Plascon definition

Plascon or other equally approved gypsum and plaster primer (PP700) and two coats professional super matt (PEM 900/TSA) for interior use 1 Ceilings including priming metal cover strips and nailheads m2 338 2 75mm Cornices m 181 One coat primer, one coat universal undercoat and two coats "Plascon Velvaglo Polyurethane Enamel" or equal and approved paint 3 On fascia and barge boards
Plascon or other equally approved primer, one coat alkyd based universal undercoat and two coats professional gloss enamel paint 5 On doors m2 161 Two coats superior quality "Plascon" or other equally approved WoodCare Interior ultra varnish 6 Skirting, rails, etc. not exceeding 300mm girth m 124 "Plascon" or other approved clear timber protective sealer as per manufacturer's reccomendation 7 On laminated beams m2 19 8 On exposed trusses m2 38 Section No. 3 Bill No. 9 Paintwork
Plascon or other approved clear timber protective sealer as per manufacturer's reccomendation 7 On laminated beams m2 19 8 On exposed trusses m2 38

Examples of Plascon in a sentence

  • Prime with one coat of Plascon Plaster Primer (UC 56) with an overcoating time of 16 hours and finish with two coats of Polvin Super Acrylic (EPL) with 1 hour drying time between coats, for a maintenance cycle of 5 years in a C1 - inland environment.

  • Spot prime bare areas with Plascon Coastcote Primer Red Oxide (SNK 2) and allow 1 hour to dry.

  • Remove rust conerter with clean water and apply either Plascon Universal Unsercoat (UC1) or Professional Undercoat (PU800) to bare and repaired areas.

  • Apply one coat "Plascon Wood Primer (UC2)", one coat "Plascon Universal Undercoat (UC1)" and two coats "Plascon Polyurethane Velvaglo (VLO) paint according to manufacturers specifications.

  • Finish with two coats of Nuroof Acrylic Roof Paint (TRP) or Dulux Roofguard (Code: D8) with an Clean, prepare and seal roof covering, Spot prime bare areas with Plascon Coastcote Primer Red Oxide (SNK 2), Finish with two coats of Nuroof Acrylic Roof Paint (TRP) or Dulux Roofguard (Code: D8) 4 On corrugated roof sheeting.

  • Prime with one coat of Plascon Plaster Primer (UC 56) with an overcoating time of 16 hours and finish with two coats of Sure Coat Gloss Enamel (SGE) with 16 hours drying time between coats, for a maintenance cycle of 2 years in a C1 - inland environment.

  • PAINTWORK ETC TO NEW WORK ON PLASTER, ETC: Prepare surfaces, stop and remove all loose material, apply one coat 'Plascon plaster primer, one coat universal undercoat and two coats 'Plascon Wall and All Pure Acrylic' paint: 1 On plastered walls internally.

  • Plascon Polvin Super Acrylic to interior new cement plaster (NW 205).Surface to be dry, sound and clean and cured for a minimum of 14 days, with a moisture content measured with a Doser Hygrometer (or equivalent), of BD 2 scale - 8% or less.

  • Prime with one coat of Plascon Plaster Primer (UC 56) with an overcoating time of 16 hours and finish with two coats of Sure Coat Gloss Enamel (SGE) with 16 hours drying time between coats, for a maintenance cycle of 4 years in a C1 - inland environment.

  • Allow to dry and prime with one coat primer and two coats polyurethane enamel paint on steel: E On windows m² 13 F On window burglar bars m² 13 Apply one coat "Galvogrip" or equivalent self etching metal primer and two coats "Plascon" or equivalent velvaglo polyurethane satin gloss enamel paint to manufacturers specification, colour to later selection.


More Definitions of Plascon

Plascon or other equally approved gypsum and plaster primer (PP700) and two coats professional super matt (PEM 900/TSA) for interior use 1 Ceilings and cornices, including priming metal m2 5 Bill No. 3 Paintwork Alterations Ceilings and Partitions Paintwork Section No. 2 Amount R
Plascon or other equally approved one coat red oxideon primer, one coat alkyd based universal undercoat and two coats professional gloss enamel (PBS 1000) paint
Plascon or other equally approved gypsum and plaster primer (PP700) and two coats professional super matt (PEM 900/TSA) for interior use 3 Ceilings and cornices, including priming metal m2 282 4 ▇▇▇▇▇ closure m2 105 "Plascon" or other approved alkali resistant primer and two coats "Nu-Roof" emulsion paint for exterior use 5 Fascias and barge boards m2 63 Bill No. 7 Paintwork Item No BILL NO. 8 Unit Quantity Rate PROVISIONAL SUMS SUPPLEMENTARY PREAMBLES General Unless otherwise described, all prime cost amounts and provisional sums exclude the cash discount of 5% and include for delivery to site of all articles concerned All prime cost amounts and provisional sums are net and include for delivery to site of all articles concerned ELECTRICAL 1 Provide an amount of R130,000.00 (One Hundred and Thirty Thousand Rand) for electrical works Item 2 Profit on above item % 3 Attendance on ditto % Carried Forward to Summary of Section No. 3 Section No. 3 Bill No. 8 Provisional Sums R 130,000.00 Bill No SECTION SUMMARY - Block B - 4 Classroom Block Page No 1 Alterations 37 2 Roof Coverings 41 3 Carpentry & Joinery 44 4 Ceilings and Partitions 46 5 Plumbing and Drainage 47 6 Glazing 48 7 Paintwork 51 8 Provisional Sums 52 Section No. 3 Amount R Demolish and remove to a dump site to be located by the contractor 1 Brick building approximate size 25000 x 9800 x 3000mm high formed of clay brick walls, timber roof construction, metal roof sheeting, walkway steel posts, gypsum board ceilings, metal windows, burglar guard, metal door frame, timber doors, gate, electrical to be disconnected, concrete floors, grubbing up foundations, etc. and level off area. No 1 Bill No. 1 Demolition of Existing 3 Classroom Block 1 Proposed new 3 classroom block as per ▇▇ ▇▇▇ norms and standards approximate size 260m2 m2 260 Bill No. 2 Proposed New 3 Classroom Block
Plascon or other equally approved gypsum and plaster primer (PP700) and two coats professional super matt (PEM 900/TSA) for interior use 1 Ceilings including priming metal cover strips and nailheads m2 259 2 75mm Cornices m 198 One coat primer, one coat universal undercoat and two coats "Plascon Velvaglo Polyurethane Enamel" or equal and approved paint 3 On ceilings m2 83 4 On fascia and barge boards m 92 "Plascon" or other equally approved primer, one coat alkyd based universal undercoat and two coats professional gloss enamel paint 5 On doors m2 16 Two coats superior quality "Plascon" or other equally approved WoodCare Interior ultra varnish 6 Skirting, rails, etc. not exceeding 300mm girth m 52

Related to Plascon

  • Panchayat means an institution (by whatever name called) of self-government constituted under article 243B, for the rural areas;

  • SAMR means the State Administration for Market Regulation of the PRC or, with respect to the issuance of any business license or filing or registration to be effected by or with the State Administration for Market Regulation, any Governmental Authority which is similarly competent to issue such business license or accept such filing or registration under the Laws of the PRC.

  • STU means the Board or the Government company notified by the respective State Government under Sub-section (1) of Section 39 of the Act;

  • pH means the logarithm of the reciprocal of the weight of hydrogen ions in grams per liter of solution.

  • Roomer means a person occupying a dwelling unit that lacks a major bathroom or kitchen facility, in a structure where one or more major facilities are used in common by occupants of the dwelling unit and other dwelling units. Major facility in the case of a bathroom means toilet, or either a bath or shower, and in the case of a kitchen means refrigerator, stove or sink.