Operations and Maintenance Requirements definition

Operations and Maintenance Requirements means (i) the “Operational Requirements,” set forth as Part C of the Requirements and Provisions for Work and (ii) the “Maintenance Requirements,” set forth as Part D of the Requirements and Provisions for Work; in each case, as may be amended, revised, supplemented or otherwise modified from time to time.
Operations and Maintenance Requirements shall have the meaning given to that term in Clause 9.2(b); BLACKED OUT

Examples of Operations and Maintenance Requirements in a sentence

  • General modeling guidance is provided in Appendix F.● Minimum Construction Requirements: describes critical considerations during construction of the BMP, such as erosion control, landscape stabilization, and timing of BMP installation.● Operations and Maintenance Requirements: provides a reference to the operations and maintenance (O&M) requirements included in Appendix G.

  • Included shall be the contact information of the person responsible for the Operation and Maintenance in accordance with Section 313 BMP Operations and Maintenance Requirements.

  • Municipal Stormwater Control and BMP Operation and Maintenance Fund and Inspection and BMP Operations and Maintenance Requirements A.

  • MIRA shall have the right periodically to engage an inspecting engineer to determine the Facility is in good and acceptable condition in accordance with Applicable Law, Good Industry Practice, Good and Accepted Operating Practice, the Operation and Maintenance Manual, the Operations and Maintenance Requirements set forth in Appendix D, the Performance Guarantees, and any other applicable requirements of the Contract.

  • Commentary: The Operations and Maintenance Requirements in the Engineering Manual were added to the code to ensure that all structural controls installed in compliance with the MS4 permit are operated and maintained to meet site performance or alternative treatment standards.

  • The Contractor, at its expense, shall provide uninterrupted operation of the Facility in accordance with Applicable Law, Good Industry Practice, Good and Accepted Operating Practice, the Operation and Maintenance Manual, the Operations and Maintenance Requirements set forth in Appendix D, the Performance Guarantees, and any other applicable requirements of the Contract.

  • After FA, the Operations and Maintenance Requirements for post-construction CMs are the ongoing responsibility of the property owner (Part One, Section 14.7).

  • It shall stress all the capabilities defined in "Operations and Maintenance Requirements" above.

  • The current status of site characteristics that are relevant to “Engineered Controls, Operations and Maintenance Requirements, and Emergency/Contingency Planning” include, but are not limited to, the following:• Engineered controls are identified in the appropriate CERCLA regulatory documents, including the RODs and associated O&M Plans.• O&M activities are documented in the appropriate O&M Plans.

  • Table 5-1 Pressurized and Unpressurized ISS ORUs UnpressurizedPressurized5.1.1.2 Fluids ServicingThe contractor shall perform fluids servicing in compliance with approved Operations and Maintenance Requirements Specifications (OMRS), drawings, specifications, and applicable pressure vessel safety standards as stated in PWS Section 6.4.1. Fluids servicing includes production of ISS water for ORUs and component flushing.

Related to Operations and Maintenance Requirements

  • Operations and maintenance means a project delivery method in which the District enters into a single contract for the routine operation, routine repair, and routine maintenance of an infrastructure facility.

  • Maintenance Requirements shall have the meaning set forth in Clause 14.2;

  • Operation and Maintenance or “O&M” shall mean all activities required to operate, maintain, and monitor the effectiveness of the RA as specified in the SOW or any EPA-approved O&M Plan.

  • Planned Maintenance means any Maintenance BT has planned to do in advance.

  • Operation and Maintenance Costs means the costs of:

  • Operation and Maintenance Expenses or ‘O&M expenses' means the expenditure incurred on operation and maintenance of the project, or part thereof, and includes the expenditure on manpower, repairs, spares, consumables, insurance and overheads;

  • Routine maintenance means actions performed on a regular or controllable basis or in response to uncontrollable events upon a highway, road, street, or bridge. Routine maintenance includes, but is not limited to, 1 or more of the following:

  • Maintenance and Operations Revenue or “M&O Revenue” means (i) those revenues which the District receives from the levy of its annual ad valorem maintenance and operations tax pursuant to Section 45.002 of the TEXAS EDUCATION CODE, or other lawful authority, and Article VII § 3 of the TEXAS CONSTITUTION, plus (ii) all State revenues to which the District is or may be entitled under the applicable provisions of the TEXAS EDUCATION CODE or any other statutory provision as well as any amendment or successor statute to these provisions, as applicable, less

  • Scheduled Maintenance means any adjustment, repair, removal, disassembly, cleaning, or replacement of components or systems required by the manufacturer which is performed on a periodic basis to prevent part failure or equipment or engine malfunction, or anticipated as necessary to correct an overt indication of malfunction or failure for which periodic maintenance is not appropriate.

  • Maintenance Adder means an adder that may be included to account for variable operation and maintenance expenses in a Market Seller’s Fuel Cost Policy. The Maintenance Adder is calculated in accordance with the applicable provisions of PJM Manual 15, and may only include expenses incurred as a result of electric production. Manual Load Dump Action:

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under §175A of the CAA, as amended.

  • Maintenance work means the repair of existing facilities when the size, type or extent of such facilities is not thereby changed or increased. While “maintenance” includes painting and decorating and is covered under the law, it does not include work such as routine landscape maintenance or janitorial services.

  • Deferred Maintenance means improvements necessary for continued operations which do not improve productivity or alter the process technology.

  • Insurance Requirements means, collectively, all provisions of the Insurance Policies, all requirements of the issuer of any of the Insurance Policies and all orders, rules, regulations and any other requirements of the National Board of Fire Underwriters (or any other body exercising similar functions) binding upon each Loan Party which is an owner of Mortgaged Property and applicable to the Mortgaged Property or any use or condition thereof.

  • Emergency Maintenance means any period of maintenance for which, due to reasons beyond its reasonable control, Sprint Convergence is unable to provide prior notice of.

  • Maintenance Schedule means a document which describes the specific scheduled maintenance tasks and their frequency of completion necessary for the safe operation of those aircraft to which it applies;

  • Project Requirements means the statement included in the Request for Proposal detailing the technical and other requirements of Canada which are to be met by the successful Bidder, and which are to be addressed in the Bid;

  • Retail Service and Maintenance Sector Means the service and maintenance of retail facilities which includes financial institutions, retail businesses, schools and hospitals but does not include commercial premises as defined.

  • Debt Service Requirements means the aggregate principal payments (whether at maturity or pursuant to scheduled mandatory sinking fund redemption requirements) and interest payments on the Bonds for the period of time for which calculated; provided, however, that for purposes of calculating such amount, principal and interest shall be excluded from the determination of Debt Service Requirements to the extent that such principal or interest is payable from amounts deposited in trust, escrowed or otherwise set aside for the payment thereof with the Paying Agent or other commercial bank or trust company located in the State and having full trust powers.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Maintenance Window means the weekly maintenance windows for the Cloud Service identified in xxxxx://xxxxxxx.xxx.xxx/maintenance-windows. SAP may update the Maintenance Window from time to time in accordance with the Agreement.

  • General Conditions Cost means costs incurred and minor work performed by Contractor without the need for competitive bids/proposals. The allowable General Conditions items are limited in Paragraph 11.1 and are further described on Exhibit “D”. The maximum allowable General Conditions Cost payable to Contractor during the Construction Phase of the Project is set out in Exhibit “A” attached to this Agreement.

  • Major maintenance means the adjustment, repair or replacement of a component or module that could affect the accuracy of a measurement.

  • Maintenance and Support means updates, upgrades, patches, fixes, etc. and technical support provided for the Products and Services that Supplier is required to provide directly to DXC or a DXC Customer.

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Maintenance and Support Services means the services provided by Contractor under Appendix F.