Plasticity definition

Plasticity means the ability of a soil sample to be rolled into a wire shape with a diameter of 3 mm without crumbling.
Plasticity means the property of a soil which allows it to be deformed beyond the point of recovery without cracking or appreciable volume change.
Plasticity means that property of soil that allows it to be deformed or molded without crumbling (e.g., like dough or soft rubber). This property reflects the capacity of soil to absorb moisture.

Examples of Plasticity in a sentence

  • Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index of Soils.

  • ASTM D 4318 Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index of Soils.

  • Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils.

  • Test Method for Liquid Limit, Plastic Limit, and Plasticity Index of Soils.

  • The Plasticity Index requirement shall not apply if filler is cement or lime.

  • There was a slight delay in penetration with a blunted tip, then the tip passed through with a popping sound and a sudden release of stress as the ASPN tore the material.

  • TABLE 1 TESTAASHTO DESIGNATIONDry Preparation of Disturbed SoilsT-87Particle Size Analysis of SoilsT-88Determining the Liquid Limit of SoilsT-89Determining the Plastic Limit and Plasticity Index of SoilsT-90 Moisture Density Test Based on the criteria set in Table 2, below, the Design-Build Team shall perform the Moisture Density Tests, using either lime or cement.

  • Material approved from on site or off site sources having a minimum dry density of 1760 kg/m3 (110 pcf), a maximum Plasticity Index of 15, and a maximum Liquid Limit of 40.

  • Fills: Materials approved from on site and off site sources having a minimum dry density of 1760 kg/m3 (110 pcf), a maximum Plasticity Index of 6, and a maximum Liquid Limit of 30.

  • Plasticity in gray and white: neuroimaging changes in brain structure during learning.

Related to Plasticity

  • Plastic means material which contains as an essential ingredient a high polymer, such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, polybutylene terephthalate ;

  • Plastics means synthetic materials chemically formed by the polymerization of organic (carbon-based) substances. Plastics are usually compounded with modifiers, extenders, and/or reinforcers and are capable of being molded, extruded, cast into various shapes and films or drawn into filaments.

  • Nonambulatory means a person who immediately and without the aid of another is not physically and mentally capable of traveling a normal path to safety, including the ascent and descent of stairs.

  • Bag means a flexible packaging made of paper, plastics film, textiles, woven material or other suitable material;

  • Microbusiness means a licensee that may act as a cannabis

  • Ambulatory means the condition of a person who immediately and without aid of another is physically or mentally capable of traveling a normal path to safety, including the ascent and descent of stairs.

  • Fabricating means to make, build, create, produce, or assemble components or property to work in a new or different manner.

  • Fabrication means making up data or results and recording or reporting them.

  • Adhesive means any chemical substance that is applied for the purpose of bonding two surfaces together other than by mechanical means.

  • Propellant means a liquefied or compressed gas that is used in whole or in part, such as a cosolvent, to expel a liquid or any other material from the same self-pressurized container or from a separate container.

  • Strate means a Central Securities Depository operated by Strate Proprietary Limited, registration number 1998/022242/07, a private company incorporated in accordance with the laws of South Africa;

  • Polychlorinated biphenyls means aromatic compounds formed in such a manner that the hydrogen atoms on the biphenyl molecule (two benzene rings bonded together by a single carbon-carbon bond) may be replaced by up to ten chlorine atoms; and

  • Verifier shall have the meaning specified in Section 3.4(c) of the Facility Lease.

  • Disinfection profile means a summary of Giardia lamblia inactivation through the treatment plant.

  • Ambulatory review means utilization review of health care services performed or provided in an outpatient setting.

  • Pathogen means an organism that is capable of producing an infection or disease in a susceptible host.

  • Colorant means any pigment or coloring material used in a consumer product for an aesthetic effect, or to dramatize an ingredient.

  • Specialty means a broad, population-based focus of study encompassing the common health-related problems of a particular group of patients and the likely co-morbidities, interventions, and responses to those problems.

  • Color means the term refers to the apparent pigmentation of the skin, especially as an indication or possible indication of race.

  • Undercoating means any aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, and/or firewall of motor vehicles to prevent the formation of rust or to deaden sound. “Undercoating” includes, but is not limited to, rubberized, mastic, or asphaltic products.

  • Carton means 10 packs of cigarettes, each containing 20 cigarettes or eight packs, each containing

  • Disinfection means a process which inactivates pathogenic organisms in water by chemical oxidants or equivalent agents.

  • Cannabis means all parts of the plant Cannabis sativa Linnaeus, Cannabis indica, or Cannabis ruderalis, whether growing or not; the seeds thereof; the resin, whether crude or purified, extracted from any part of the plant; and every compound, manufacture, salt, derivative, mixture, or preparation of the plant, its seeds, or resin. “Cannabis” also means the separated resin, whether crude or purified, obtained from cannabis. “Cannabis” does not include the mature stalks of the plant, fiber produced from the stalks, oil or cake made from the seeds of the plant, any other compound, manufacture, salt, derivative, mixture, or preparation of the mature stalks (except the resin extracted therefrom), fiber, oil, or cake, or the sterilized seed of the plant which is incapable of germination. For the purpose of this division, “cannabis” does not mean “industrial hemp” as defined by Section 11018.5 of the Health and Safety Code. Cannabis and the term “marijuana” may be used interchangeably.

  • Tobacco paraphernalia means any item designed for the consumption, use, or preparation of Tobacco Products.

  • PCBs means polychlorinated biphenyls.

  • Radiation therapist means a person, other than a Licensed Practitioner or Nuclear Medicine Technologist, who applies radiation to humans for therapeutic purposes under the supervision of a Licensed Practitioner;