Power Quality Standards definition

Power Quality Standards means the Power Quality Standards established by NERC, MISO, Buyer, IEEE-SA, National Electric Safety Code, the National Electric Code, and their respective successor organizations or codes, as they may be amended or superseded from time to time, and consistent with Good Utility Practice.
Sample 1Sample 2Sample 3
Power Quality Standards means the Power Quality Standards established by NERC, WECC, Buyer, IEEE-SA, National Electric Safety Code, the National Electric Code, or their respective successor organizations or codes as they may be amended from time to time and consistent with Good Utility Practice.
Sample 1Sample 2Sample 3
Power Quality Standards means Company’s currently effective and applicable power quality standards contained in the Company’s Engineering Handbook as specified at https://www.rockymountainpower.net/con/pqs.html. The Power Quality Standards may be amended from time to time by Company.
Sample 1Sample 2Sample 3

Examples of Power Quality Standards in a sentence

  • Supplier shall cause the Energy of the Generating Facility to meet the Power Quality Standards at all times, and shall operate the Generating Facility consistent with WECC, NERC, Buyer, Control Area Operator and Transmission Provider requirements.

  • By Order dated June 11, 2001 (Docket No. EX99030182), the BPU adopted Interim Net Metering, Safety and Power Quality Standards for wind and solar photovoltaic systems pursuant to the Electric Discount and Energy Competition Act, P.L. 1999, c.23.

  • Power Quality Standards • ANSI C84.1-1989 American National Standards for Electric Power Systems and Equipment Ratings (60 Hertz).

  • Until such time, the TSP shall strive to maintain the Transmission System performance within the limits and ranges as specified in this section.2.4.1.2 Users shall ensure that their Plant and Apparatus at Connection Points are also designed and operated such that these operate satisfactorily within the specified limits and ranges to be set out in the Minimum National Power Quality Standards.

  • Thus students will have to attempt 5 questions out of 9 questions.Section -A INTRODUCTION TO ELECTRICAL POWER QUALITY:Definition of Power Quality, Power Quality Issues, Power Quality v/s Equipment Immunity, Electric Power Quality Standards.

  • The proposed Customer-Generator's System must comply with City Utilities’ Power Quality Standards, Service Standards, and Rules and Regulations.

  • EPRI, Power Quality Standards: CBEMA, ITIC, SEMI F47, IEC 61000-4-11/34, available at https://www.sceg.com/docs/librariesprovider5/pdfs/powerqualitystandards.pdf.

  • ISO intends to engage with Power Quality Standards agencies (IEEE, ANSI) to analyze the impact of any additional Power Quality issues that may be caused by inverter-based variable energy generation.

  • Survey of Power Quality Standards and Regulations in India and abroad, by Prof.G. Bhuvaneswari and Prof.

  • Also consult the Power Quality Standards for Electric Service.Wired-radio, or any related means of transmitting information, shall not be connected or coupled to the Company's lines except by special arrangement with the Company.Consult the Company for service to commercial radio, television and cellular facilities.


More Definitions of Power Quality Standards

Power Quality Standards means the power quality standards established or otherwise enforced by NERC, MISO, IEEE-SA, National Electric Safety Code, or the National Electric Code (including their respective successor organizations or codes) and that apply to the Generating Facility, including any power quality standards imposed pursuant to the terms of the Interconnection Agreement or by the Transmission Owner, as applicable, in each case as they may be amended, restated, superseded, supplemented, or otherwise modified from time to time.
Sample 1Sample 2
Power Quality Standards means Company's currently effective and applicable power quality standards contained m the Company's Engineering Handbook as specified at
Sample 1
Power Quality Standards means the power quality standards established or otherwise enforced by NERC, MISO, IEEE-SA, National Electric Safety Code, or the National Electric Code (including their respective successor organizations or codes) and that apply to the Generating Facility, including any power quality standards imposed pursuant to the terms of the Interconnection Agreement or by the Distribution Provider or Transmission
Sample 1
Power Quality Standards means Company’s currently effective and applicable power quality standards contained in the Company’s Engineering Handbook as specified at xxxxx://xxx.xxxxxxxxxxxxxxxxxx.xxx/con/pqs.html. The Power Quality Standards may be amended from time to time by Company.
Sample 1

Related to Power Quality Standards

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Water quality volume means the volume equal to the first one-half inch of runoff multiplied by the impervious surface of the land development project.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Water quality means the physical characteristics of water within shoreline jurisdiction, including water quantity, hydrological, physical, chemical, aesthetic, recreation-related, and biological characteristics. Where used in this chapter, the term "water quantity" refers only to development and uses regulated under this chapter and affecting water quantity, such as impermeable surfaces and storm water handling practices. Water quantity, for purposes of this chapter, does not mean the withdrawal of ground water or diversion of surface water pursuant to RCW 90.03.250 through 90.03.340.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • High Quality Waters means all state waters, except:

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Radiopharmaceutical quality assurance means, but is not limited to, the performance of appropriate chemical, biological, and physical tests on potential radiopharmaceuticals and the interpretation of the resulting data to determine their suitability for use in humans and animals, including internal test assessment, authentication of product history, and the keeping of proper records.

  • General air quality operating permit or "general permit" means an air quality operating permit that meets the requirements of ARM 17.8.1222, covers multiple sources in a source category, and is issued in lieu of individual permits being issued to each source.

  • Availability Standards has the meaning set forth in the CAISO Tariff.

  • HITECH means the Health Information Technology for Economic and Clinical Health Act.

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.

  • Technical Standards means the technical standards set out in paragraph 2.4 of the Order Form;

  • State minimum standards means minimum requirements