Primary roads definition

Primary roads or “primary road system” means those roads and streets both inside and outside the boundaries of municipalities which are under department jurisdiction.
Sample 1Sample 2Sample 3
Primary roads means those roads and streets both inside and outside the boundaries of the City of Muscatine that are under the Iowa Department of Transportation jurisdiction.
Sample 1Sample 2Sample 3
Primary roads means a road outside urban areas that connects major cities or regions, or both, not classified as part of the comprehensive trans-European road network or as a motorway;
Sample 1Sample 2Sample 3

Examples of Primary roads in a sentence

  • Primary roads will be constructed, reconstructed, and maintained to have adequate drainage control, using structures such as, but not limited to bridges, culverts, drainage pipes, ditches, cross drains, and ditch relief drains designed to safely pass the peak runoff anticipated from a 10 year, 6 hour precipitation event.

  • DESIGN, CONSTRUCTION, MAINTENANCE, AND RECLAMATION SPECIFICATIONS FOR PRIMARY ROADS LOCATION A) Primary roads will be located on ridges or high areas or on the most stable available slopes so as to control and prevent erosion, siltation, flooding, and adverse impacts to fish and wildlife, or their habitat and related environmental values, to the extent possible.

  • CERTIFICATION REQUIREMENTS A) Primary roads will be designed by or under the direct supervision of a qualified registered Professional Engineer experienced in the design and construction of roads, in accordance with the ASMC rules and regulations, and current, prudent engineering practices.

  • According to David Nelson M.D., President of UF Health, when COVID-19 hit, UF had a lot of infrastructure for working with FDOH datasets.

  • Surfacing: Primary roads shall be surfaced with material approved by the Administrator as being sufficiently durable for the anticipated volume of traffic and weight and speed of vehicles using the road.

  • DESIGN REQUIREMENTS A) Primary roads will be designed by or under the direct supervision of a qualified registered Professional Engineer experienced in the design and construction of roads, in accordance with the ASMC rules and regulations, and current, prudent engineering practices.

  • In instances where durable sandstone overburden material from the site is not available or suitable, then durable, non-toxic, non-acid forming material, such as chert, crushed limestone, redrock, and/or crushed sandstone will be hauled in from off site, as approved by the Regulatory Authority and be placed and compacted on the roadbed surface a minimum depth of four(4) inches.F) Primary roads will be constructed with grades as shown on the Detailed Primary Road Design Plans.

  • Class C roads are Primary roads linking provincially important centres to each other or two higher class roads.

  • Primary roads are main roads serving the transport link of motor vehicles.

  • Primary roads make up about 1,798 km, of which 561 km is paved, while the entire secondary road network (2,504 km) and feeder roads (1,425 km) are all unpaved (Table 8).


More Definitions of Primary roads

Primary roads means roads which are:
Sample 1Sample 2Sample 3
Primary roads means Albania’s highways and main road corridors.
Sample 1Sample 2
Primary roads shall conform with the Concept Plan and the cross sections set forth in Exhibit I-1, including the New Road (as defined herein) cross section set forth in Exhibit I-2. “Secondary Roads” shall mean all existing or new roads in the Park which are not Primary or Tertiary, the cross section of which is set forth in Exhibit I-3. “Tertiary Roads” shall mean all roads which are intended to permanently end in a cul-de-sac, the cross-section of which is set forth in Exhibit I-4. All roads will be constructed with a cross-section of material that achieves an equivalent structural value to that of the Village’s standard for “Collector or Industrial” roadways, as otherwise set forth in Exhibit I. All Primary, Secondary, and Tertiary roads in the Village will be generally sited as depicted in the Concept Plan and dedicated to the Village (collectively, “Roads”).
Sample 1
Primary roads means roads that provide access for timber harvesting and remain operational afterprimary forest activities are complete on the area that the roads were intended to access. “Qualified Resource Professional (QRP)” means a registered member in good standing with a professional association whose training, ability and experience makes the member professionally competent in the relevant area of practice.
Sample 1
Primary roads shall have the same meaning as when used in the ------------- Windsystem Construction Agreement defined below.
Sample 1

Related to Primary roads

  • Primary highway means any highway, other than an inter- state highway, at any time officially designated as a part of the fed- eral−aid primary system by the department and approved by the appropriate authority of the federal government.

  • Public School Student Accessing Courses at a Distance means a student who is scheduled for a full course load through the District and attends all classes virtually.

  • Service Road means a road or lane provided at the front, rear or side of a plot for service purpose;

  • Tier 3 Wire Centers means those Qwest Wire Centers that do not meet the criteria for Tier 1 or Tier 2 Wire Centers.

  • Tier 1 Wire Centers means those CenturyLink Wire Centers that contain at least four (4) Fiber- based Collocators, at least thirty-eight thousand (38,000) Business Lines, or both. Tier 1 Wire Centers also are those CenturyLink tandem switching locations that have no line-side switching facilities, but nevertheless serve as a point of traffic aggregation accessible by CLEC. Once a Wire Center is determined to be a Tier 1 Wire Center, that Wire Center is not subject to later reclassification as a Tier 2 or Tier 3 Wire Center.

  • Host means any plant or animal on or in which another lives for nourishment, development, or protection.

  • OTP means One Time Password

  • Serving Wire Center (SWC means the Wire Center that serves the area in which the other Party’s or a Third Party’s Wire Center, aggregation point, point of termination, or point of presence is located.

  • Frontage means and refer to all the property on one side of a street between two intersecting streets measured along the line of the street, or if the street is dead-ended, then all of the property abutting on one side between an intersecting street and the dead end of the street.

  • Serving Wire Center (SWC) means a Wire Center that serves the area in which the other Party’s or a third party’s Wire Center, aggregation point, point of termination, or point of presence is located.

  • Transit Passenger means a passenger who arrives at the airport in an aircraft and departs from the airport in the same aircraft, where such an aircraft is operating a through flight transiting the airport, and includes a passenger in transit through the airport who has to depart in a substituted aircraft because the aircraft on which the passenger arrived has been declared unserviceable.

  • the trunk road means the A590 Trunk Road;

  • Electric power-assisted bicycle means a vehicle that travels on not more than three wheels in

  • Passenger Services means the Franchisee's railway passenger services as specified in any Timetable and/or Plan of the Day including those railway passenger services which the Franchisee may delegate or subcontract or otherwise secure through any other person from time to time in accordance with the Franchise Agreement;

  • Municipal Separate Storm Sewer System Management Program means a management program covering the duration of a state permit for a municipal separate storm sewer system that includes a comprehensive planning process that involves public participation and intergovernmental coordination, to reduce the discharge of pollutants to the maximum extent practicable, to protect water quality, and to satisfy the appropriate water quality requirements of the CWA and regulations, and this article and its attendant regulations, using management practices, control techniques, and system, design, and engineering methods, and such other provisions that are appropriate.

  • Directory Assistance Database shall have the meaning set forth in Sections 10.5.2.2, 10.5.2.8, and 10.5.2.9.

  • Universal Digital Loop Carrier (UDLC means the DLC system that has a CO terminal channel bank that is connected to the CO switches on the analog side.

  • Nationwide Mortgage Licensing System and Registry means a mortgage licensing system developed and maintained by the conference of state bank supervisors and the American association of residential mortgage regulators for the licensing and registration of licensed mortgage loan originators.

  • Primary Residence means an Insured’s fixed, permanent and main home for legal and tax purposes.

  • Tier 2 Wire Centers means those CenturyLink Wire Centers that are not Tier 1 Wire Centers, but contain at least three (3) Fiber-based Collocators, at least twenty-four thousand (24,000) Business Lines, or both. Once a Wire Center is determined to be a Tier 2 Wire Center, that Wire Center is not subject to later reclassification as a Tier 3 Wire Center.

  • Integrated Digital Loop Carrier means a subscriber loop carrier system that is twenty-four (24) local Loop transmission paths combined into a 1.544 Mbps digital signal which integrates within the switch at a DS1 level.

  • SAIC means the State Administration for Industry and Commerce of the PRC and/or its regional and local counterparts.

  • Local Interconnection Trunks/Trunk Groups means the trunks that are used for the termination of Local Exchange Traffic, pursuant to iconectiv Technical Reference GR 317-CORE.

  • Backsiphonage means the flow of water or other liquids, mixtures or substances into the potable water system from any source other than its intended source, caused by the reduction of pressure in the potable water system.

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Shadow tray means a device attached to the radiation head to support auxiliary beam blocking material.