 TX_DIS (PRG_CNTL1) Transmitter Disable (Optionally configurable as Programmable Control after Reset1) I 3.3V LVCMOS Disable2 Enable2 Pull ±Up3 94 MOD_LOPWR Module Low Power Mode I 3.3V LVCMOS Low Power Enable Pull ±Up3 88 MOD_RSTn Module Reset, Active Low (invert) I 3.3V LVCMOS Enable Reset Pull ± Down4 1 When Programmable Control is configured, MSA Default is TX_DIS.

  • Pin # Symbol Description I/O Logic “H” “L” Pull-up /down 96 TX_DIS (PRG_CNTL1) Transmitter Disable (Optionally configurable as Programmable Control after Reset1) I 3.3V LVCMOS Disable2 Enable2 Pull – Up3 94 MOD_LOPWR Module Low Power Mode I 3.3V LVCMOS Low Power Enable Pull – Up3 88 MOD_RSTn Module Reset, Active Low (invert) I 3.3V LVCMOS Enable Reset Pull – Down4 1 When Programmable Control is configured, MSA Default is TX_DIS.