Processed Quantities definition

Processed Quantities shall the quantity of Natural gas determined by the initiating TSO and by the matching TSO, which takes into account the Network User’s Nomination or Re- nomination, interruptions, constraints and contractual provisions as defined under the STA applicable and which is used as the basis for the Matching Process.
Sample 1Sample 2Sample 3
Processed Quantities means the quantity of gas determined by the initiating TSO and by the matching TSO, which takes into account the Network User’s Nomination or Re-nomination, interruptions, constraints and contractual provisions as defined under the relevant STA and which is used as the basis for the Matching Process..
Sample 1Sample 2Sample 3
Processed Quantities means the quantity of Natural Gas expressed in Kilowatt hour per hour (kWh/h) a TSO is able to receive or deliver, taking constraints on its Transmission System into account.
Sample 1Sample 2Sample 3

Examples of Processed Quantities in a sentence

  • This Party will also proceed to calculate the Processed Quantities as described in Exceptional Event Situation Step 3: TIGF will send ENAGAS GTS the Processed Quantities based on the Nominated Quantities.

  • This Party will also proceed to calculate the Processed Quantities as described in Exceptional Event Situation Step 3: REN will send ENAGAS GTS the Processed Quantities, and Nominated Quantities.

  • Processed Quantities for each TAP Shipper indicating the flow direction.

  • In case of different direction of the Processed Quantities for a given Shipper Code pair, the Confirmed Quantity for this Shipper Code pair (as a result of a “lesser rule”) is equal to zero (0).

  • In case of different Processed Quantities at either side of the IP, the lesser rule will be applied.

  • The TSO shall send the message regarding the Processed Quantities to the respective Network Users no later than 12:30 UTC or, when daylight saving time is applied, 11:30 UTC on Gas Day D-1.

  • The Initiating TSO will calculate and send the Processed Quantities of each of its Shippers to the Matching TSO in accordance to the deadline defined in [Matching Process Section 2].

  • Without prejudice to the Transporters right to determine and submit IP Nomination Processed Quantities for a Shipper in accordance with Section 2.15; each Shipper shall ensure the IP Nominated Quantity specified in such Shipper's IP Entry Nomination(s) or IP CSEP Offtake Nominations are in aggregate less than or equal to the Shipper's Available Active IP Entry Capacity or Available Active IP CSEP Offtake Capacity at the applicable IP Entry Point or IP CSEP Offtake (as the case may be).

  • Processed Quantities for each TAP Shipper indicating the flow direction This information shall be sent by the Initiating TSO using the appropriate edig@s message; if edig@s is unavailable, the Initiating TSO will use the form in Annex 4(a) (Nomination Confirmation Notice).

  • The Matching Process shall describe the communication and processing of the relevant data among the TSOs to calculate the Processed Quantities and Confirmed Quantities of NUs and the quantity of gas that needs to be scheduled to flow at an IP.


More Definitions of Processed Quantities

Processed Quantities means the quantity of gas that the TSO is scheduling for flow, which takes into account the Network User's nomination (respectively re-nomination), contractual conditions and the capacity as defined under the relevant transport contract.
Sample 1Sample 2Sample 3

Related to Processed Quantities

  • processed products means goods placed under a processing procedure which have undergone processing operations;

  • Required Quantity in a unit price Contract shall mean the actual quantity of any item of Work or materials which is required to be performed or furnished in order to comply with the Contract.

  • Contract Quantity means the quantity of Delivered Energy expected to be delivered by Seller during each Contract Year as set forth in Section 3.1(e).

  • Metered Quantity means apparent power, reactive power, active power, with associated time tagging and any other quantity that may be measured by a Party’s Metering Equipment and that is reasonably required by either Party for Security reasons or revenue requirements.

  • Type B quantity means a quantity of radioactive material greater than a Type A quantity.

  • Bill of Quantities means the priced and completed Bill of Quantities forming part of the tender.

  • Daily Quantity means the quantity of waste discharged during an operating day.

  • Bills of Quantities means the priced and completed Bill of Quantities forming part of the tender[where applicable].

  • Type A quantity means a quantity of radioactive material, the aggregate radioactivity of which does not exceed A1 for special form radioactive material or A2 for normal form radio- active material, where A1 and A2 are given in Appendix O or may be determined by procedures described in Appendix O.

  • Finished Products means the fully assembled and shrink-wrapped Licensed Products, each including a Game Cartridge, Game Cartridge label and Printed Materials.

  • Daily Contract Quantity or “DCQ” means the quantity of Gas as set out in Clause 4.1 herein.

  • Supply Point means the point of connection between the licensed network and your apparatus or equipment.

  • Refined Products means gasoline, diesel fuel, jet fuel, asphalt and asphalt products, and other refined products of crude oil.

  • Finished Product means a cannabis product in its final form to be sold at a retail premises.

  • Drug Substance means an active ingredient that is intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure or any function of the human body, but does not include intermediates used in the synthesis of such ingredient.

  • Minimum Order Quantity means the minimum number of batches of a Product to be produced during the same cycle of manufacturing as set forth in a Product Agreement on Schedule B;

  • SCHEDULE OF QUANTITIES, BILL OF QUANTITIES means the Schedule or Quantities as specified and forming part of contract.

  • Maximum Daily Quantity means the daily volume of Gas or Liquids, expressed in 103m3, identified in a Shipper's Interruptible Transportation Service Agreement that Transporter agrees to receive from Shipper under Toll Schedule Interruptible Full Path Service, Toll Schedule Interruptible Receipt Service or Toll Schedule Interruptible Delivery Service, as applicable.

  • Quantity means either tonnage or volume, depending on which term is the standard in the mining industry for the type of mineral;

  • Hemp products means all products made from industrial hemp,

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.

  • Recycled product means a product containing recovered material, or post-consumer recovered material, or both.

  • Feedstock means a solid waste that will readily decompose during the composting process including but not limited to yard waste, agricultural waste, animal waste, food scraps, animal carcasses, raw rendering material, and mixed solid waste.

  • Crude Oil means any liquid hydrocarbon mixture occurring naturally in the earth whether or not treated to render it suitable for transportation and includes:

  • Product Specifications means those Manufacturing, performance, quality - control release, and Fill/Finish specifications for Drug Substance or Licensed Product in the Territory, which are initially as set forth in the applicable Regulatory Approval for a Licensed Product, as such specifications may be amended from time to time pursuant to the terms of this Agreement.

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.