Pollution control technology definition

Pollution control technology means the pollution control devices, production processes, fuel combustion processes or other means that effectively prevent or reduce emissions or effluent;
Pollution control technology means pollution control devices or apparatus, processes, or other means that effectively prevent, control or reduce pollution of water caused by effluents and other discharges, from any point source at levels within the water pollution standards.

Examples of Pollution control technology in a sentence

  • Pollution control technology- means pollution control devices or apparatus, processes, or other means that effectively prevent control or reduce pollution of water caused by effluents and other discharges, from any point source at levels within the water pollution standards.

  • Pollution control technology can reduce mercury emissions from these combustors.

  • Pollution control technology manufacturing and servicing (installation) is considered as an ecobusiness (OECD 1999).

  • Pollution control technology was not applied in the CCEE and NIS and, because of unrealistic subsidies, energy efficiency was not important.

  • Pollution control technology compliance by diesel-fueled vehicles with specified gross vehicle weight rating; Refusal of registration for certain diesel-fueled vehicles subject to specified emissions reduction requirements 732 § 4000.17.

  • Pollution control technology of production/process correction is ambiguous with tacit knowledge exchange and is hard to be copied.There are different advanced environmental management practices such as green manufacturing, green procurement, green packaging, green and reverse logistics..

  • Staff contacted all National Standard-setters that had been involved in the production of the Discussion Paper (Australia, Canada, Norway and South Africa).

  • Pollution control technology was not highly developed at the time in North America, and combined sewers discharging directly to the rivers were used throughout the city.

  • The DPR will continue to exercise general control on technical review and approval for design, fabrication and the installation of all relevant oil and gas facilities.Issues relating to Waste Minimization and Pollution control technology should be discussed by a technical committee involving FMoE, NMA and the DPR, set up for that purpose.

  • Integrates discussions and considerations regarding diversity and culture throughout clinical work.

Related to Pollution control technology

  • Clean coal technology means any technology, including technologies applied at the precombustion, combustion, or post combustion stage, at a new or existing facility which will achieve significant reductions in air emissions of sulfur dioxide or oxides of nitrogen associated with the utilization of coal in the generation of electricity, or process steam which was not in widespread use as of November 15, 1990.

  • Innovative control technology means any system of air pollution control that has not been adequately demonstrated in practice, but would have a substantial likelihood of achieving greater continuous emissions reduction than any control system in current practice or of achieving at least comparable reductions at lower cost in terms of energy, economics, or non-air quality environmental impacts.

  • Pollution control project means any activity or project at an existing electric utility steam generating unit for purposes of reducing emissions from such unit. Such activities or projects are limited to:

  • Air pollution control equipment means a mechanism, device, or contrivance used to control or prevent air pollution, that is not, aside from air pollution control laws and administrative regulations, vital to production of the normal product of the source or to its normal operation.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Best available control technology (BACT means an emissions limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under CAA which would be emitted from any proposed major stationary source or major modification which the Department, on a case-by-case basis, takes into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 7 DE Admin. Code 1120 and 1121. If the Department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard, or combination thereof, may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results.

  • Information Technology Resources means agency budgetary resources, personnel, equipment, facilities, or services that are primarily used in the management, operation, acquisition, disposition, and transformation, or other activity related to the lifecycle of information technology; acquisitions or interagency agreements that include information technology and the services or equipment provided by such acquisitions or interagency agreements; but does not include grants to third parties which establish or support information technology not operated directly by the Federal Government. (0MB M-15-14)

  • Stormwater Pollution Prevention Plan or "SWPPP" means a document that is prepared in accordance with good engineering practices and that identifies potential sources of pollutants that may reasonably be expected to affect the quality of stormwater discharges from the construction site, and otherwise meets the requirements of this Ordinance. In addition the document shall identify and require the implementation of control measures, and shall include, but not be limited to the inclusion of, or the incorporation by reference of, an approved erosion and sediment control plan, an approved stormwater management plan, and a pollution prevention plan.

  • Collaboration Technology means the Collaboration Know-How and the Collaboration Patents.

  • Alternative energy technology means equipment, component parts, materials, electronic devices, testing equipment, and related systems that are specifically designed, specifically fabricated, and used primarily for 1 or more of the following:

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.

  • Best available control technology or “BACT” means an emissions limitation, including a visible emissions standard, based on the maximum degree of reduction for each regulated NSR pollutant which would be emitted from any proposed major stationary source or major modification which the reviewing authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combination techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 567—subrules 23.1(2) through 23.1(5) (standards for new stationary sources, federal standards for hazardous air pollutants, and federal emissions guidelines), or federal regulations as set forth in 40 CFR Parts 60, 61 and 63 but not yet adopted by the state. If the department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard or combination thereof may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation and shall provide for compliance by means which achieve equivalent results.

  • Radiologic technologist, limited means an individual, other than a licensed radiologic technologist,

  • Storm Water Pollution Prevention Plan means a document which describes the on- site program activities to utilize BMPs to eliminate or reduce pollutant discharges to the storm water conveyance system to the maximum extent practicable.

  • Temporary clean coal technology demonstration project means a clean coal technology demonstration project that is operated for a period of five years or less and that complies with the SIP and other requirements necessary to attain and maintain the national ambient air quality standards during the project and after the project is terminated.

  • Emergency medical technician means a person who is either an EMT-I, EMT-II, or EMT-P (paramedic), and possesses a valid certificate or license in accordance with the standards of Division 2.5 (commencing with Section 1797) of the Health and Safety Code.

  • Nail technician means any person who for compensation manicures or pedicures natural nails, or who performs artificial nail services for compensation, or any combination thereof.

  • Information Technology (IT) System means the combination of hardware components, software, and other equipment to make a system whose core purpose is to accomplish a data processing need such as the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission or reception of data. IT systems include ground systems in support of flight hardware. IT systems do not include—

  • Communication technology means an electronic device or process that:

  • Genetic services means a genetic test, genetic counseling (including obtaining, interpreting, or assessing genetic information), or genetic education.

  • Emergency Medical Technician (EMT means: an individual licensed with cognitive knowledge and a scope of practice that corresponds to that level in the National EMS Education Standards and National EMS Scope of Practice Model.

  • Indigenous Peoples Planning Framework or “IPPF” means the indigenous peoples planning framework for the Investment Program, including any update thereto, agreed between the Borrower and ADB and incorporated by reference in the FFA;

  • Blockchain technology means the use of a digital database containing records of

  • Information Technology means computers, software, databases, firmware, middleware, servers, workstations, networks, systems, routers, hubs, switches, data communications lines, and all other information technology equipment and associated documentation.

  • Nodal Ministry means the Ministry or Department identified pursuant to this order in respect of a particular item of goods or services or works.

  • Pollution control facilities means water and air pollution control equipment and solid waste disposal facilities or any of them.